Electronics > Electronics Accessories > Accessories > Magnum Energy ME-BMK-NS Battery Monitoring Kit without DC Shunt, Work with ME, MS, MS-AE and RD Series Inverters, Kit includes: Sense module, Twisted pair wire 5 length, 18 AWG wire and Communication cable 10 length, 2-conductor, telephone standard, 7 to 70 (+/-0.5%) auto voltage detection DC volts, +/-0.1 to 999 (+/-1.0%) DC amps (MEBMKNS MEBMK-NS ME-BMKNS ME-BMK)
|
|
Magnum Energy ME-BMK-NS Battery Monitoring Kit without DC Shunt, Work with ME, MS, MS-AE and RD Series Inverters, Kit includes: Sense module, Twisted pair wire 5 length, 18 AWG wire and Communication cable 10 length, 2-conductor, telephone standard, 7 to 70 (+/-0.5%) auto voltage detection DC volts, +/-0.1 to 999 (+/-1.0%) DC amps (MEBMKNS MEBMK-NS ME-BMKNS ME-BMK)
SKU: MEBMKNS
Brand: Magnum Energy
|
|
|
|
|
Retrieving current price...
Add to
Cart Qty:
|
|
Estimate
Shipping Cost: Choose the quantity to add to cart, press the "Add to Cart" button and in the
Shopping Cart press
"Calculate Shipping".
Availability:
In Stock (see Disclaimer below).
|
|
|
|
Magnum Energy ME-BMK-NS Battery Monitoring Kit
without DC Shunt,
Work with ME, MS, MS-AE and RD Series Inverters, Kit includes: Sense module, Twisted pair wire 5 length, 18 AWG wire and
Communication cable 10 length, 2-conductor, telephone standard, 7 to 70
(+/-0.5%) auto voltage detection DC volts, +/-0.1 to 999 (+/-1.0%) DC amps, Amp
hours in/out +/-32,768 amp hours (1 AH increments)
General Information |
Manufacturer |
Magnum Energy |
Manufacturer Part Number |
ME-BMK-NS |
Product Name |
Battery Monitoring Kit without DC Shunt |
Marketing Information |
The ME-BMK-NS
(Battery Monitor Kit - No Shunt)* from Magnum Energy gives you a fuel
gauge type of meter for your battery bank. It monitors the battery bank
and reports the percentage state of charge, real time amps, voltage,
amp-hours in/out, and the minimum/maximum DC volts. The Battery Monitor
Kit includes the sense module, sense and communication cables. This
ME-BMK-NS is identical to the ME-BMK except it does not include the
500A/mV shunt. However, this shunt is required to be installed in the
battery system for the Battery Monitor to work.
* The ME-BMK-NS requires a Magnum inverter with a "Network" port and a
ME-RC (revision 2.0 or higher) or ME-ARC remote control. |
Features |
-
Work with ME, MS,
MS-AE and RD Series Inverters
-
Kit includes:
Sense module, Twisted pair wire 5
length, 18 AWG wire and Communication cable 10 length, 2-conductor,
telephone standard
|
Specifications |
DC volts
|
7 to 70 (ฑ0.5%) auto voltage detection |
DC amps
|
ฑ0.1 to 999 (ฑ1.0%) |
Battery SOC % |
0 to 100% (1% increments) |
Power draw
|
< .6 watts |
Amp hours in/out |
ฑ32,768 amp hours (1 AH increments) |
rAH out (resettable amp hours removed)
|
0 to 65,353 amp hours, resettable (0.1 AH
increments) |
tAH out (total amp hours removed) |
0 to 65,535,000 amp hours (0.1 k or 100 AH
increments) |
Minimum/maximim DC
|
7 to 70 VDC, resettable |
Shipping weight |
2 lb (.9 kg) |
Kit includes
|
Manual, sense module, DC shunt, twisted
pair wire, and communication cable |
Sense wire |
Twisted pair blue & orange, 5 length, 18
AWG wire |
Communication cable
|
2-conductor, 10 twisted pair, telephone
standard |
Remote requirements
|
Use with an ME-RC with firmware revision
of 2.0 or higher |
A-20110803-1500-130-L
*This item is BRAND NEW -
not refurbished. It comes with all manufacturer supplied accessories, and full
manufacturer's USA warranty.
|