Samlex SEC-1230UL Automatic Switch Mode
Commercial Grade Battery Charger, 12 Volt, 30 Amp; Safety Listed; Advanced fully
automatic three-stage 30 Amp battery charger is ideal for charging all types of
12 Volt lead-acid batteries: Flooded, Absorbed Glass Mat (AGM) & Gel Cell, from
a 120V 60Hz or 230V 50Hz AC source; By means of a DIP switch setting, conversion
to a two-stage algorithm is possible to charge batteries connected to a DC load
DC UPS; The unit can also be used as a DC Power Supply; UPC Universal Protection
Circuit: Overload, short-circuit, Reverse battery polarity and over-temperature
protection; The unit allows charging of up to 3 separate batteries, no isolator
necessary; Switch mode technology for high efficiency, lightweight and quiet
operation; User Configurable AC Input voltage 120 or 230 VAC,50 / 60 Hz; User
Selectable by DIP Switch for 2 or 3 stage, rapid and safe charging of
stand-alone and loaded Lead Acid Batteries; Ammeter & LED power status
indicator; Fan cooled based on output current; Safety certified and listed to UL
Standard UL-1564; Certified to CAN/CSA STD C22.2 No. 107.2; EMI Compliant to FCC
Part 15(B), Class B; Industry Proven Design; Charge with a battery load or stand
alone; Nominal Input Voltage (pre-set) 120 VAC, 60 Hz, 6.5A; Internal Jumper
Change 230 VAC, 50 Hz; Input Frequency 50 / 60 Hz; Output Voltage, Boost 1,2 14
VDC, or 14.4 VDC or disabled; Output Voltage, Float1 13.5 VDC; Output Amps 30A;
Operating Temperature Range 0 - 40°C / 32˚F - 104˚F; Unit Weight 6.4 pouds; Unit
Dimensions 10.8 x 8.4 x 3.3 inches
General Information |
Manufacturer |
Samlex |
Manufacturer Part Number |
SEC-1230UL |
Product Name |
Automatic Switch Mode Commercial Grade
Battery Charger, 12 Volt, 30 Amp |
Overview |
This advanced fully automatic three-stage
30 Amp battery charger is ideal for charging all types of 12 Volt
lead-acid batteries ( Flooded / Absorbed Glass Mat (AGM) / Gel Cell)
from a 120 V, 60 Hz or 230 V, 50 Hz AC source. By means of a DIP switch
setting, conversion to a two-stage algorithm is possible to charge
batteries connected to a DC load (DC UPS). The unit can also be used as
a DC Power Supply. Features include overload, short-circuit and
over-temperature protection. The unit allows charging of up-to 3
separate battery banks. |
Features |
- Switch mode technology for high
efficiency, lightweight and quiet operation
- Automatic operation for ALL Lead
Acid Batteries Flooded, AGM or Gel Cell
- Can charge 3 banks of batteries
simultaneously, no isolator necessary
- Can be used as a power supply or
DC UPS when used in conjunction with a battery
- User Configurable AC Input voltage
120 or 230 VAC, 50 / 60 Hz
- User Selectable ( by DIP Switch)
Selectable for 2 or 3 stage, rapid and safe charging of stand-alone
and loaded Lead Acid Batteries
- Protections: Short circuit,
overload, reverse battery polarity
- Fan cooled based on output current
- Safety certified and listed to UL
Standard UL-1564
- EMI Compliant to FCC Part 15(B),
Class B
- High efficiency
- Commercial Grade
- Lightweight
- Quiet operation
- Industry Proven Design – 1000s of
units in operation
- 2 or 3 stage charging (user
selectable)
- Voltage meter display – Ammeter
and LED power status
- For all types of Lead Acid
batteries
- Charge with a battery load or
stand alone
- Use as a power supply or DC UPS
|
Features |
Input |
120 VAC 60 Hz or 230 VAC 50 Hz |
Output |
12 VDC |
Amps |
30 Amps |
Operating Temperature Range |
0 - 40°C / 32˚F - 104˚F |
Output Banks
|
3 |
Protections |
Short Circuit, Over Current, Over
Temperature, Reverse Battery Polarity |
Dimensions |
10.5 x 8.5 x 3 (in)
26.7 x 21.6 x 7.6 (cm) |
Weight |
7 (lbs)
3.17 (kg) |
Safety |
Listed to UL Standard UL-1564, EMI
Compliant to FCC Part 15(B), Class B
|
A-20150824-1687-130-E
*This item is BRAND NEW -
not refurbished. It comes with all manufacturer supplied accessories, and full
manufacturer's USA warranty.
|