Pelco TXB-IP-F Spectra IV IP Network-based
Communication Module for In-Ceiling Model Back Boxes, Ability to Control and
Monitor Video Over IP Networks, Without Losing Analog Capabilities, 3
Simultaneous Video Streams, Supported Protocols: TCP/IP, UDP/IP (Unicast,
Multicast IGMP), UPnP, DNS, DHCP, RTP, NTP, UPC 700880242469, Single Cat5e Cable
for Video, Bidirectional Full-Duplex Audio, Compatible with NTCIP Camera Control
Protocol and the Following Controllers: American Dynamics, Bosch® (Phillips,
Burle), Hernis, Sensormatic, and Vicon (as specified), Converts Third-Party
Command Signals to Pelco’s D Protocol, For Use in Spectra Domes, Spectra Mini
Domes, ExSite Series Systems, and Esprit Series Systems, Easy to Install,
Operation Transparent to User
General Information |
Manufacturer |
Pelco |
Manufacturer Part Number |
TXB-IP-F |
Product Name |
Spectra IV IP Network-based Communication Module
for In-Ceiling Model Back Boxes |
UPC Code |
700880242469 |
Marketing Information |
The TXB-IP is a network-based
communication module for all Spectra® IV camera systems (excluding
pressurized and surface mount models). This new product allows an
existing Spectra IV camera system to retain all of its current system
and analog capabilities while adding IP connectivity. When the TXB-IP is
plugged into a Spectra IV back box, the camera system features Web and
Endura® connectivity, as well as open architecture connectivity to
third-party software. Pelco offers an industry leading application
programming interface (API) for interfacing with Pelco's network camera
systems.
The TXB-IP allows simultaneous access to the camera from both an analog
and IP-based control point.
NOTE: The TXB-IP can only be used with Spectra IV back boxes. It is not
compatible with Spectra III™ and older model back boxes. |
Features |
- Ability to Control and Monitor
Video Over IP Networks, Without Losing Analog Capabilities
- 3 Simultaneous Video Streams
- Supported Protocols: TCP/IP,
UDP/IP (Unicast, Multicast IGMP), UPnP, DNS, DHCP, RTP, NTP
- Single Cat5e Cable for Video
- Bidirectional Full-Duplex Audio
- Compatible with NTCIP Camera
Control Protocol and the Following Controllers: American Dynamics,
Bosch® (Phillips, Burle), Hernis, Sensormatic, and Vicon (as
specified)
- Converts Third-Party Command
Signals to Pelco’s D Protocol
- For Use in Spectra® Domes, Spectra
Mini Domes, ExSite® Series Systems, and Esprit® Series Systems
- Easy to Install
- Operation Transparent to User
|
Specifications |
GENERAL |
Construction |
Printed circuit board (PCB) enclosed in an
aluminum housing |
Mounting
|
Plugs into interconnect PCB of Spectra IV
back boxes |
Dimensions (HxLxW) |
6.50 x 1.50 x 9.75 Inches |
Weight |
0.60 Lbs |
VIDEO |
Compression |
MJPEG, MPEG-4 (available only with
Microsoft® Internet Explorer®) |
Video Streams
|
3, simultaneous |
Video Resolutions
|
NTSC PAL
4CIF 704 x 480 704 x 576
2CIF 704 x 240 704 x 288
CIF 352 x 240 352 x 288
QCIF 176 x 120 176 x 144 |
Bit Rate Configurable |
MPEG-4 30 ips; 2 Mbps for primary stream,
1 Mbps for secondary stream; implements EnduraView™
MJPEG 15 ips, 3 Mbps, MJPEG |
Web User Interface
|
Pelco Device Utility interface for viewing
HTTP, requires Java Runtime Environment (JRE™) |
Users
|
5 simultaneous users MJPEG and MPEG-4
unicast; unlimited number of users through multicast (MPEG-4 only) |
Minimum System Requirements |
Processor Intel® Pentium® 4
microprocessor, 1.6 GHz
Operating System Windows® 98, Windows 2000, Windows XP (or later) or
Mac®
OS X 10.3.9 (or later)
Memory 512 MB RAM
Network Interface Card 100 megabits
Web Browser Internet Explorer 5.5 (or later); Mozilla® Firefox® 1.5 (or
later))
Monitor Minimum of 1024 x 768 resolution, 16- or 32-bit pixel color
resolution
Firmware Upgrade Pelco Device Utility or Endura Application
Supported Protocols TCP/IP, UDP/IP (unicast, multicast IGMP),UPnP, DNS,
DHCP, RTP, NTP |
AUDIO |
Streaming
|
Bidirectional: full or half duplex |
Input/Output
|
Terminal block, analog for microphone and
speaker; 600-ohm differential; 1 Vp-p maximum signal level |
Compression
|
G.711 PCM 8 bit, 8 kHz mono at 64 kbit/s
|
ELECTRICAL |
Network Connection |
Ethernet 10/100Base-T, Cat5e cable with
RJ-45 connector |
Input Voltage |
24 VAC |
Power Consumption
|
2.7 W |
A-20110201-1300-130-E
*This item is BRAND NEW -
not refurbished. It comes with all manufacturer supplied accessories, and full
manufacturer's USA warranty.
|