Panasonic PT-D5700UL XGA DLP Projector with
BriteOptic Dual-Lamp Technology, 6000 ANSI Lumens, Resolution 1024x768, Contrast
ratio 2,000:1 (full on/full off, contrast mode: high), 28.9 lbs (13.1 kg), No
Lens, Alternative to PT-D5600UL PTD5600UL, Pixels 786,432 (1,024 x 768) x 1
total of 786,432 pixels, Lamp 300 W UHM lamp x 2 (Dual Lamp System), Multiple
terminals, Screen size 50 - 600 inches, Installation Front/rear, ceiling/floor
DLP Technology
General Information |
Manufacturer |
Panasonic |
Manufacturer Part Number |
PT-D5700UL |
Product Name |
XGA DLP Projector with BriteOptic™ Dual-Lamp
Technology, 6000 ANSI Lumens |
Marketing Information |
The PT-DW5700UL projector offers a full
6,000 lumens of brightness and WXGA wide-screen projection. A
newly-developed AC lamp and a more efficient reflector and synthetic
mirror produce crisp, sharp images even when projecting images with a
wide aspect ratio in ordinary daytime lighting. Newly developed AC lamps
with full 300 watts of power offer excellent brightness and greater
reliability than other types. A new lamp drive system also lowers the
stress on the lamp electrodes while the lamps are lit. The new lamps
have an approximate lifetime of 3,000 hours (in low mode), which is
reassuring for applications where the projector is frequently used. The
AC lamps also minimize color irregularities. The system daylight view
function uses an image processing circuit to compensate for the loss of
color saturation that occurs when light reflects onto the screen from
bright surroundings. It is especially effective for producing crisp,
sharp images in dark portions containing gradation. The function can be
adjusted in three steps. The PT-DW5700UL delivers the same performance
as the PT-DW5700U, but comes without a lens. Combine it with an optional
lens to get the exact performance you need according to usage and
operating conditions. |
Features |
- Vivid color control
A unique control technology is used to maximize the color segment
areas of the color wheel. Compared to conventional projectors, the
brightness of each color is increased by an average of about 15%.
This results in sharper, clearer color reproduction.
- Progressive cinema scan (3/2
Pulldown)
This interlace/progressive conversion technology automatically
detects when the input signal is derived from filmed material and
selects the optimum progressive processing method to assure faithful
reproduction of the original image.
- Full 10-bit picture processing
The use of a full 10-bit image processing system provides smooth
tonal expression. For example, skin tones appear natural and true to
life
- 3D color management system
Compensation provides optimal levels of color saturation, hue, and
brightness that were not possible with conventional projectors.
Colors approach those of the original image, even on large screen
displays.
- New IP conversion circuit
The PT-D5700U/D5700UL feature a new IP conversion circuit that
produces more detailed images than our previous models.
- Dynamic sharpness control
The dynamic sharpness control circuit adjusts the video signal
waveforms based on the difference in brightness of adjacent pixels
for
a sharp, clear picture that is relatively unaffected by signal
noise.
- More effective noise reduction
Images are noticeably clearer, thanks to higher-performance frame
noise reduction, which lowers image graininess, and improved MPEG
noise reduction, which suppresses the block noise and mosquito noise
that are common in fast-action scenes.
- Optional lenses for various venues
Five optional lenses with different throw distances are available in
addition to the supplied lens. These powered zoom/focus lenses
enable the projectors to perform superbly in an array of projection
environments.
- Multiple terminals
The PT-D5700U/D5700UL has an array of terminals-two RGB inputs
including a 5-BNC connector, serial in/out, one S-video inputs, two
remote in, one remote out, DVI-D and control capability-to support a
broad range of projection needs HDCP. (High-Bandwidth Digital
Content Protection) compliant. Using the serial terminal(RS232C),it
is also possible to connect and operate AMX and Crestron control
systems with ease.
|
Specifications |
System |
DLP® Projection system |
Device |
0.7" (diagonal) DLP® chip 4:3 |
Pixels |
786,432 (1,024 x 768) x 1 total of 786,432
pixels |
Lamp |
300 W UHM™ lamp x 2 (Dual Lamp System) |
Brightness (normal lamp) |
6,000 lumens (dual lamp, high power mode) |
Contrast ratio |
2,000:1 (full on/full off, contrast mode:
high) |
Resolution |
RGB 1,024 x 768 pixels
Video 560 TV lines |
Lens |
Optional powered zoom/focus lenses |
Screen size |
50 - 600 inches |
Lens shift |
Vertical (powered), horizontal (manual) |
RGB input scanning frequency |
fH 15-91 kHz, fV 50-85 Hz
Dot clock 150 MHz or lower |
Component signal |
480i, 480p, 576i, 576p, 720/60p, 720/50p,
1080/60i, 1080/60p 1080/50i, 1080/50p |
Video signal |
NTSC, NTSC4.43, PAL, PAL60, PAL-N, PAL-M,
SECAM |
Terminals |
VIDEO IN BNC
S-VIDEO IN Mini DIN 4-pin
RGB1/YPBPR IN BNC x 5
RGB2 IN D-sub HD 15-pin
DVI-D IN 24pin DVI 1.0 compliant, HDCP compatible, for single link
RS-232C IN D-sub 9-pin female
RS-232C OUT D-sub 9-pin male
REMOTE 1 IN M3 jack
REMOTE 1 OUT M3 jack
REMOTE 2 IN D-sub 9-pin female (parallel)
LAN RJ-45x1, compliant with PJLink™ (class 1), 10Base-T/100Base-TX |
Keystone correction range |
±30° (with standard lens) |
Installation |
Front/rear, ceiling/floor |
Power cord length |
9.9' (3.0m) |
Power supply |
120 V AC, 60 Hz |
Power consumption |
770 W (770 VA) (10 W during standby mode
with fan stopped) |
Dimensions (W x H x D) |
20-7/8' x 6-9/16' x 16-7/8' (530 x 167 x
429 mm) |
Weight |
28.9 lbs (13.1 kg)
|
Operating temperature |
32 -113 °F (0 -45 °C) |
Operating humidity |
20-80% (no condensation) |
Supplied accessories |
Power cord, Wireless/wired remote control
unit, AA Batteries (x 2) for remote control |
A-20070910-1354-130-E
*This item is BRAND NEW -
not refurbished. It comes with all manufacturer supplied accessories, and full
manufacturer's USA warranty.
|