NTI Audio 600 000 200 Model DL1 Digilyzer
Digital Audio Analyzer, Blue Color; The Digilyzer analyzes and debugs
different parameters within digital audio signals at the same time;
Interface carrier parameters like level and sample frequency; Channel
Status parameters like professional/consumer mode; Audio related
parameters like audible content and level; UPC 844632055935; The event
logger tracks every change of the input signal; Audio Monitoring; Scope;
Integrity Check; THD+N, Level, Frequency; Frequency Sweep; vu/PPM;
Dimensions 6.4" x 3.38" x 1.63"; Weight 0.8 lbs
General Information
|
Manufacturer
|
NTI Audio
|
Manufacturer Part Number
|
600000200
|
Product Name
|
DL1 Digilyzer
Digital Audio Analyzer, Blue Color |
UPC Code |
844632055935
|
Overview
|
The Digilyzer DL1 is a
powerful digital audio analyzer. Testing, monitoring and
troubleshooting digital audio interfaces is straight-forward using
this compact tool. The digital audio formats AES3, S/PDIF, TOSLINK
and ADAT with sampling frequencies up to 96 kHz are supported
The built in integrity check alerts if protocol inconsistencies,
which could cause serious troubles, are detected. Digital audio
becomes transparent and easy to debug with the integrated speaker,
event logging and the audio lens. The Digilyzer shows all these
important parameters at one glance
|
Features
|
- Blue Color
- The Digilyzer analyzes and
debugs different parameters within digital audio signals at
the same time
- Interface carrier parameters
like level and sample frequency
- Channel Status parameters like
professional/consumer mode
- Audio related parameters like
audible content and level
- The event logger tracks every
change of the input signal
- Audio Monitoring
- Scope
- Integrity Check
- THD+N, Level, Frequency
- Frequency Sweep
- vu/PPM
|
Pictures
|
|
Specifications
|
Enclosure
Color |
Blue
|
Frame
|
Consumer
/ Professional, up to 24 bit, Sampling frequency fs
= 32 – 96 kHz
Also supports: Interleaved 96 kHz mode on all inputs (single
channel double sampling frequency modes)
|
Measurements
specifications
|
Signal
Level-FS, level-RMS, signal frequency, THD+N, event
logger, frequency sweep, PPM, scope, overload detection,
Full-Scale detection
Carrier
Sampling frequency (accuracy ±2.5 ppm), carrier level
Frame
Channel status according to AES 3 (ed. 2003) and IEC 60958-3
(ed. 2003), bit statistics
|
Event
logger
|
Recording
resolution: selectable 1”, 10”, 1’, 10’, 1h
Recording duration: selectable 8’, 83’, 8h, 83h, 20days
Display At: 1”, 10”, 1’, 10’, 1h, 10h, 24h, all
Recording intervals: max. 500
Single errors in one recording interval: 10 - 36 000
|
Input
connectors
|
AES 3
(110 Ohm) XLR, S/PDIF (RCA), TOS-Link, ADAT
AES 3id (75 Ohm) using Chinch-BNC adapter, phantom power resistant
|
General specifications
|
THD+N (Total Harmonic Distortion + Noise)
Bandwidth: 10 Hz to 20 kHz
Resolution 3 digits (dB-scale) or 4 digits (Percent-scale)
Residual balanced Less than -85 dB at -10 dBu to +20 dBu
HD+N unbalanced Less than -74 dB at 0 dBu to +14 dBu
PC Interface
Internal device memory for up to 580 records
USB interface to MiniLINK PC software
Online data logging from Acoustilyzer directly to PC
|
Monitor
|
Built-in
speaker, headphone connector
|
Display
|
Backlit
graphic LCD
|
Power
|
3x AA
size dry batteries (alkaline) (not included)
Typical lifetime: 8 hours
External DC power, 7.5 VDC, 500 mA, stabilized, use NTi Audio
recommended parts only
|
Environmental |
Temperature
32 F to 113 F
Humidity Less than 90 Percent R.H., non condensing
|
Dimensions
|
6.4" x 3.38" x 1.63"
|
Weight
|
0.8 lbs |
A-20170530-1505-199-L
*This item is BRAND
NEW - not refurbished. It comes with all manufacturer supplied
accessories, and full manufacturer's USA warranty.
|