|
Saniflow M02A Mediflow LogicDry Automatic Hand
Dryer, Metal sheet cover, 5/64" thick, White epoxy enamelled; Voltage: 110 - 120
V; Power consumption: 2.1 A - 19 A; Motor: 1/3 HP; Nominal power: 250 W - 2.250
W; R.P.M.: 4.500; Heating element: 0 W - 2.000 W; Effective airflow: 265 CFM;
Free airflow: 318 CFM; Noise level at 79'': 65 dB; Air speed: 5.195 LFM;
Temperature (at 4'' distance / 70ºF): 120 ºF; Insulation: Grounding required;
Frequency: 50/60 Hz; Drying time: 29"; Mounting: Surface or Recessed.
Watch Saniflow Video
|
General
Information |
|
Manufacturer |
Saniflow |
|
Manufacturer
Part Number |
M02A |
|
Product
Line |
Hand Dryer |
|
Product
Name |
M02A |
|
Marketing Information |
|
Surface mounted vandal resistant hand dryer
shall be fabricated with one-piece 5/64” thick metal sheet cover, white
epoxy coated. The back base shall be fire resistant plastic Noryl V0 and
with 4 holes for wall mounting. The dryer shall be activated through an
infrared electronic sensor and shall automatically turn off when hands
are removed. Sensor shall automatically shut dryer off approximately 120
seconds after dryer turn on if inanimate object is placed. Sensor shall
have a polycarbonate viewing window. Motor shall be 1/3 hp, 4,500 r.p.m.
, universal type, class A including a temperature limiter which switch
off at 248 ºF (120ºC. ) . The hand dryer shall have an auto-adjustable
heating element with 4 heating levels: 0 –800 – 1,200 – 2,000 Watts
which permit the automatic regulation of the air temperature according
to the room temperature. The Fe, Al & Cr taped winding coil filament
heating element should incorporate a thermal limiter, which will switch
off by a temperature of 230 ºF (110ºC.). The heating element shall have
an automatic disconnection ½ second before motor stop. The hand dryer
should have an asymmetrical double inlet fan wheel, and the fan scroll
shall be made of a fire resistant plastic Noryl VO. Dryer shall deliver
318 CFM of air at 120 ºF (49 ºC) and 5,195 LFM velocity during user
controlled drying cycle. The dryer shall have a total power of from 250
to 2,250 Watts with consumption from 2,1 to 19A. Noise level should be
65 dB. Overall dimensions shall be 10-3/4”W x 12-5/8”H x 6-1/2”D. Unit
shall be UL listed, and /or VDE approved and CE marked. |
|
Features |
|
General Description |
Warm air hand dryer.
Sensor operated by hand approximation.
Airflow temperature electronic regulation.
Maximum power and airflow.
Maximum robustness and vandal-proof.
Suitable for very high traffic facilities.
Also in recessed version conform to ADA projection requirements.
It normally goes along with a soap dispenser. |
|
Components & Materials |
Metal sheet one-piece cover with white epoxy
coated, 5/64” (1.9 mm) thick. Cover fixed to the base by means of 2
vandal-proof lock screws and lock with special mediflow ® key wrench.
Fire resistant plastic Noryl V0 base and fan scroll, with 4 Ø 5/16” (8
mm) holes for wall mounting. It includes silent-blocks to dampen
mechanical vibrations.
Motor, universal with brushes, 4,500 rpm, A class, includes a safety
thermostat.
Aluminum asymmetrical double inlet fan wheel.
Fe, Al & Cr taped winding coil filament resistor that incorporates a
safety thermostat. · Automatic disconnection ½ second before motor stop.
Automatic regulation of air temperature on ambient temperature.
Adjustable (2”-8”) IR electronic detection sensor with polycarbonate
viewing window.
Selective detection of fixed targets and automatic disconnection system
after 120 seconds of continuous use. |
|
Operation |
Place the hands under the air outflow valve.
The dryer will start automatically, and go on with no interruption as
long as the hands are kept in the detection range of the sensor. As a
safety measure, the appliance will stop after 120 seconds. |
|
Certificates |
UL comply with UL499 norm. |
|
Specifications |
- Voltage: 110 - 120 V
- Power consumption: 2.1 A - 19 A
- Motor: 1/3 HP
- Nominal power: 250 W - 2.250 W
- R.P.M.: 4.500
- Heating element: 0 W - 2.000 W
- Effective airflow: 265 CFM
- Free airflow: 318 CFM
- Noise level at 79'': 65 dB
- Air speed: 5.195 LFM
- Temperature (at 4'' distance / 70ºF):
120 ºF
- Insulation: Grounding required
- Frequency: 50/60 Hz
- Drying time: 29"
- Mounting: Surface or Recessed
- Size: 10-3/4"W x 12-5/8"H x 6-1/2"D
- Weight: 10.7 Lbs
|
A-20060629-1405-116-E
*This item is BRAND NEW -
not refurbished. It comes with all manufacturer supplied accessories, and full
manufacturer's USA warranty.
|
