|
RGBmate CDA 610A Distribution Amplifier, 1-in,
6-out Composite Video + Stereo Audio DA; Input: Video: (1) Female BNC; Audio:
(1) 5-pin Terminal Block: L+, L-, GND, R+, R-; Output: Video (Loop): (1) Female
BNC (unbuffered); Video (Main): (6) Female BNC; Audio: (6) 5-pin Terminal Blocks:
L+, L-, GND, R+, R-; Compatibility: Composite Video (NTSC, PAL, SECAM); Balanced
or Unbalanced Stereo or Mono Audio.
|
General
Information |
|
Manufacturer |
RGBmate |
|
Manufacturer
Part Number |
CDA 610A |
|
Product
Line |
Distribution Amplifier |
|
Product
Name |
CDA 610A |
|
Marketing Information |
The CDA 610A is a 1-in 6-out composite video
and stereo audio distribution amplifier. This product allows the
connection of a single video + audio source to as many as six display or
recording devices. All video connections are made on female BNC
connectors; all audio connections are made on 5-pin terminal block
connectors.
The video and audio inputs are loop-able, allowing easy expansion by
adding additional distribution amplifiers. The video input offers a loop
output with a 75-ohm termination switch. The audio input offers a 600
ohm/Hi-Z termination switch.
The CDA 610A offers built-in ground loop isolation to help prevent hum
bars and other artifacts caused by ground loops in a system.
Each video and audio output is isolated and amplified. The video
channels are compatible with NTSC, PAL, and SECAM. The audio channels
can pass balanced or unbalanced signals. If the input is unbalanced, any
of the outputs can be unbalanced or balanced.
The CDA 610A is rack-mountable in a 1U high, 1/2-rack space using
optional hardware. |
|
Features |
- Composite Video (NTSC, PAL, SECAM)
- Built-in Ground Loop Isolation
- Stereo or Mono audio (balanced or unbalanced)
- Loop-able Video & Audio
- Inputs (w/Termination Switches)
- Individually isolated and amplified outputs
- Complies with CE & FCC Class A
|
|
Pictures |
 |
|
Specifications |
|
General |
Input
Video: (1) Female BNC
Audio: (1) 5-pin Terminal Block: L+, L-, GND, R+, R-
Output
Video (Loop): (1) Female BNC (unbuffered)
Video (Main): (6) Female BNC
Audio: (6) 5-pin Terminal Blocks: L+, L-, GND, R+, R-
Compatibility: Composite Video (NTSC, PAL, SECAM); Balanced or
Unbalanced Stereo or Mono Audio |
|
Mechanical |
Width: 8.50 in. (216 mm)
Height: 1.75 in (44 mm)
Depth: 4.73 in (121 mm)
Weigh: 2.0 lb (0.91 kg)
Material: 0.1" Al
Temperature (Operating): 10°C-35°C
Temperature (Maximum): 50°C
Humidity: 90% non-condensing
MTBF (calc.): 40,000 hours |
|
Electrical |
Input Video Signal
Analog: 1.7V Max
Impedance: 75 Ohms +/- 1% (Terminated) or 10 kOhms (Unterminated)
Isolation: Differential, Rejects Common Mode 50/60 Hz
Input Video Signal
Analog: 1.7V p-p Max (Terminated) Impedance: 75 ohms +/- 1%
Gain: 0 dB
Audio Input
Impedance: 600 Ohms (Terminated), 10k Ohms (Unterminated), Balanced or
Unbalanced
Level: 20 dBu Balanced or Unbalanced
Audio Throughput
Gain: +6 dB balanced, 0 dB unbalanced
Frequency Response: 10 Hz to 20 kHz (+/- 0.05dB)
Noise Floor: -100 dB @ 20 kHz
Stereo Channel Separation: >100 dB @20 kHz
CMRR: >80 dB, 10 Hz to 20 kHz
Audio Output
Impedance: 50 Ohms unbalanced, 100 Ohms balanced
Drive (with Hi-Z Input): > 20 dBu, balanced or unbalanced
Drive (with 600 Ohm Input): >10 dBu, balanced or unbalanced
Frequency Response
Bandwidth: 85 MHz @ -3dB
Flatness: 0.1 dB to 30 MHz
Coupling: DC
Power: 90-240 volts
Power Consumption: 10 watts max |
A-20060317-1369-116-E
*This item is BRAND NEW -
not refurbished. It comes with all manufacturer supplied accessories, and full
manufacturer's USA warranty. |
