Pelco FS85011ASST Single-Channel Digitally
Encoded Video Fiber Transmitter, Designed for Use in Spectra III and Spectra IV
Domes and in the ExSite Explosionproof Positioning System, 8-Bit Digitally
Encoded Video for High-Quality Video Transmission over a Single Fiber,
Bidirectional RS-422 Data Channel or Coaxitron Communication, Single-Mode Fiber
Support for Distances up to 46 km, Patent-Pending Transmission Technology
Allowing Coaxitron Control at Full-Distance Capabilities, Compatible with the
FR85011A/FR85011 Fiber Receiver, Integrated Wavelength Division Multiplexing
(WDM) in a Single Fiber, Laser Diode for Transmission of Optical Signals,
Exceeds All Requirements for the RS-250C Medium-Haul Transmission Specification
General Information |
Manufacturer |
Pelco |
Manufacturer Part Number |
FS85011ASST |
Product Name |
Single-Channel Digitally Encoded Video Fiber
Transmitter |
Marketing Information |
The FS85011A fiber transmitter is designed
for quick and easy installation into the back box of Spectra III™ and
Spectra® IV domes or can be included as part of an ExSite®
explosionproof positioning system at the factory. The FS85011A
transmitter provides the ability to send one unidirectional composite
video channel and one bidirectional RS-422 data channel over one optical
fiber. In addition, patentpending technology provides the solution for
allowing Coaxitron® pan/tilt/zoom (PTZ) control data to be transmitted
the full distance of the fiber. Available in multimode and single-mode
versions, the FS85011A transmitter is compatible with the
FR85011A/FR85011 receiver.
A jumper on the FS85011A transmitter provides the unique capability to
select RS-422 or Coaxitron data communication. The selection of RS-422
data communication allows PTZ control of the Spectra III/Spectra IV dome
or of the ExSite positioning system. With Coaxitron control, PTZ control
signals are transmitted over video coaxial cable from the controller to
the FR85011A/FR85011 receiver. The receiver then transmits the Coaxitron
data onto the fiber to the FS85011A transmitter. The Coaxitron data is
transmitted from the controller to the Spectra III/Spectra IV dome or to
the ExSite positioning system during the vertical blanking interval of
the video signal.
The FS85011A transmitter operates using power supplied from the Spectra
III/Spectra IV dome or from the ExSite positioning system. |
Features |
- Designed for Use in Spectra III™
and Spectra® IV Domes and in the ExSite® Explosionproof Positioning
System
- 8-Bit Digitally Encoded Video for
High-Quality Video Transmission over a Single Fiber
- Bidirectional RS-422 Data Channel
or Coaxitron® Communication
- Patent-Pending Transmission
Technology Allowing Coaxitron Control at Full-Distance Capabilities
- Compatible with the
FR85011A/FR85011 Fiber Receiver
- Integrated Wavelength Division
Multiplexing (WDM) in a Single Fiber
- Single-Mode Fiber Support for
Distances up to 46 km
- Laser Diode for Transmission of
Optical Signals
- Exceeds All Requirements for the
RS-250C Medium-Haul Transmission Specification
- Compatible with NTSC, PAL, and
SECAM Video Standards
- No Performance Adjustments
Required
- LED Indicator for Monitoring of
Signal Status
|
Specifications |
Fiber Optic Connector Type |
ST |
Wavelength (Video/Data) |
1310/1550 nm |
Optical Power Budget |
28 dB |
Maximum Transmission Distance |
46 km (28.6 mi) |
Cable Length |
6 inches (15.24 cm) |
Operating Temperature |
Refer to the Spectra III, Spectra IV, or
ExSite product specification sheet as appropriate. |
Input Power Requirements |
12 VDC, 160 mA |
LED Indicator |
Optic Fault |
Dimensions |
2.9" L x 2.0" W (7.37 x 5.08 cm) |
Unit Weight |
0.08 lb (0.04 kg) |
Certifications |
CE, Class A
FCC, Class A
UL/cUL Listed
C-Tick
Complies with FDA requirements for Class 1 laser products |
M-20100510-1300-130-E
*This item is BRAND NEW -
not refurbished. It comes with all manufacturer supplied accessories, and full
manufacturer's USA warranty.
|