|
|
|
Pelco FS85011ASSTEX Single-Channel Digitally
Encoded Video Fiber Transmiter, Single-Mode (9/125 ìm), Designed for Use in
Spectra III and Spectra IV Domes and in the ExSite Explosionproof Positioning
System, 8-Bit Digitally Encoded Video for High-Quality Video Transmission over a
Single Fiber, Support for Distances up to 46 km, Bidirectional RS-422 Data
Channel or Coaxitron Communication, Patent-Pending Transmission Technology
Allowing Coaxitron Control at Full-Distance Capabilities, Compatible with the
FR85011ASSTR/FR85011SSTR Fiber Receiver, Integrated Wavelength Division
Multiplexing (WDM) in a Single Fiber, Laser Diode for Transmission of Optical
Signals, Compatible with NTSC, PAL, and SECAM Video Standards
|
General Information |
|
Manufacturer |
Pelco |
|
Manufacturer Part Number |
FS85011ASSTEX |
|
Product Name |
Single-Channel Digitally Encoded Video
Fiber Transmiter |
|
Marketing Information |
The FS85011A fiber transmitter is designed
for quick and easy installation into the back box of Spectra III™ and
Spectra® IV domes or can be included as part of an ExSite®
explosionproof positioning system at the factory. The FS85011A
transmitter provides the ability to send one unidirectional composite
video channel and one bidirectional RS-422 data channel over one optical
fiber. In addition, patentpending technology provides the solution for
allowing Coaxitron® pan/tilt/zoom (PTZ) control data to be transmitted
the full distance of the fiber. Available in multimode and single-mode
versions, the FS85011A transmitter is compatible with the
FR85011A/FR85011 receiver.
A jumper on the FS85011A transmitter provides the unique capability to
select RS-422 or Coaxitron data communication. The selection of RS-422
data communication allows PTZ control of the Spectra III/Spectra IV dome
or of the ExSite positioning system. With Coaxitron control, PTZ control
signals are transmitted over video coaxial cable from the controller to
the FR85011A/FR85011 receiver. The receiver then transmits the Coaxitron
data onto the fiber to the FS85011A transmitter. The Coaxitron data is
transmitted from the controller to the Spectra III/Spectra IV dome or to
the ExSite positioning system during the vertical blanking interval of
the video signal.
The FS85011A transmitter operates using power supplied from the Spectra
III/Spectra IV dome or from the ExSite positioning system. |
|
Features |
- Single-Mode (9/125 ìm)
- Designed for Use in Spectra III™
and Spectra® IV Domes and in the ExSite® Explosionproof Positioning
System
- 8-Bit Digitally Encoded Video for
High-Quality Video Transmission over a Single Fiber
- Bidirectional RS-422 Data Channel
or Coaxitron® Communication
- Patent-Pending Transmission
Technology Allowing Coaxitron Control at Full-Distance Capabilities
- Compatible with the
FR85011ASSTR/FR85011SSTR Fiber Receiver
- Integrated Wavelength Division
Multiplexing (WDM) in a Single Fiber
- Support for Distances up to 46 km
- Laser Diode for Transmission of
Optical Signals
- Exceeds All Requirements for the
RS-250C Medium-Haul Transmission Specification
- Compatible with NTSC, PAL, and
SECAM Video Standards
- No Performance Adjustments
Required
- LED Indicator for Monitoring of
Signal Status
- 6 ft (1.83 m) Cable Length
|
|
Specifications |
|
VIDEO |
|
Number of Channels
|
1 |
|
Modulation Type
|
Pulse code modulation, 8-bit resolution |
|
Video Input
|
1.0 Vp-p, 75 ohms; NTSC, PAL, and SECAM |
|
Bandwidth
|
6.5 MHz |
|
Gain
|
Unity |
|
Differential Gain |
<2% |
|
Differential Phase |
<1° |
|
Tilt |
<1% |
|
Signal-to-Noise Ratio |
>60 dB (CCIR weighted) |
|
DATA |
|
Number of Channels |
1 |
|
Data Communication |
RS-422, Coaxitron |
|
GENERAL |
|
Operating Temperature
|
Refer to the Spectra III, Spectra IV, or
ExSite product specification sheet as appropriate. |
|
Input Power Requirements |
12 VDC, 160 mA |
|
LED Indicator
|
Optic Fault |
|
Dimensions |
2.9" L x 2.0" W (7.37 x 5.08 cm) |
|
Unit Weight |
0.08 lb (0.04 kg) |
|
MECHANICAL |
|
Connectors |
Video/Data/Power 16-pin header
Data Selection 2-pin header
Fiber Optic ST for multimode fiber
ST or FC for single-mode fiber |
M-20110718-1300-130-E
*This item is BRAND NEW -
not refurbished. It comes with all manufacturer supplied accessories, and full
manufacturer's USA warranty.
|
