|
General Information
|
|
Manufacturer
|
RDL
|
|
Manufacturer Part Number
|
RDL-RUAVX4
|
|
Product Name
|
Rack Up
Series Audio Video Switcher, 4x1 RCA |
| UPC Code |
813721013118
|
|
Overview
|
The RU-AVX4 is the ideal
choice in installations where a single set of audio andvideo
signals needs to be selected from up to 4 consumer format (phono
jack) video and audio sources. Video signal quality, audio
performance and pushbutton durability are equal to that found in
professional switchers
Audio and video source selection uses all solid-state switching.
High quality audio and video line driver amplifiers feed the
module output
The RU-AVX4 has four separate inputs and a single output on the
rear panel. The inputs and output provide one video phono jack and
two associated (left and right) audio phono jacks
When power is first applied to the module, input 1 (default) is
automatically selected. Four keyboard style long-life pushbuttons
on the front panel are used to select one of the inputs at a time
When a button is pushed, the corresponding video and audio input
is fed to the output of the RU-AVX4 and any previously selected
source is shut off. Only one source may be selected at a time
The RU-AVX4 rear-panel terminal block provides four connections to
remotely control the module. A momentary external closure to
ground on an input terminal will select the associated input
Continuous remote closures will select inputs while disabling
source selection by the front-panel buttons. An LED indicator
above each front-panel button shows which input is selected
|
|
Features
|
- Video and stereo audio switching
- Four video and four stereo audio
inputs
- Consumer format input and output
jacks
- 10 MHz video bandwidth NTSC or
PAL
- Long life keyboard style
pushbuttons
- Rear panel remote control
connections
- Professional quality performance
|
|
Pictures
|
|
|
Specifications
|
VIDEO:
|
|
Inputs
(4)
|
75
Ohms, phono jack with gold contacts
|
Input
level
|
1 V
p-p
|
Output
|
75
Ohms, phono jack with gold con
|
Frequency
Response
|
10 Hz
to 10 MHz (More or less 0.35 dB)
|
Residual
Noise
|
Less
than -70 dB referred to 1 V p-p video
|
| Off
attenuation |
Greater
than 78 dB
|
| Differential
gain |
0.1
percent
|
Differential
phase
|
Less
than 0.3 degree
|
| AUDIO: |
|
| Inputs
(4) |
10
kOhms, unbal stereo (left and right) phono jack
|
| Gain |
Unity
nominal (+0, -1 dB)
|
| Input
level |
-10
dBV nominal
|
| Output |
75
Ohms, unbal stereo (left and right) phono jacks
|
| Frequency
Response |
10 Hz
to 60 kHz (More or less 0.05 dB)
|
| Total
Harmonic Distortion |
Less
than 0.010 percent (20 Hz to 20 kHz)
|
Headroom
|
Greater
than 20 dB (at rated in/out level of -10 dBV)
|
Noise
|
-95
dB, -10 dBV ref. (20 Hz to 20 kHz) |
OFF
attenuation
|
Greater
than 74 dB (20 Hz to 20 kHz)
|
Crosstalk
|
Below
noise floor (inputs terminated)
|
| Power Requirement |
GROUND REFERENCED, 24 Vdc at 100 mA |
| Ambient Operating Environment |
0C to 55C
|
| Shipping Dimensions |
4.38" x 7.00" x 2.25" |
| Weight |
0.95 lbs
|
| Shipping Weight |
1.19 lbs |
