|
Magnum Energy MS4124PE MS-PE Series Pure Sine
Wave Inverter/Charger, Parallel Stacking, Power Factor Corrected PFC Charger,
18-34 VDC Input Battery Voltage Range, 230VAC Nominal AC Output Voltage, 50 Hz
Output Frequency, Less than 5% Total Harmonic Distortion THD, 65 amps AC 1 msec
surge current, 30 amps AC 100 msec surge current, 6300 real watts 5 sec surge
power, 5300 real watts 30 sec surge power, 4750 real watts 5 min surge power,
4600 real watts 30 min surge power, 4100 VA Continous power output at 25C, 273
ADC Max Continuous input Current, 90% peak Inverter Efficiency, Approx 20ms
Transfer Time, 9 watts Search Moad, 30 watts No Load; Charger outputs 105 ADC
continously at 25C, 88% peak Charger efficiency, Over .95 Power Factor, 14 AC
amps charger input current at rated output, 30 amps AC Transfer Relay
capability; Five Stage Charging Capability: Bulk, Absorb, Float, Equalize
(requires optional remote) and Battery Saver; 15 ft Battery Temp Compensation
with Battery Temp Sensor Standard; Internal Cooling 0 to 120 cfm variable speed
using dual 92mm brushless DC fans; Overcurrent protection with 2 overlapping
circuits; Overtemperature protection on Transformer, MOSFETS and battery;
Conformal coating on PCB's, Powder coated chassis & top and Stainless Steel
Fasteners for corrosion protection; CE Listed; -20C to +60C Operating Temp; -40C
to +70C Nonoperating Temp; 0 to 95% RH non condensing operating humidity; 13.75L
x 12.65W x 8H in; Shelf or Wall mounted; Unit Weight 55 lbs; Ship Weight 63 lbs;
Max operating altitude 15000 ft.
|
General Information |
|
Manufacturer |
Magnum Energy |
|
Manufacturer Part Number |
MS4124PE |
|
Product Name |
MS-PE Series Pure Sine Wave Inverter/Charger |
|
Overview |
Magnum Energy now offers two 230VAC/50Hz
pure sine wave inverter/charger options for renewable energy
applications. The MS-PE Series is powerful, easy-to-use, and best of
all, cost effective. Install the MS-PE Series in four easy steps: simply
connect the inverter’s output to your distribution circuits or
electrical panel, connect your utility power cable to the inverters
easy-to-reach terminal block, connect the batteries, and switch on the
power.
When the power requirements of the system are beyond the capacity of a
single MS-PE Series inverter or the system is expanded as more loads are
added, up to four MS-PE Series inverters can be connected together in a
parallel configuration. When connecting inverters in parallel, the
overall inverter power and surge capacity is increased to power a large
single load or more smaller loads.
Available in MS4124PE and MS4348P4E models, the MS-PE Series inverters
are powerful, easy-to-use and carry the CE certification for European
installations. |
|
Features |
- Parallel stacking: You can
parallel up to four inverter/chargers for up to 17.1kw of power at
230V. The Magnum Router is required for parallel stacking the MS-PE
Series.
- Power Factor Corrected (PFC)
Charger: Our PFC Charger is built into all of our inverter chargers.
It uses less energy from a generator than a standard charger - using
25-30% less AC current
than standard chargers.
- Safe and reliable: The MS-PE
Series is listed to the stringent requirements CE for renewable
energy installations.
- Pure sine wave: Power your T.V.s,
stereos, plasma screens, and other sensitive electronics without
worry. The pure sine wave inverter and power factor corrected
charger provide clean,
reliable inverter power with low total harmonic distortion (THD) of
less than 5%.
- Versatile mounting: Mount the
MS-PE Series on a shelf or wall.
- Lightweight: The lightweight
aluminum base and cover also provides noise reduction and corrosion
resistance.
- Multiple ports: The MS-PE Series
provides multiple ports, including an RS485 communication port for
network expansion, and a remote port.
- Accessible design: The extra large
AC access cover with terminal screw block and 360° DC connection
terminals with covers make this inverter more accessible when it
needs to be.
- Convenient switches: The MSPE
Series comes with an on/off inverter-mounted switch with an
easy-to-read LED indicator.
- Buy with ease: The MS-PE Series is
backed by a two-year (24-month) limited warranty.
|
|
Specifications |
|
Inverter
Specifications |
|
Input battery voltage range
|
18 - 34 VDC |
|
Nominal AC output voltage |
230 VAC ± 5% |
|
Output frequency and accuracy |
50 Hz ± 0.4 Hz |
|
Total Harmonic Distortion (THD) |
< 5% |
|
1 msec surge current (amps AC) |
65 |
|
100 msec surge current (amps AC) |
30 |
|
5 sec surge power (real watts) |
6300
|
|
30 sec surge power (real watts)
|
5300 |
|
5 min surge power (real watts) |
4750 |
|
30 min surge power (real watts) |
4600 |
|
Continuous power output at 25°C |
4100 VA |
|
Rated input battery current |
273 ADC
|
|
Inverter efficiency (peak) |
90% |
|
Transfer time
|
~ 20 ms |
|
Search mode
|
9 watts |
|
No load (230 VAC output, typical) |
30 watts |
|
Waveform |
Pure Sine Wave |
|
Charger Specifications |
|
Continuous output at 25°C |
105 ADC |
|
Charger efficiency |
88% |
|
Power factor
|
> 0.95 |
|
Input current at rated output (AC amps) |
14 |
|
General Features and Capabilities |
|
Transfer relay capability |
30 amps AC |
|
Five stage charging capability |
Bulk, Absorb, Float, Equalize (requires
remote), and Battery Saver™ |
|
Battery temperature compensation
|
Yes, 4.6 m (15’) Battery Temp Sensor
standard |
|
Internal cooling |
0 to 120 cfm variable speed drive using
dual 92mm brushless DC fans |
|
Overcurrent protection
|
Yes, with two overlapping circuits |
|
Overtemperature protection |
Yes on transformer, MOSFETS, and battery |
|
Conformal coating on PCB’s for corrosion
protection |
Yes |
|
Powder coated chassis & top for corrosion
protection |
Yes |
|
Stainless steel fasteners for corrosion
protection |
Yes |
|
Listings |
CE |
|
Environmental Specifications |
|
Operating temperature |
-20° C to +60° C (-4° F to 140° F) |
|
Nonoperating temperature
|
-40° C to +70° C (-40° F to 158° F) |
|
Operating humidity
|
0 to 95% RH non condensing |
|
Physical Specifications |
|
Dimensions (h x w x d) |
34.9 cm x 32.1 cm x 20.3 cm (13.75” x
12.65” x 8.0”) |
|
Mounting
|
Shelf (top or bottom up) or wall |
|
Weight |
25.0 kg (55 lb) |
|
Shipping Weight |
28.6 kg (63 lb) |
|
Max operating altitude |
4570 m (15,000’) |
A-20120831-1687-130-E
*This item is BRAND NEW -
not refurbished. It comes with all manufacturer supplied accessories, and full
manufacturer's USA warranty.
|
