RDL TX-TPR3A Active Three Pair Receiver, Twisted Pair Format-A  Balanced line outputs; Three -10 dBV unbalanced or +4 dBu balanced outputs; Phono jack and detachable terminal block outputs; Audio outputs for all three pairs (A, B and C); Utilizes all three format-A pairs; Powered locally or remotely through RJ45 jack; UPC 813721016188; Local power feeds all modules connected to input; Wiring fault protection by automatic resetting fuse; Local power input on terminal block or dc power jack; Blue LED indicates module is powered; Studio quality precision active balanced circuitry;  Dimensions 3.00" x 1.60" x 2.09"; Shipping Dimensions 2.00" x 2.00" x 4.00"; Weight 0.44 lbs; Shipping Weight 0.49 lbs

General Information
Manufacturer	RDL
Manufacturer Part Number	TX-TPR3A
Product Name	Active Three Pair Receiver, Twisted Pair Format-A  Balanced line outputs
UPC Code	813721016188
Overview
The TX-TPR3A is a three pair audio receiving module compatible with RDL Format-A twisted pair products. Three outputs are provided corresponding to the three signal pairs A, B and C The audio signal received on each pair of the RJ45 INPUT jack feeds the corresponding -10 dBV unbalanced RCA phono jack output and the +4 dBu balanced detachable terminal block output. A studio quality buffer amplifier feeds the outputs at the correct operating level The TX-TPR3A features bridging inputs, allowing it to be connected to the LOOP OUT jack of other receivers. The bridging input circuits used in all FORMAT-A twisted pair receivers allow connection of up to 10 receiver outputs for each cable pair The possibility of multiple receiver locations adds enormous flexibility in the design of audio routing systems using RDL FORMAT-A products The TX-TPR3A may be powered directly from a 24 Vdc power supply using either the power jack or the detachable terminal block. Local power connected to the module is also fed to all modules connected to the INPUT RJ45 jack The TX-TPR3A may be remotely powered through the twisted pair cable from any other module, signal distributor or RDL power inserter connected to the same twisted pair cable. Module power is indicated by a front panel LED
Features
Three -10 dBV unbalanced or +4 dBu balanced outputs Phono jack and detachable terminal block outputs Audio outputs for all three pairs (A, B and C) Utilizes all three format-A pairs Powered locally or remotely through RJ45 jack Local power feeds all modules connected to input Wiring fault protection by automatic resetting fuse Local power input on terminal block or dc power jack Blue LED indicates module is powered Studio quality precision active balanced circuitry
Pictures
Specifications
Input	RDL TP Format-A
Input Connection	RJ45
Format-A Signal Pairs Used (3)	A, B, C
Outputs	150 Ohms Balanced (3); 1 kOhms Unbalanced (3)
Output Connection	Detachable Terminal Block (Bal); RCA (Unbal)
Output Level	+4 dBu Bal., +22 dBu Max; -10 dBV Unbal.
Frequency Response	10 Hz to 50 kHz (More or less 0.1 dB)
THD+N	Less than 0.005 percent
Noise below +4 dBu	Less than 90 dB
Crosstalk	Greater than 18 dB
CMRR	Greater than 80 dB (50 Hz to 150 Hz)
Output Power	20 W RMS at 25V
Indicators	Power In
Ambient Operating Environment	0C to 55C
Power Requirement	24 Vdc at 65 mA plus connected loads
Dimensions	3.00" x 1.60" x 2.09"
Shipping Dimensions	2.00" x 2.00" x 4.00"
Weight	0.44 lbs
Shipping Weight	0.49 lbs

A-20170711-1505-210-L

*This item is BRAND NEW - not refurbished. It comes with all manufacturer supplied accessories, and full manufacturer's USA warranty.