General
Information
|
Manufacturer
|
Pelco
|
Manufacturer
Part Number
|
DSSRV030US
|
Product Name
|
Digital Sentry Network Video Recorder
|
UPC Code
|
700880292983
|
Overview
|
The
new Pelco DSSRV030US Digital Sentry network video recorder (NVR) is
optimized to deliver the essential hardware support for the DS NVs
video management software (VMS) without the extra cost or risk of
integrating hardware and software. Boosted by the 2nd Generation Intel
Core i7 processor and 8 GB of RAM, Digital Sentry NVR provides an
optimal combination of processing power and reliability to meet the
demands of HD video recording and playback operations. The system is
powered to support up to 128 combined IP and analog video streams, with
up to 64 analog cameras supported via the optional ENC5416
direct-attached encoder. Analog streams are also supported using Pelco
and third-party encoders. |
Features
|
- 280
Mbps to support IP and analog video
- Supports
up to 128 IP Camera Streams; up to 64 Analog Cameras
- Records
H.264, MJPEG, and MPEG-4 IP Streams
- Supports
Pelco and Third-Party IP Cameras and Network Encoders
- Expandable
by Networking an Unlimited Number of Servers and Encoders (Dependent on
Available Network Bandwidth)
- Compatible
with DS ControlPoint for Simultaneous Monitoring of All DS Series and
DX Series Products in a Single Client Interface
- Network
Health and Event Monitoring
Support Through Simple Network Management Protocol (SNMP) and New
Digital Sentry System Information (DSSI) Utility
- Optimized
to Support Pre-Installed DS NVs Software
|
Specifications
|
System |
Processor
|
2nd Generation Intel®
Core™ i7 |
Operating System
|
Windows 7 Ultimate 64-bit SP1 |
Internal Memory |
8 GB RAM |
User Interface |
DS ControlPoint |
Internal Storage
|
3 TB |
RAID Level |
Internal RAID 5 (requires
DSSRV-RAID controller card for hot-swappable drives) |
External Storage
|
Pelco’s DX8100HDDI or third-party
SCSI targets (requires optional DSSRV-SCSI) |
System Drives |
6, 3.5-inch hard drive bays |
Optical Drive |
DVD±RW with
DSSRV-DVD |
Remote Client PC Requirements |
Operating System
|
Microsoft®
Windows® XP Professional SP2, Windows Vista® (32 or 64
bit), Windows 7 (32 or 64 bit) |
Processor |
2nd Generation Intel®
Core™ i7 3.4 GHz or higher |
Memory |
4 GB DDR3 or higher |
Graphics Card |
512MB or more dedicated memory |
Network |
Interface
|
2 Gigabit Ethernet RJ-45
(1000Base-T,non load balancing) |
Auxiliary USB Ports
|
1 front (USB 2.0), 4 rear (2
USB 3.0; 2 USB 2.0)
|
Power |
Power Input
|
100 to 240 VAC, 50/60 Hz,
autoranging |
Power Supply |
Internal |
Connections |
Video Out |
2 DVI-D connectors, 1 VGA
connector. A maximum of 2 video out connectors can be used. |
Audio Out |
1, 1/8-inch audio jack
connector |
Front Panel
Indicators/Functions |
Buttons
|
Power |
Indicators
|
Unit Status: Green, amber,
red; Primary
Network: Green, amber, red; Secondary Network: Green, amber, red;
Software Status: Green, amber, red (based on diagnostics); Hard Disk
Status: Green, red, off (behind bezel) |
Physical |
Dimensions
|
50.8 x 43.4 x 8.9 cm (20" D x
17.1" W x 3.5" H) |
Weight |
11.8 kg (26 lb) |
Supplied Accesories |
Power Cord |
1 USA standard, 1 based on
country designation; all cables are 3 prong, molded connector, 1.8 m (6
ft)
|
USB Keyboard and
Mouse |
1 |
Bezel Key |
2 |
Rack Mount Kit |
Brackets, rails, and hardware
for mounting in a 2 RU rack |
DSSRV-LIT
|
Documentation, resource and
recovery |
USB-DS |
For non-DVD models; the USB
stick is imaged with DS NVs and includes resource documentation |
Optional Accesories |
DS-SW-CAM
|
2nd Generation Intel®
Core™ i7 |
ENC5416 |
Direct-attached analog encoder |
ENC5400-4PORT |
4-port host card (analog)
connects 4 ENC5416 |
DSSRV-RAID |
LSI 3Ware 9750-8i RAID
controller card |
DSSRV-SCSI
|
Adaptec SCSI Card 29320LPE |
DSSHD-005 |
500 GB upgrade/replacement
drive |
DSSHD-030
|
3 TB upgrade/replacement drive |