|
|
Ricoma RCM-1201C-W Embroidery Machine with Bigger Sewing Field of 500x450mm,
12 needles, one head, suitable for flat bed embroidery, cap embroidery and
finished garments embroidery, Automatic thread trimmer, Maximum speed 1000 SPM,
270° wide cap frame unit, 5" color LCD display showing real time stitching,
Built-in 3.5" floppy reader, USB port ready, Auto color change, Thread break
detection, Pre-Sew Design Trace capable, Memory size: 1,000,000 stitches
General Information |
Manufacturer |
Ricoma |
Manufacturer Part Number |
RCM-1201C-W
|
Product Line |
Embroidery Machine with Bigger Sewing Field of 500x450mm |
Features |
- 12 needles, one head, suitable for flat bed embroidery, cap
embroidery and finished garments embroidery
- Embroidery area: 400 x 450 mm, or 15.7" x 17.7"
- Automatic thread trimmer
- Maximum speed 1000 SPM
- 270° wide cap frame unit
- 5" color LCD display showing real time stitching
- Built-in 3.5" floppy reader
- USB port ready
- Auto color change
- Thread break detection
- Pre-Sew Design Trace capable
- Memory size: 1,000,000 stitches
- Electricity: 110V/60Hz or 220V/50Hz available
- Start, Stop, and Emergency Stop
- On-board lettering
- Head(s): 1
- Net Weight: 290 kgs. / 638 lbs.
- E.M.R. Area: 400 x 450 mm (15.7 x 17.7 in.)
- Machine Size: 100 x 80 x 140 cm (40 x 32 x 55 in.
Full Color Control Panel Included
- 5" High Definition color LCD display showing real time stitching
- Function keys including Menu, SPeed up and Slow down (also Page
Up and Page Down), Help, Floppy Input, Parameter Settings, Clear,
ESC, Enter, etc.
- Numeric keys for selection of needles
- Frame-moving keys
- Manual Trimming
- Manual Color Change
- Embroidery Status
- Embroidery Method
- Dot Key to return to 100 degrees
Frames / Hoops Included
- 1 Sash Frame: 40.5cm x 48cm (16" x 19") for single head, 81cm x
48cm (32" x 19") for 2 head
- 2 sets of back hoops for 30cm x 30cm (11.80" x 11.80") for each
head
- 2 sets of front hoops of 19cm (7.50") for each head
- 2 sets of front hoops of 15cm (5.90") for each head
- 2 sets of front hoops of 12cm (4.70") for each head
- 2 sets of front hoops of 9cm (3.50") for each head
Cap Attachment Included
270° Wide Cap Driver, 1 set
Cap Frames, 2 sets
Snap in and Snap out Cap Change Device, 1 set
Accessories Included
- Table top
- Operation Manual
- Tool Kit
- Bobbin Winder
Options (Not Included)
- Introductory Starter Kit
- 8000 plus pre-digitized stock designs
- Digital Image Stitch Creator (D.I.S.C.) digitizing software,
Gold or Platinum
- Shirt Hooping Station
- Full Size Thread Cones
|
A-20071003-1248-130-E
*This
item is BRAND NEW - not refurbished. It comes with all manufacturer supplied
accessories, and full manufacturer's USA warranty.
|