|
Saniflow M02ACS Mediflow LogicDry Automatic Hand
Dryer, Stainless steel AISI 304 cover, 1/16" thick, 265 CFM Effective airflow,
318 CFM Free airflow, Noise level at 79'': 65 dB, 5.195 LFM Air speed, Automatic
regulation of air temperature on ambient temperature, Motor, universal with
brushes, 4,500 rpm, A class, includes a safety thermostat, Adjustable (2”-8”) IR
electronic detection sensor with polycarbonate viewing window, Selective
detection of fixed targets and automatic disconnection system after 120 seconds
of continuous use
Watch Saniflow Video
|
General Information |
|
Manufacturer |
Saniflow |
|
Manufacturer Part Number |
M02ACS |
|
Product Name |
Mediflow LogicDry Automatic Hand Dryer |
|
Marketing Information |
|
Surface mounted vandal resistant hand
dryer shall be fabricated with one-piece 1/16” thick stainless steel
AISI 304 cover, satin finish. The back base shall be fire resistant
plastic Noryl V0 and with 4 holes for wall mounting. The dryer shall be
activated through an infrared electronic sensor and shall automatically
turn off when hands are removed. Sensor shall automatically shut dryer
off approximately 120 seconds after dryer turn on if inanimate object is
placed. Sensor shall have a polycarbonate viewing window. Motor shall be
1/3 hp, 4,500 r.p.m., universal type, class A including a temperature
limiter which switch off at 248 ºF (120ºC). The hand dryer shall have an
auto-adjustable heating element with 4 heating levels: 0 –800 – 1,200 –
2,000 Watts which permit the automatic regulation of the air temperature
according to the room temperature. The Fe, Al & Cr taped winding coil
filament heating element should incorporate a thermal limiter, which
will switch off by a temperature of 230 ºF (110ºC). The heating element
shall have an automatic disconnection ½ second before motor stop. The
hand dryer should have an asymmetrical double inlet fan wheel, and the
fan scroll shall be made of a fire resistant plastic Noryl VO. Dryer
shall deliver 318 CFM of air at 120 ºF (49 ºC) and 5,195 LFM velocity
during user controlled drying cycle. The dryer shall have a total power
of from 250 to 2,250 Watts with a consumption from 2,1 to 19A. Noise
level should be 65 dB. Overall dimensions shall be 10-3/4”W x 12-7/8”H x
6-1/2”D. Unit shall be UL listed, and /or VDE approved and CE marked. |
|
Features |
General
- Warm air hand dryer.
- Sensor operated by hand
approximation.
- Airflow temperature electronic
regulation.
- Maximum power and airflow.
- Maximum robustness and
vandal-proof.
- Suitable for very high traffic
facilities.
- Also in recessed version conform
to ADA projection requirements.
- It normally goes along with a soap
dispenser.
Components & Materials
- Stainless steel AISI 304 one-piece
cover satin finish, 1/16” (1.5 mm) thick. Cover fixed to the base by
means of 2 vandal-proof lock screws and lock with special mediflow
key wrench.
- Fire resistant plastic Noryl V0
base and fan scroll, with 4 Ø 5/16” (8 mm) holes for wall mounting.
It includes silent-blocks to dampen mechanical vibrations.
- Motor, universal with brushes,
4,500 rpm, A class, includes a safety thermostat.
- Aluminum asymmetrical double inlet
fan wheel.
- Fe, Al & Cr taped winding coil
filament resistor that incorporates a safety thermostat. · Automatic
disconnection ½ second before motor stop.
- Automatic regulation of air
temperature on ambient temperature.
- Adjustable (2”-8”) IR electronic
detection sensor with polycarbonate viewing window.
- Selective detection of fixed
targets and automatic disconnection system after 120 seconds of
continuous use.
Operation
- Place the hands under the air
outflow valve. The dryer will start automatically, and go on with no
interruption as long as the hands are kept in the detection range of
the sensor. As a safety measure, the appliance will stop after 120
seconds.
Certificates
- UL comply with UL499 norm.
|
|
Specifications |
- Voltage: 110 - 120 V
- Power consumption: 2.1 A - 19 A
- Motor: 1/3 HP
- Nominal power: 250 W - 2.250 W
- R.P.M.: 4.500
- Heating element: 0 W - 2.000 W
- Effective airflow: 265 CFM
- Free airflow: 318 CFM
- Noise level at 79'': 65 dB
- Air speed: 5.195 LFM
- Temperature (at 4'' distance /
70ºF): 120 ºF
- Insulation: Grounding required
- Frequency: 50/60 Hz
- Drying time: 29"
- Mounting: Surface or Recessed
- Size: 10-3/4"W x 12-7/8"H x
6-1/2"D
- Weight: 9.37 Lbs
|
A-20060629-1405-116-E
M-20060727-1405-110-E
*This item is BRAND NEW -
not refurbished. It comes with all manufacturer supplied accessories, and full
manufacturer's USA warranty.
|
