|
Raymarine E62115-US Widescreen C140W 14.1"
Multifunction Display with WXGA Resolution and Built-in WAAS Compatible GPS,
Includes Preloaded U.S. Continental Coastal Charts, Super high WXGA resolution
1280 x 800 pixels, Sunlight Viewable display with Optical Bonding technology for
improved color and contrast in all lighting conditions, Intuitive UniControl pad
simplifies display and menu navigation, Patented HD Digital sonar technology for
precise targeting of fish and bottom structure, Four fishfinder presets for one
touch access to favorite fishfinder view, HD Digital and Super HD Digital open
array compatibility, Auto GST technology to provide hands off operation, Dual
Range radar when used with HD or Super HD Digital Arrays
|
General Information |
|
Manufacturer |
Raymarine |
|
Manufacturer Part Number |
E62115-US |
|
Product Name |
Widescreen C140W 14" Multifunction Display with
WXGA Resolution and Built-in WAAS Compatible GPS, Includes Preloaded U.S.
Continental Coastal Charts |
|
Marketing Information |
|
The all new C-Series
Widescreen redefines multifunction navigation with larger, brilliant
displays, increased performance, expanded networking and video
integration. These high resolution displays give captains a commanding
view of multiple sources of information without compromising
readability. Choose full screen navigation or choose multiple widescreen
window combinations of chart, radar, fishfinder, weather and video –
C140W gives you the flexibility to create the ideal screen configuration
for every navigation scenario.
The 14” C140W features a high resolution 1280 x 800 pixel (WXGA)
widescreen display. The C140W is sunlight viewable and utilizes optical
bonding technology for improved contrast, vibrant colors and a wide
viewing angle. Display and menu navigation is also simplified with the
all new UniControl™ pad.
C140W is ready to navigate with an internal high sensitivity GPS sensor.
C-Series Widescreen displays are also pre-loaded with ready-to-navigate
Navionics charts of the Coastal U.S. Navigate with high quality
pre-loaded Navionics charts or step up to 3D or Satellite photo charts
using optional Navionics Platinum charts on CompactFlash. An on board
graphics coprocessor provides quick chart screen redraws and stunning 3D
graphics.
Building your C-Series Widescreen Network is easier than ever with
SeaTalkhs. Build a single widescreen display or create a dual display
C-Series Widescreen network using SeaTakhs to share radar,
chartplotting, fishfinder, weather and navigation functions between two
C-Series Widescreen displays. The C140W also supports SeaTalk and
SeaTalkng protocols for seamless integration with a Raymarine external
GPS sensor, LifeTag, SeaTalk instruments and SeaTalk autopilots.
NMEA0183 and NMEA2000 support is also standard on the C140W providing
easy integration with 3rd party electronics and engine monitoring.
Using SeaTalkng, C-Series Widescreen and SmartPilot X-Series autopilots
go beyond conventional chartplotter-autopilot communication. C-Series
Widescreen displays can actually control autopilot functions from the
chartplotter interface. An autopilot dialog enables the captain to
engage and disengage the autopilot directly from the C-Series display
offering added convenience when using Raymarine’s SmartPilot X-Series
for waypoint and route navigation.
Each C-Series Widescreen display also feature a video input for on-board
cameras. Raymarine Marine Cameras are plug-and-play and offer
outstanding video quality and durability in the marine environment.
The Raymarine C140W kit includes an owners manual, quick reference
guide, suncover, flush mounting kit, and a Power/data/video cable. |
|
Features |
- Command view of multiple
navigation sources on single widescreen display
- Simply connect the appropriate
sensor to transform the C-Series Widescreen display into a full
function chartplotter, digital fishfinder, weather, radar or on
board video system.
- Sunlight Viewable display with
Optical Bonding technology for improved color and contrast in all
lighting conditions
- Super high WXGA resolution - 1280
x 800 pixels
- Intuitive UniControl™ pad
simplifies display and menu navigation
SeaTalkhs Networking
- Super fast 100 Megabit networking
- Dual display networking - Share
chartplotter, fishfinder, radar, weather and more across two
C-Series Widescreen displays
Chartplotter
- Preloaded with Navionics
ready-to-navigate cartography
- Internal high sensitivity GPS
sensor
- 3D and Satellite photo maps using
optional Navionics Platinum Charts
Digital Fishfinder
- Connect to DSM30 or DSM300 using
SeaTalkhs
networking.
- Patented HD Digital sonar
technology for precise targeting of fish and bottom structure.
- Four fishfinder presets for one
touch access to favorite fishfinder view
Radar
- Compatible with SeaTalkhs
digital radomes
- HD Digital and Super HD Digital
open array compatibility
- Auto GST technology to provide
hands off operation
- Dual Range radar when used with HD
or Super HD Digital Arrays
SIRIUS
Weather & Audio
- SIRIUS Satellite weather and radio
functionality with optional SR100 receiver
- View up to the minute animated
weather radar, forecasts, storm warnings and more delivered
instantly via satellite.
- Graphical Nowrad radar, sea
surface temps, storm tracks, and more.
- SIRIUS Satellite Radio
functionality right on your C-Series Widescreen display. Set
reminders for favorite songs and artists on over 100 SIRIUS
Satellite Radio channels.
Video
Integration
- Display remote video sources from
CCTV cameras, entertainment systems, and more.
- Plug and play connectivity with
Raymarine CAM100 or CAM50 marine cameras
Instrument Integration
- Network with SeaTalk, SeaTalk2,
SeaTalkng,
SeaTalkhs, NMEA
0183 or NMEA 2000 instruments.
- Display data from NMEA 2000
compatible engine systems.
Autopilot Integration
- Activate and control Raymarine
Smartpilot X-Series Autopilots directly from the chartplotter
interface
|
|
Specifications |
|
General |
|
Data Display Capabilities |
GPS, Chartplotter, Fishfinder, Radar,
External Video, CDI(Course Deviation Indicator), and
customizable Data Bar display
|
|
Dimensions
|
16.67" x 10.9" x 6.14" (423.4 x 276.8 x
155.9) Depth measurement includes power cable |
|
Display (LCD) size |
14.1"
|
|
Display colors |
16.7M
|
|
Display resolution |
1280 x 800 pixels (wide XGA)
|
|
Display type
|
Sunlight viewable color TFT LCD
|
|
Mounting Methods |
Console mounting hardware included.
Trunnion mounting kit sold separately
|
|
Operating and non operating temperature
limits |
14°F to 122°F (-10°C to 50°C) ambient air
at 95% RH
|
|
Power consumption
|
32 Watts (typical)
|
|
Voltage range |
10.7–32 volts (12/24v nominal)
|
|
Waterproofing
|
CFR46/IPX6 standards
|
|
Weight
|
12.3lbs (5.58kg) |
|
Approvals CE - conforms to FCC - compliant
with
|
Essential requirements of 1995/5/EC,
1989/336/EC. CFR47 Parts 2 & 80
|
|
Humidity limit
|
up to 95% at 35°C non-condensing
|
|
Display Windows |
Chart, Radar, Fishfinder, CDI, Video,
Data, Weather, Engine Monitor, Tutorial
|
|
Screen Functions |
Full, half and quarter screens available
dependant on function. Also 3 window page with 2 x 1/4 page windows and
1 x 1/2 page window.
|
|
Illumination
|
Screen and keypad: 0 to 100% in 64 steps
Day/Night Mode
|
|
Languages |
English (US), English (UK), Italian,
French, Spanish, German, Norwegian, Dutch, Swedish, Danish, Portuguese,
Finnish, Icelandic, Chinese, Russian, Greek, Japanese, Korean
|
|
System Alarms
|
Alarm clock, Anchor, Arrival, Deep,
Shallow and Fishing Depth, MOB, Offtrack, Temperature, Timer
|
|
Navigation Alarms
|
Arrival alarm, offtrack XTE alarm. |
|
Interfaces |
|
Network Configurations
|
Single, dual or multiple display
configurations.
|
|
SeaTalkhs Network
|
2 port
Supports 8 devices
Optional network switch required |
|
NMEA interface |
3 inputs (configurable baud rate)
2 outputs |
|
NMEA 0183 Input |
GLL, GGA, GLC, GTD, VTG, BWC, BWR, RMA,
RMB, RMC, XTE, VHW, HDG, HDM, HDT, DBT, DPT, APB, VLW, MWV, WPL, RTE,
DSC and ZDA. Selectable to 4800, 4800 Navtex, 9600 Navtex or 38,400 AIS
|
|
NMEA Output - User selectable
|
APB, BWC, BWR, DBT, DPT, GGA, GLL, MTW,
RMA, RMB, RMC, RSD, TTM, VLW, VHW, VTG, WPL, VHF/DSC and ZDA
|
|
SeaTalk Interface |
1 port
|
|
SeaTalk Input
|
Depth,SOG,COG, Position, Waypoint number,
range/ bearing, TTG, Boat speed, Time, XTE, Heading, Wind, data,
Log/Trip, Pilot status, Temperature, MOB and cursor position
|
|
SeaTalk Output
|
Cursor data, guard zone and navigational
data bridged from NMEA
|
|
SeaTalk2/NMEA2000 |
1 port
Also supports SeaTalkng (Next Generation data bus) connectivity. Adapter
cables required for SeaTalkng and NMEA2000 |
|
Video Input
|
Composite Video (NTSC or PAL) Input (BNC
connector) |
|
GPS |
|
GPS Type |
Internal High Sensitivity Receiver
|
|
Channels
|
12 |
|
Frequency |
1.575GHz (L1)
|
|
Sensitivity
|
-159dBm (tracking), -142dBm (acquisition)
|
|
SBAS Support
|
WAAS / EGNOS Compatible
|
|
Horizontal Position Accuracy
|
<=15 metres 95% typical (without SA), <=
5metres 95% with WAAS/EGNOS
|
|
Speed Accuracy
|
<=0.3kts
|
|
Antenna |
Helical antenna for even sensitivity
across all orientations |
|
Chartplotter |
|
Cartography
|
Embedded Navionics Cartography: US Coastal
(Lower 48 States) |
|
Cartography
|
Compatible with Navionics Charts on
CompactFlash cards
|
|
Chart Scaling
|
1/32nm (if cartographic detail is
available) to 4000nm |
|
Waypoints
|
3000 waypoints entered via touch, cursor,
lat/lon, range and bearing from present position or at boat’s position.
16 character name can be assigned. Waypoint symbols and groups.
Additional storage available on CompactFlash cards.
|
|
Waypoint Transfer
|
Waypoints database via NMEA and
CompactFlash cards. Software also available to convert waypoints to
Excel file.
|
|
Man Overboard (MOB Mode) |
Mark placed with course line; readout
shows range, bearing, lat/lon of MOB and time elapsed since MOB.
|
|
Presentation Modes
|
Head up, Course up or North up (selectable
True or Mag-netic). Relative, Autorange or True Motion. Screen offset.
Radar or 3D synchronization.
|
|
Routes |
A route plan may contain up to 50
waypoints. Up to150 routes can be stored in the units internal memory.
Additional storage available on CompactFlash cards. SmartRoute to create
a route from track history.
|
|
Track History |
15 tracks with up to 3000 points in each
can be stored in the units internal memory. Track optimization reduces
number of points used or user selectable time or distance interval.
Additional storage available on CompactFlash cards.
|
|
Radar/Chart overlay
|
Radar image can be overlaid on all screen
charts.
|
|
Radar/Chart synchronization
|
To synchronize radar range and chart scale
|
|
3D/Chart Synchronization |
To synchronize synchronize 3D and 2D chart
scales and orientation |
|
Aerial overlay
|
Overlay of aerial photograph on the chart
|
|
Weather Overlay |
Nowrad overlay on chart and access to
Weatehr Reports from chart window
|
|
AIS overlay
|
Switch AIS symbols on/off. Display
heading/speed vectors and ROT. View detailed AIS data, safety critical
target data, ALR and SRM messages. Set up a safe zone.
|
|
Navigation information
|
Own boats position in lat/lon, XTE, TTG
and SOG/COG selectable. Bearing and distance to waypoint. Bearing and
distance to cursor and ETA.
|
|
3D Presentation Modes
|
Active motion/planning mode; Head up,
Course up, or North Up; Adjust rotation and pitch; Vessel offset |
|
3D Display
|
Declutter, Transducer cone, Depth scale,
Waypoint name, Adjust exaggeration, 3D view locator
|
|
Fishfinder |
|
Transducer
|
Transom-mount, in-hull or thru-hull
options
|
|
Digital Sounder Modules
|
Compatible with the DSM30 and DSM300 |
|
Receiver Type |
Patented Raymarine HD Digital receiver
technology
|
|
Power output
|
Dependant on Digital Sounder Module
|
|
Frequency
|
Dependant on Digital Sounder Module
|
|
Alarms
|
Fish alarm, fish alarm depth, shallow and
deep fish limit
|
|
A-Scope Display |
Displays Sonar Returns in real time
|
|
Bottom Coverage Display |
Shows the diameter of the transducer beam
where it meets the bottom.
|
|
Bottom Lock
|
Displays echoes directly above the bottom.
|
|
Range markers
|
Easily see how far the boat is from a
target on the echo sounder screen
|
|
Target Detection |
Sonar fish echo with target depth readout
|
|
Zoom
|
2,3,4x and user programmable Zoom scales |
|
Radar |
|
Radar Support
|
Support for all Digital, HD Digital &
Super HD Digital Radars
|
|
Image Type
|
Color Radar Support (HD & SHD Radars Only)
|
|
Range Scales (Range Rings) |
1/8 (1/16)nm to 72 (12) nm dependant on
scanner Performance limited by scanner type and position.
|
|
Range Ring Accuracy
|
Better than +/- 1.5% of the max. range
scale in use, or 22m (72 ft.), whichever is the greatest.
|
|
Bearing accuracy |
+/- 1°
|
|
Variable Range Markers
|
2 x VRM’s, readout nm, sm, km
|
|
Electronic Bearing Lines
|
2 x EBL’s, floating if required,
resolution 1°
|
|
Bearing scale
|
360° graduated at 10° intervals 2° small
ticks 10° large ticks
|
|
Minimum range |
23m (25 yds)
|
|
Range Discrimination
|
23m (25 yds)
|
|
Presentation Modes
|
Head up, Course up or North up (selectable
True or Mag-netic) Relative or True Motion
|
|
Scanner Control
|
Interference rejection, standby/transmit
modes, pulse selection, Tune, Rain, FTC and Sea controls, with selection
of manual or automatic control of gain, sea clutter and tune (Auto GST)
|
|
Compass Input |
NMEA 0183 (required for fast heading data,
suitable for MARPA), or SeaTalk
|
|
Waypoint Display |
Create waypoints and target waypoint
displayed with User control of symbols and groups
|
|
MARPA
|
Manual acquisition of up to 25 targets
(dependent upon scanner type), automatic tracking, dangerous target
alarms, safe zone, target history, true or relative vectors, CPA
graphics and indication of target speed/ course, bearing/ range, CPA and
TCPA. |
|
Guard Zone Alarm |
2 guard zones, selectable sensitivity
level, audible alarm
|
|
Automatic Tuning |
Auto control of gain, sea clutter and
tune.
|
|
Off Center function
|
In Relative Motion, 1/3 or 2/3
|
|
Wakes
|
10s, 30s, 1 min, 5 min & 10 min options
|
|
Target Expansion
|
Operator selectable with 2 levels
available
|
|
Timed TX
|
Rotation periods: 10, 20 or 30 scans
Repetition periods: 3, 5, 10 or 15 minutes
|
|
AIS overlay
|
Switch AIS symbols on/off. Display
heading/speed vectors and ROT. View detailed AIS data, safety critical
target data, ALR and SRM messages. Set up a safe zone. |
|
Instrument and Engine Data |
|
Data Pages |
5 pages available. Pre-defined
(Navigation, Waypoint, Route, Fishing or Sailing) or user-configured.
|
|
Data available
|
Vessel position, active waypoint, TTG, VMG
- Waypoint, depth, COG SOG, heading, speed, set/drift, trip, log, ground
log, ground trip, rudder, local time and date, sea temperature, app
wind, true wind, VMG wind, ground wind XTE,compass,locked heading, way
|
|
Engine Pages
|
5 pages available. Pre-defined (engine,
engine and fuel, fuel resources, engine and resources, twin engines or
triple engine support) or user-configured.
|
|
Engine Data available
|
Tacho, boost pressure, alternator, oil
pressure, coolant temperature, engine hours, fuel level (tanks 1 & 2),
fuel rate, total fuel, load.
|
|
AIS |
|
AIS Suppport
|
Support for class B AIS
Supports silent mode |
|
Target symbols
|
Sleeping, activated, selected, dangerous
and lost.
|
|
Target information
|
AIS vectors, buddy tracking, safety
critical data and full AIS data.
|
|
Collision avoidance
|
Safe zones and safety messages.
|
|
Alarms
|
Local alarm messages, lost targets
|
|
NAVTEX |
|
Alerts
|
Incoming message (selectable categories)
|
|
Message List |
Sorting |
|
Weather |
|
Type |
SIRIUS Marine Weather
|
|
Weather elements |
Storm cast, waves, Canadian radar,
lightning, wind, sea sur-face temperature, surface observations
stations, city weather, NOWRad, storm tracks, surface pressure.
|
|
Animated weather graphics |
Weather forecast, weather radar history
|
|
Weather reports
|
Tropical statements, marine warnings,
marine zone fore-casts, marine watchbox.
|
A-20110407-1404-130-L
*This item is BRAND NEW -
not refurbished. It comes with all manufacturer supplied accessories, and full
manufacturer's USA warranty.
|
