|
Pelco IEE20DN8-1 IEE Series Sarix Environmental
Network Dome Camera, Extended Platform, 2.1 MPx, Day/Night, 2.8 ~ 8 mm Varifocal
Megapixel Lens, Clear Dome, with Built-in Pelco Analytics, Embedded Installation Handles,
Up to 30 Images per Second (ips) at 1080P HD, Auto Back Focus for High Precision
Focusing, H.264, and MJPEG Compression, Sensitivity Down to 0.03 lux, Focus
Button with Delay Enables Precision Focus Through Bubble, Up to 2 Simultaneous
Video Streams, Web Viewing, up to 16 Cameras Simultaneously, Local Storage
(Micro SD) for Alarm Capture, Motion Detection, Bi-directional Full-Duplex
Audio, Open IP Standards, Vandal Proof, Camera Sabotage behavior detection
|
General Information |
|
Manufacturer |
Pelco |
|
Manufacturer Part Number |
IEE20DN8-1 |
|
Product Name |
IEE Series Sarix Environmental Network Dome
Camera, Extended Platform, 2.1 MPx, Day/Night, 2.8 ~ 8 mm Varifocal Megapixel
Lens, Clear Dome, with Built-in Pelco Analytics |
|
Marketing Information |
|
The Pelco IEE20DN8-1 H.264 2.1 Megapixel
Sarix Outdoor Day/Night Dome IP Security Camera with SarixTM technology
is a 2.1 Megapixel network indoor/outdoor rugged fixed dome camera
designed with industry-leading image quality and high performance
processing power. Its sturdy metal design is vandal and tamper resistant
and is designed for worry-free use in a wide range of environmental
operating conditions. In addition the Pelco IEE20DN8-1 boasts Auto Back
Focus, Advanced Lowlight, color accuracy, and sophisticated processing
power. Sarix technology defines the next generation of video security
imaging performance, delivering high definition (HD) resolution,
advanced low-light capabilities, consistent color science, and fast
processing power. The H.264 compression video files are considerably
smaller making high definition video more affordable. In addition the
Pelco IEE20DN8-1 features Camera Sabotage behavior detection. Camera
Sabotage detects contrast changes in the field of view. An alarm is
triggered if the lens is obstructed with spray paint, a cloth, or
covered with a lens cap. Any unauthorized repositioning of the camera
also triggers an alarm. All of the above coupled with Pelco’s world
class reliability make the Pelco IEE20DN8-1 an excellent choice for any
IP Video Surveillance System. |
|
Features |
- Up to 2.1 Megapixel Resolution
(1920 x 1080)
- Up to 30 Images per Second (ips)
at 1080P HD
- Auto Back Focus for High Precision
Focusing
- H.264, and MJPEG Compression
- Sensitivity Down to 0.03 lux
- Focus Button with Delay Enables
Precision Focus Through Bubble
- Up to 2 Simultaneous Video Streams
- Web Viewing, up to 16 Cameras
Simultaneously
- Local Storage (Micro SD) for Alarm
Capture
- Motion Detection
- Bi-directional Full-Duplex Audio
- Open IP Standards
- Vandal Proof
- Camera Sabotage behavior detection
|
|
Specifications |
|
Construction |
Cast aluminum body with polycarbonate
bubble |
|
Finish |
Light gray powder coated |
|
Imaging Device |
1/3-inch (effective) |
|
Imager Type |
CMOS |
|
Imager |
Readout Progressive scan |
|
Maximum Resolution |
1920 x 1080 |
|
Signal-to-Noise Ratio |
50 dB |
|
Auto Iris Lens Type |
DC drive |
|
Electronic Shutter Range |
1 ~ 1/10,000 sec |
|
Wide Dynamic Range
|
60 dB |
|
White Balance Range |
2,000° to 10,000°K |
|
Sensitivity
|
f/1.2; 2,850°K; SNR >24dB
Color (1x/33 ms) 0.50 lux
Color SENS (15x/500 ms) 0.12 lux
Mono (1x/33 ms) 0.25 lux
Mono SENS (15x/500 ms) 0.03 lux |
|
Dome Attenuation |
Zero light loss |
|
Port |
RJ-45 connector for 100Base-TX
Auto MDI/MDI-X |
|
Cabling Type
|
Cat5 or better for 100Base-TX |
|
Power Input
|
24 VAC or PoE (IEEE 802.3af class 3) |
|
Power Consumption |
<7 W; <40 W with heater operation |
|
Local Storage
|
Micro SD |
|
Alarm Input |
10 VDC maximum, 5 mA maximum |
|
Relay Output
|
0 to 15 VDC maximum, 75 mA maximum |
|
Service Port |
External 3-connector, 2.5 mm provides
NTSC/PAL video output |
|
Lens Mount |
CS mount, adjustable |
|
Pan/Tilt Adjustment |
Pan 368°
Tilt 160° (10° to 170°)
Rotate 355° |
|
Video Encoding |
H.264 high, main, or base profile and
MJPEG |
|
Video Streams
|
Up to 2 simultaneous streams; the second
stream is variable based on the setup of the primary stream |
|
Frame Rate |
Up to 30, 25, 24, 15, 12.5, 12, 10, 8, 7.
5, 6, 5, 4, 3, 2.5, 2, 1 |
|
Supported Protocols |
TCP/IP, UDP/IP (Unicast, Multicast IGMP),
UPnP, DNS, DHCP, RTP, RTSP, NTP, IPv4, SNMP, QOS, HTTP, HTTPS, LDAP
(client), SSH, SSL, SMTP, FTP, mDNS (Bonjour), and 802.1x (EAP) |
|
Users |
Unicast Up to 20 simultaneous users
depending on resolution settings (2 guaranteed streams)
Multicast Unlimited users H.264 or MPEG-4 |
|
Security Access |
Password protected |
|
Software Interface |
Web browser view and setup, up to 16
cameras |
|
Pelco System Integration |
Endura 2.0 (or later), Digital Sentry 4.2
(or later) |
|
Open IP Integration |
Pelco IP camera API |
|
Operational Temperature |
–22° to 122°F (–30° to 50°C); PoE operates
between 32° to 122°F (0° to 50°C), 24 VAC power is required for heater
operation below 32°F (0°C) |
|
Thermostat Operation |
Heater thermostatically controlled to
operate below 41°F (5°C) |
|
Operational Humidity |
20% to 80%, noncondensing |
|
Dimensions |
5.4" D x 3.1" W x 3.0" H (13.7 x 7.9 x 7.6
cm) |
|
Weight (without lens) |
3.3 lb (1.5 kg) |
M-20110715-1300-130-E
*This item is BRAND NEW -
not refurbished. It comes with all manufacturer supplied accessories, and full
manufacturer's USA warranty.
|
