General
Information
|
Manufacturer
|
Pelco
|
Manufacturer
Part Number
|
EH16
|
Product Name
|
Indoor/Outdoor Camera Enclosure
|
Overview
|
The EH16 Series is an
indoor/outdoor, highly reliable camera enclosure with a compact body
designed for easy installation. Constructed from die-cast aluminum, the
EH16 Series enclosure is designed to operate in a wide range of environments and to protect
electronic components in temperatures from –30° to
60°C (–22° to 140°F). The EH16 Series
enclosure is designed for use with analog and IP cameras that have both
fixed and variable focal length lenses (with or without auto iris
operation). The tethered, detachable lid provides easy access to the
innovative camera sled. Two adjustable glands (PG9 and PG11) on the
bottom of the enclosure allow for easy installation of the power and video cables. |
Features
|
- High
Reliability Die-Cast Construction
- Temperature
Range from –30° to 60°C
(–22° to 140°F)
- Meets
IP66 and NEMA Type 4X Standards
- IK10
Mechanical Impact Resistance
- Cable
Entry Glands and Mounting Holes on Bottom of Enclosure
- Designed
for Indoor/Outdoor Applications
- Easy
Access for Servicing and Installation
|
Specifications
|
General |
Construction |
Die-cast aluminium |
Finish |
Alodine with gray polyester
powder coat |
Environment |
Indoor/Outdoor ambient
temperature -30° to 60°C (-22° to
140°F) |
Unit Length
|
Base 33.99 cm (13.38 in)
Overall 36.55 cm (14.39 in) |
Weight |
1.13 kg (2.50
lb) |
EM16 Wall Mount (Optional) |
Construction: Aluminum
Finish: Alodine with gray polyester powder coat
Weight: Unit 0.29 kg (0.63 lb); Shipping 0.91 kg (2.00 lb)
|
Mechanical |
Camera and Lens Size |
Accepts camera and lens
combinations (including BNC connector) up to 22.86 x 7.92 x 7.62 cm
(9.00" L x 3.12" W x 3.00" H) |
Viewing
Window |
0.3 cm (0.118-inch) thick,
high optic grade, scratch-resistant Lexan™ |
Viewing Area |
7.14 x 6.27 cm (2.81" W x
2.47" H) |
Camera Mounting |
Single slot for adjustable
camera positioning on snap-in camera sled
|
Cable Entry
|
1 x PG9 and 1 x PG11
compression glands on bottom |
Maximum Cable Diameters
|
PG9 0.80 cm (0.312 in.)
PG11 1.00 cm (0.395 in.) |
Cable Entry Holes
|
1.00 x 1.91 cm (0.750 in.)
diameter and 1.00 x 1.60 cm (0.630 in.) diameter; 1.91 cm (0.750-inch)
hole will accept 1/2-inch NPT conduit fitting when enlarged to 2.22 cm
(0.875 inches); 1.60 cm (0.630-inch) hole will accept 1/4-inch NPT
conduit fitting |
Lid Fastening |
3 Torx-head T30
screws
|
Electrical |
Input Power
|
24 VAC, 230 VAC |
Input Voltage
|
24 VAC: ±10% VAC
230 VAC: ±10% VAC |
Optional Accesories |
Sun Shroud
|
SS16 Indoor/outdoor, aluminum
construction |
Power Supplies
|
Indoor/Outdoor 24 VAC :
WCS1-4 Outdoor, 1 output, 4 A (100 VA) capacity
WCS4-20B Outdoor, 4 outputs, 20 A (480 VA) capacity
MCS4-2B Indoor, 4 outputs, 2 A (48 VA) capacity
MCS8-5B Indoor, 8 outputs, 5 A (120 VA) capacity
MCS16-10 Indoor, 16 outputs, 10 A (240 VA) capacity
MCS16-10SB Same as above except with circuit breakers
MCS16-20 Indoor, 16 outputs, 20 A (480 VA) capacity
MCS16-20SB Same as above except with circuit breakers
Indoor PoE:
POE21U1AF-US, -EU High-power, single-port, IEEE802.3af injector
POE1AT-US, -EU Single-port, IEEE802.3at midspan
POE4ATN-US, -EU 4-port, IEEE802.3at midspan
POE8ATN-US, -EU 8-port, IEEE802.3at midspan
POE16ATN-US, -EU 16-port, IEEE802.3at
midspan |
Optional Mounts |
Wall |
EM16: Wall mount with
feedthrough for EH16 (tilt angle of +20° to
–70°); withstands wind velocities up to 145 km/h (90
mph)
EM1450: Light duty wall mount, maximum load 9.07 kg (20 lb)
EM2400: Medium duty wall mount; maximum load 18.14 kg (40 lb) with
feedthrough (tilt angle of ±90°)
EM22: Medium duty wall mount; maximum load 18.14 kg (40 lb) |
Pedestal
|
EM1009U, EM1015U, MM22 Medium
duty pedestal mount, maximum load
18.14 kg (40 lb) |
Pipe/Pole |
EM1109, EM2000, EM2200 Medium
duty mounts for pipe/pole
applications; maximum load 18.14 kg (40 lb); fit poles with 7.62 cm (3
in.) to 20.32 cm (8 in.) diameter |