|
General Information
|
| Manufacturer |
Mogami |
| Manufacturer Part Number |
W2930-500 |
| Product Name |
Snake Cable (Multicore Microphone Cable), 500', Black |
|
Overview
|
| Mogami multicore cables are designed for the highest level of audio performance and feature superb electrical and mechanical characteristics while remaining compact, superflexible and easy to use. |
|
Features
|
- Individually twisted shielded pairs, available in 2 to 48 channels
- XLPE (Cross Linked Polyethylene) insulation provides superb electrical characteristics and will not melt or shrink back during soldering
- Rugged and flexible construction that is easy to handle, even at temperatures down to -20°C (-4°F)
- Channel numbers are printed and underlined on each core jacket to ensure correct identification, regardless of which end is stripped
- Outer jackets of each pair are colour coded by standard resistor colour code, allowing quick identification of conductor pairs
- Inner conductors are also colour coded based on the international standard resistor colour code. Each pair is colour coded by jacket and conductor colour combination
- Each channel has a drain wire and served (spiral) bare copper shield. The drain wire simplify termination and can be crimped by the same size contact as the inner conductor pair
- CL2 rated version available. Conductor size of CL2 rated version is thicker #25AWG so that it is also recommended for rugged application and firm and easier crimp terminal connector wiring as well as NEC fire regulation requirement
|
|
Specifications
|
| No. Of Channels |
2-ch |
| Ov. Dia. (approx. Mm) |
7.5(0.295") |
| Jacket Thickness (approx. Mm) |
1.0(0.039") |
| Weight (kg/100m)(kg/328ft) |
7 |
| Maximum Length Available |
506m (1659Ft) |
| CABLE CORE |
| Conductor |
30/0.08A (0.15mm²) #26AWG (30×#40AWG) |
| Insulation |
1.0Ø XLPE (Cross Linked Polyethylene) (0.039") |
| Drain Wire |
7/0.18TA (0.18mm²) #25AWG (7×#33AWG) |
| Served Shield |
Approx. 58/0.10A Served (spiral) Shield |
| Jacket (covering) |
2.8Ø Flexible PVC (0.110") |
| DC Resistance at 20°C |
| Inner Pair Conductor |
0.13Ω/m(0.040Ω/Ft) |
| Shield |
0.031Ω/m(0.0095Ω/Ft) |
| Capacitance at 1kHz, 20°C (Partial Capacitance Value) |
| K0 |
130pF/m(40pF/Ft) |
| K1 |
12pF/m(3.7pF/Ft) |
| Inductance |
0.6µH/m(0.18µH/Ft) |
| Electrostatic Noise (hum Pick-up) |
2.5mV Max. |
| Electromagnetic Noise At 10khz (inductance Of The Toroidal Core: 595µh) |
0.1mV Max. |
| Microphonics (method: Stepping On Cable) |
50mV Max. at 50kΩ/ Load |
| Voltage Breakdown |
Must withstand at DC 500V/15sec. |
| Insulation Resistance At Dc 125v, 20°c |
100000 MΩ/ × m Minimum |
| Tensile Strength Of One Pair (26°c, 65% Rh) |
274N |
| Emigration |
Non-emigrant to ABS resin |
| Applicable Temperature |
-20°C‾ +70°C(-4°F‾ +158°F) |
| Standard |
UL13 CL2X 60°C / UL 20002 AWM 30V 60°C VW-1 |
