RDL FP-SPR1 Flat Pak Series SP Digital Interface Repeater Amplifier; Correct SPDIF signal level from long line; Conversion between SPDIF connector types; BNC, phono, and optical inputs; BNC, phono, and optical outputs; Reshape SPDIF waveforms; Virtually jitter free performance; Convenience of RDL FLAT-PAK; UPC 813721012494; Dimensions 1.34" x 3.25" x 8.26", Shipping Dimensions 3.63" x 4.63" x 2.13", Weight 0.38 lbs, Shipping Weight 0.55 lbs

General Information
Manufacturer	RDL
Manufacturer Part Number	FP-SPR1
Product Name	Flat Pak Series SP Digital Interface Repeater Amplifier
UPC Code	813721012494
Overview
The FP-SPR1 is the ideal product for applications requiring either conversion between SPDIF connector types or recovery of low SPDIF signal levels Power connections are made using either the full size barrier block terminals or a dc power jack located in one end panel. A second dc power jack is provided on the other end panel for connecting additional FLAT-PAK modules The FP-SPR1 is a single channel module featuring three separate inputs. An input is provided in each conventional SPDIF format: BNC, phono and optical. Any one of these inputs may be used A coaxial input has priority over the optical input. Three output jacks are also provided: BNC, phono and optical. Either of the coaxial jacks may be used and or the optical output may be connected It is possible to use only one of the three outputs or use one coaxial and the optical output simultaneously. A front panel SIGNAL LED illuminates when an input signal of sufficient amplitude is received to produce the correct output from the module
Features
Correct SPDIF signal level from long line Conversion between SPDIF connector types BNC, phono, and optical inputs BNC, phono, and optical outputs Reshape SPDIF waveforms Virtually jitter free performance Convenience of RDL FLAT-PAK
Pictures
Specifications
Inputs	75 Ohms BNC coaxial, 75 Ohms phono coaxial, optical
Input Level	100 mV to 2.5 V p-p (coaxial)
Outputs	75 Ohms BNC coaxial, 75 Ohms phono coaxial, optical
Output Level	500 mV p-p (coaxial)
Frequency Range	28 kHz to 48 kHz
Indicator	Signal present LED
Jitter	Less than 200 pS (input signal 200 mV p-p or greater), Less than 1 nS (input signal 100 mV p-p)
Ambient Operating Environment	-10C to 55C
Power Requirement	GROUND-REFERENCED, 24 Vdc at 80 mA Note: May operate from 12 Vdc in standalone installations
Dimensions	1.34" x 3.25" x 8.26"
Shipping Dimensions	3.63" x 4.63" x 2.13"
Weight	0.38 lbs
Shipping Weight	0.55 lbs

A-20170711-1505-210-L

*This item is BRAND NEW - not refurbished. It comes with all manufacturer supplied accessories, and full manufacturer's USA warranty.