|
Saniflow M03ACS Mediflow Basic Automatic Hand
Dryer, Stainless steel AISI 304 cover, 1/16" thick, Satin finish; Voltage: 110 -
120 V; Power consumption: 19 A; Motor: 1/3 HP; Nominal power: 2.250 W; R.P.M.:
4.500; Heating element: 2.000 W; Effective airflow: 265 CFM; Free airflow: 318
CFM; Noise level at 79'': 65 dB; Air speed: 5.195 LFM; Temperature (at 4''
distance / 70ºF): 120 ºF; Insulation: Grounding required; Frequency: 50/60 Hz;
Drying time: 29"; Mounting: Surface or Recessed.
Watch Saniflow Video
|
General
Information |
|
Manufacturer |
Saniflow |
|
Manufacturer
Part Number |
M03AC |
|
Product
Line |
Hand Dryer |
|
Product
Name |
M03AC |
|
Marketing Information |
|
Surface mounted vandal resistant hand dryer
shall be fabricated with one-piece 1/16” thick stainless steel cover,
satin finish. The back base shall be fire resistant plastic Noryl V0 and
with 4 holes for wall mounting. The dryer shall be activated through an
infrared electronic sensor and shall automatically turn off when hands
are removed. Sensor shall have a polycarbonate viewing window. Motor
shall be 1/3 hp, 4.500 r.p.m. , universal type, class A including a
temperature limiter switch off at 248 ºF (120ºC. ) . The Fe, Al & Cr
heating element should incorporate a thermal limiter, which will switch
off by a temperature of 230 ºF (110ºC.). The hand dryer should have an
aluminum asymmetrical double inlet fan wheel, and the fan scroll shall
be made of a fire resistant plastic Noryl VO. Dryer shall deliver 318
CFM of air at 120 ºF (49 ºC) and 5,195 LFM velocity during user
controlled drying cycle. The dryer shall have a total power of 2,250
Watts with a consumption of 19A. Noise level should be 65 dB. Overall
dimensions shall be 10-3/4”W x 12-7/8”H x 6-1/2”D. Unit shall be UL
listed, and /or VDE approved and CE marked. |
|
Features |
|
General Description |
Warm air hand dryer.
Sensor operated by hand approximation.
Maximum power and airflow.
Maximum robustness and vandal-proof.
Suitable for very high traffic facilities.
Also in recessed version conform to ADA projection requirements.
It normally goes along with a soap dispenser. |
|
Components & Materials |
Stainless steel AISI 304 one-piece cover
satin finish, 1/16” (1.5 mm) thick. Cover fixed to the base by means of
2 vandal-proof lock screws and lock with special mediflow ® key wrench.
Fire resistant plastic PPE+HIPS base and fan scroll, with 4 Ø 5/16” (8
mm) holes for wall mounting. It includes silent-blocks to dampen
mechanical vibrations.
Motor, universal with brushes, 4,500 rpm, A class, includes a
temperature limiter.
Aluminum asymmetrical double inlet fan wheel.
Fe, Al & Cr taped winding coil filament heating element that
incorporates a temperature limiter.
IR electronic detection sensor with polycarbonate viewing window. |
|
Operation |
Place the hands under the air outflow valve.
The dryer will start automatically, and go on with no interruption as
long as the hands are kept in the detection range of the sensor. As a
safety measure, the appliance will stop after 120 seconds. |
|
Certificates |
UL comply with UL499 norm. |
|
Specifications |
- Voltage: 110 - 120 V
- Power consumption: 19 A
- Motor: 1/3 HP
- Nominal power: 2.250 W
- R.P.M.: 4.500
- Heating element: 2.000 W
- Effective airflow: 265 CFM
- Free airflow: 318 CFM
- Noise level at 79'': 65 dB
- Air speed: 5.195 LFM
- Temperature (at 4'' distance / 70ºF):
120 ºF
- Insulation: Grounding required
- Frequency: 50/60 Hz
- Drying time: 29"
- Mounting: Surface or Recessed
- Size: 10-3/4"W x 12-7/8"H x 6-1/2"D
- Weight: 9.37 Lbs
|
A-20060628-1405-116-E
*This item is BRAND NEW -
not refurbished. It comes with all manufacturer supplied accessories, and full
manufacturer's USA warranty.
|
