|
Pelco CM6700-MXB2 Microprocessor-Based
Switcher/controller, 16 Inputs, 2 Outputs, NTSC, 120V, 50/60Hz, 20-Character
Camera Title, Time (24-Hour or AM/PM Formats); Date (4 Formats), Alarm Display
Call-up from 18 Direct-Connect Alarm Inputs, Video Inputs Individually
Selectable for Terminating or Looping, Coaxitron Compatible, Individual Monitor
Sequential Switching with Preset Call, Compatible with RS-422 Pelco D or Pelco P
Protocol, Camera Control Selection: Coaxitron or RS-422; Individually Selectable
per Camera, Control Genex Multiplexers, Selectable Data Port:
RS-232/RS-422/RS-485, Password-Protected Menu Configuration, User Partitioning
to Prevent Unauthorized Viewing
|
General Information |
|
Manufacturer |
Pelco |
|
Manufacturer Part Number |
CM6700-MXB2 |
|
Product Name |
Microprocessor-Based Switcher/controller, 16
Inputs, 2 Outputs, NTSC, 120V, 50/60Hz |
|
Marketing Information |
The CM6700 Matrix switcher/controller is a
very affordable, highly versatile, full-featured cross-point matrix
switcher. The CM6700 provides switching and control for 16 video inputs
and up to 4
monitor outputs from any one of up to 8 keyboards.
The CM6700 Matrix switching unit is designed to be remotely operated
from desktop keyboards or external computer systems.
The versatile mounting system allows for a variety of installation
options: either in a 19-inch rack (front or rear mount), wall, or shelf
mount. This versatility allows the bulk of the video cables to be
routed to a convenient area such as a telephone room instead of the
operator location.
Straightforward on-screen menus make configuring the CM6700 simple and
easy. (The CM6700 even lets you switch to Spanish-language configuration
menus.) The user-enabled character display shows time and date,
operation mode, camera number, and a 20-character title for quick, easy
identification of the on-screen video. The display characters are white
with black outline for viewing under varying lighting conditions. The
display can be located anywhere on the viewing monitor and can be turned
on or off.
The CM6700 supports two system macros, or salvo sequences, to allow
quick call-up of up to four cameras to four monitors simultaneously.
Salvo sequences include preset call of suitably equipped (PTZ or dome)
receivers.
When an alarm is received, the CM6700 will switch the camera for that
alarm to the selected monitors. If a PTZ function is being performed
when an alarm is received, an alarm-pending message
will appear. An alarm will automatically call a preset and preposition a
camera with suitable (PTZ or dome) receivers. Alarms are cleared either
by keyboard acknowledgment or timeout after contact
deactivation. Two extra alarm inputs allow for alarm-activated salvo
sequence call-up. A Form C alarm relay output allows for automatic
activation of an alarm event recorder or other device. In addition, this
relay is manually controllable from the system keyboard. |
|
Features |
- 16 Video Inputs; 2 Video Outputs
- 20-Character Camera Title
- Time (24-Hour or AM/PM Formats);
Date (4 Formats)
- Alarm Display Call-up from 18
Direct-Connect Alarm Inputs
- Video Inputs Individually
Selectable for Terminating or Looping
- Coaxitron® Compatible
- Individual Monitor Sequential
Switching with Preset Call
- Compatible with RS-422 Pelco D or
Pelco P Protocol
- Camera Control Selection:
Coaxitron® or RS-422; Individually Selectable per Camera
- Control Genex® Multiplexers
- Selectable Data Port:
RS-232/RS-422/RS-485
- Password-Protected Menu
Configuration
- User Partitioning to Prevent
Unauthorized Viewing
- Compatible Keyboards:
- Switcher Only (KBD100)
- Switcher Plus Multi-Speed Control,
Presets, Patterns, Receiver Auxiliary (KBD200A)
- Switcher Plus 3-Axis Joystick for
Variable Speed PTZ Control, Presets, Patterns, Receiver Auxiliary
(KBD300A)
- Optional CM6700-VMC Two-Monitor
Expansion Card
- Includes Spanish-Language Menus
|
|
Specifications |
|
GENERAL |
|
Memory Protection |
Replaceable lithium battery provides data
protection for ten years |
|
Keyboard Capacity |
8 |
|
Receiver/Dome Control |
Coaxitron® and RS-422 |
|
Alarm Inputs |
18, configurable (includes presets and
N.O./N.C. device) |
|
Alarm Relay Outputs |
1, DPST |
|
Rating |
0.5 A at 125 VAC |
|
General Purpose Outputs |
2, open collector; 32 VDC max., 25 mA max. |
|
Data Ports |
2
Receiver RS-422, Pelco D protocol 2400 baud, Pelco P protocol 2400 to
9600 baud
Data (Computer) RS-232/RS-422/RS-485, 1200 to 19.2K baud |
|
Keyboard Ports |
2
Local Port Provides data and 12 VAC power for one keyboard
Remote Port Data only port for all additional or remote keyboards; each
keyboard connected to this port requires a KBDKIT |
|
Dimensions (switcher only)
|
10.5" D x 17.0" W x 3.5" H (26.67 x 43.18
x 8.89 x cm) |
|
Mounting (switcher only)
|
Factory configured for EIA rack mount (2
RUs); rack ears can be removed for wall mount or freestanding
applications |
|
Weight Unit
|
9.46 lb (4.28 kg) |
|
ELECTRICAL |
|
Power Source |
120 V, 50/60 Hz |
|
Power Consumption
|
10 W |
|
SWITCHER CHARACTERISTICS |
|
Video Inputs
|
16 inputs, BNC, terminating or looping
(jumper selectable)
0.5 to 2.0 Vp-p composite video |
|
Video Outputs |
2 outputs, BNC |
|
Switching Type |
Cross-point video matrix, RS-170, NTSC,
CCIR and PAL compatible |
|
Switching Method
|
Vertical interval switching |
|
Switching Time |
Less than 16 milliseconds (typical) |
|
VIDEO |
|
Bandwidth
|
15 MHz |
|
Frequency Response |
Flat to 8 MHz, ±1dB to 15 MHz |
|
Signal-to-Noise Ratio |
–60 dB (peak-to-peak vs. RMS noise) |
|
Adjacent Channel Crosstalk |
–49.6 dB at 3.58 MHz |
|
Differential Gain |
1.03% |
|
Differential Phase |
1.02° |
|
Line Tilt |
0.6% |
|
Field Tilt |
1.2% |
|
Gain |
Unity (±1dB) |
|
DC Output |
Zero volts |
|
Video Cable Distances |
Minimum cable requirements:
• 75-ohms impedance
• All-copper center conductor
• All-copper braided shield with 95% braid coverage |
M-20110718-1300-130-E
*This item is BRAND NEW -
not refurbished. It comes with all manufacturer supplied accessories, and full
manufacturer's USA warranty.
|
