RDL RDL-RUSQ6A Rack Up Series Sequencing Controller with Power Up, and Power Down; Control of sequential power-Up or events; Adjustable Up and Down time interval; Open collector outputs; Relay contact closures; Up to six sequential events; Sure-Lok output supervision; Dimensions 1.70" x 5.80" x 3.45"; Shipping Dimensions 4.38" x 7.00" x 2.25"; Weight 0.87 lbs; Shipping Weight 1.11 lbs; UPC 813721013187

General Information
Manufacturer	RDL
Manufacturer Part Number	RDL-RUSQ6A
Product Name	Rack Up Series Sequencing Controller with Power Up, and Power Down
UPC Code	813721013187
Overview
The RU-SQ6A is the ideal choice in installations where sequential ON and sequential OFF functions are desired. Control and output connections are made on the rear panel through clearly identified detachable terminal blocks Two types of outputs are provided for each of the 6 sequential steps. One type is an open collector capable of switching loads of 50mA. The other type is an SPST dry contact closure which may be used to control a variety of equipment A single turn front panel TIMING INTERVAL control adjusts the time delay between channels from 1 to 10 seconds. Front panel LEDs show when each output channel turns on and off. An internal microcontroller insures reliable, accurate timing The up or down sequence is user controlled by a front panel pushbutton switch unless the module is set for remote operation. A rear panel switch set by the installer selects either front panel or remote control activation. LEDs indicate whether the front panel SEQUENCE CONTROL switch or the remote terminals are active Grounding the rear panel ACTIVATE terminals or turning on the front panel SEQUENCE CONTROL switch causes an UP REQUEST that starts the RU SQ6A outputs to turn on sequentially. The outputs remain active until the UP REQUEST is cancelled by turning off the front panel or remote control switch, causing the outputs to turn off in reverse sequence If the ACTIVATE terminal is permanently grounded with the module set for remote control, the RU-SQ6A outputs will turn on sequentially when power is applied to the module; all outputs will turn off simultaneously when power is removed from the RU-SQ6A The UP REQUEST LED is illuminated when an UP sequence is requested. When the sequence is complete, the COMPLETE LED indicates the Sure-Lok supervisory circuit is actively latching the outputs active until the user deactivates the sequence
Features
Control of sequential power-Up or events Adjustable Up and Down time interval Open collector outputs Relay contact closures Up to six sequential events Sure-Lok output supervision
Pictures
Specifications
Control Input	External closure less than 2.5 mA at 24 Vdc
Interval Between Outputs	1 to 10 seconds nominal, front-panel adjustable
Indicators (10)	Red LEDs indicating channel 'on' condition (6) Green LED indicating UP REQUEST Green LED indicating sequence COMPLETE Red / Green LEDs indicating Remote or Front-Panel Activation
24 Vdc Output	1.1 A maximum, 100 mA less than power supply current
Open Collector (6)	200 mA surge; 50 mA continuous; 200 mA maximum
Relay Outputs (6)	SPST (closed when active)
Maximum Switching Power	60 W (220 Vdc, 125 Vac, 2A)
Maximum Switching Voltage	220 Vdc, 250 Vac
Maximum Switching Current	2 A
Maximum Carrying Current	3 A
Power Requirement	24 Vdc at 100 mA (plus total load current connected to 24 Vdc output)
Ambient Operating Environment	0C to 50C
Dimensions	1.70" x 5.80" x 3.45"
Shipping Dimensions	4.38" x 7.00" x 2.25"
Weight	0.87 lbs
Shipping Weight	1.11 lbs

A-20170810-1505-210-L
M-20191205-1505-254-L
M-20200119-1505-253-L

*This item is BRAND NEW - not refurbished. It comes with all manufacturer supplied accessories, and full manufacturer's USA warranty.