RDL TX-TPR1A Series TX Active Single Pair Receiver Twisted Pair Format A Balanced Line Output; Single -10 dBV unbalanced or +4 dBu balanced output; Phono jack and detachable terminal block outputs; Switch selects which pair A, B or C feeds the output; Signal and power pair pass through to loop out jack; UPC 813721016171; Powered locally or remotely through RJ45 jack; Fused local power feeds all modules connected to RJ45; Local power input on terminal block or dc power jack; Blue LED indicates module is powered; Daisy chain with additional format A receivers; Studio quality precision active balanced circuitry; Dimensions 3.00" x 1.60" x 2.09"; Shipping Dimensions 2.00" x 2.00" x 4.00"; Weight 0.41 lbs; Shipping Weight 0.46 lbs

General Information
Manufacturer	RDL
Manufacturer Part Number	TX-TPR1A
Product Name	Series TX Active Single Pair Receiver Twisted Pair Format A Balanced Line Output
UPC Code	813721016171
Overview
The TX-TPR1A is a single pair audio receiving module compatible with RDL Format A twisted pair products. A front panel switch set during installation determines which of the three Format A pairs is buffered to feed the module output The audio signal received from the selected pair of the RJ45 INPUT jack feeds the -10 dBV unbalanced RCA phono jack output and the +4 dBu balanced detachable terminal block output. A studio quality buffer amplifier feeds the outputs at the correct operating level The TX-TPR1A is a single pair receiver, bridging the input signal from the cable pair set on the front panel switch during installation. Because this module receives only one cable pair, a LOOP OUT RJ45 jack is provided for connecting additional Format A receivers Two other single pair receivers may be chained to the LOOP OUT jack, or a single two pair receiver may be connected. In addition to completing the reception of signals from all three Format A pairs, additional receivers may be connected to the same twisted pair feed The bridging input circuits used in all Format A twisted pair receivers allow connection of up to 10 receiver outputs for each cable pair. The possibility of multiple receiver locations adds enormous flexibility in the design of audio routing systems using RDL Format A products The power pair and all three audio pairs are fed through from the INPUT jack to the LOOP OUT jack The TX-TPR1A may be powered directly from a 24 Vdc power supply using either the power jack or the detachable terminal block. Local power connected to the module is also fed to all modules connected to the INPUT and LOOP OUT RJ45 jacks The TX-TPR1A may be remotely powered through the twisted pair cable from any other module, signal distributor or RDL power inserter connected to the same twisted pair cable. Module power is indicated by a front panel LED
Features
Single -10 dBV unbalanced or +4 dBu balanced output Phono jack and detachable terminal block outputs Switch selects which pair A, B or C feeds the output Signal and power pair pass through to loop out jack Powered locally or remotely through RJ45 jack Fused local power feeds all modules connected to RJ45 Local power input on terminal block or dc power jack Blue LED indicates module is powered Daisy chain with additional format A receivers Studio quality precision active balanced circuitry
Pictures
Specifications
Inputs	RDL TP Format A
Input Connection	RJ45
Format A Signal Pair Used	Switch selectable A, B, or C
Format A Output	RJ45 LOOP OUT
Ouputs	150 Ohms Balanced; 1 kOhms Unbalanced
THD+N	Less than 0.005 percent
Frequency Response	10 Hz to 50 kHz (+- 0.1 dB)
Noise below +4 dBu	Less than 90 dB
Headroom above +4 dBu	Greater than 18 dB
Indicator	Power In
CMRR	Greater than 80 dB (50 Hz to 150 Hz)
Power Connections	Power Jack; Detachable Terminal Block; RJ45
Ambient Operating Environment	0C to 50C
Dimensions	3.00" x 1.60" x 2.09"
Shipping Dimensions	2.00" x 2.00" x 4.00"
Weight	0.41 lbs
Shipping Weight	0.46 lbs

A-20170706-1505-210-L

*This item is BRAND NEW - not refurbished. It comes with all manufacturer supplied accessories, and full manufacturer's USA warranty.