RDL ST-GLA1 Stick On Series Gated Line Amplifier, Noise Gate; Gated line level preamplifier; Self gating to suppress unwanted noise; Fast, silent audio switching; Integral single ended noise reduction; Adjustable gain and threshold; Balanced or unbalanced input output; Open collector logic output; Dimensions 0.70" x 3.00" x 1.60"; Shipping Dimensions 2.00" x 2.00" x 4.00"; Weight 0.15 lbs; Shipping Weight 0.20 lbs; UPC 813721012135

General Information
Manufacturer	RDL
Manufacturer Part Number	ST-GLA1
Product Name	Stick On Series Gated Line Amplifier, Noise Gate
UPC Code	813721012135
Overview
The ST-GLA1 is a self gated line amplifier designed to be used in a variety of situations where it is desired to produce an automatically switched line level signal with integral noise reduction This module may be used in conjunction with other RDL modules to configure automatic mixing systems or may be used alone as a noise gate The open collector slave output may be used to trigger other equipment or RDL modules The versatility of ST-GLA1 applications range from complete automatic mixing system design to the addition of automatic gating to the inputs of conventional mixers or amplifiers to suppress accumulated or induced system noise The input and output may be wired balanced or unbalanced. Two LED indicators are provided for adjustment
Features
Gated line level preamplifier Self gating to suppress unwanted noise Fast, silent audio switching Integral single ended noise reduction Adjustable gain and threshold Balanced or unbalanced input output Open collector logic output
Pictures
Specifications
Input	10 kOhms balanced or unbalanced, bridging
Input Level	-15 dBV to +4 dBu
ON Gain	Adjustable to produce +4 dBu output for rated input signal range
Audio Outputs	+4 dBu nominal, 150 Ohms balanced, terminal block
Headroom	Greater than 16 dB (above +4 dBu)
THD+N	Less than 0.2 percent
Frequency Response	10 Hz to 30 kHz (More or less 0.25 dB)
Residual Noise	Less than -95 dB (below +4 dBu muted)
Output	150 Ohms; (+4 dBu Balanced, -10 dBV unbalanced)
Switching Time	30 ms
Off Delay	2 seconds nominal (may be extended using external capacitor)
Control Output	Open collector at 50 mA
Muting Attenuation	Greater than 60 dB (referred to input signal level)
Muting Threshold	−16 dB to −35 dB (adjustable, referred to +4 dBu)
Detector Bandwidth	20 Hz to 5 kHz
Ambient Operating Environment	0C to 55C
Power Requirement	GROUND-REFERENCED or FLOATING 24 Vdc at 75 mA
Dimensions	0.70" x 3.00" x 1.60"
Shipping Dimensions	2.00" x 2.00" x 4.00"
Weight	0.15 lbs
Shipping Weight	0.20 lbs

A-20170710-1505-210-L

*This item is BRAND NEW - not refurbished. It comes with all manufacturer supplied accessories, and full manufacturer's USA warranty.