|
Sherwood RD-606I Network
Audio/Video Receiver with HDMI 1.4, 5.1 Channel,
100W x 5 (1kHz, THD 0.1%)@6Ω/Only Channel, 192kHz/24Bit D/A Converter (All
channels), DTS, DTS96/24, Dolby Digital, Dolby Prologicll, DLNA/UPnP/Internet
Radio/Audio Streaming, One Touch Automatic Speaker Setup, USB Host (front), NTSC
Video format, UPC 093279845243, Front Analog Input 2 (AUX1/2) mini stereo + BT
(USA) or V3 (others), iPod Connectivity
with Sherwood DS-10, 120V 60Hz / 230V 50Hz
|
General Information |
|
Manufacturer |
Sherwood
|
|
Manufacturer Part
Number |
RD-606I |
|
Product Name |
Network Audio/Video
Receiver with HDMI 1.4 |
|
UPC Code |
0
93279 84524 3 |
|
Features |
- 100W x 5(1kHz, THD 0.1%)@6Ω/Only
Channel
- 192kHz /24Bit D/A Converter (All
channels)
- DTS, DTS96/24, Dolby Digital,
Dolby Prologic ll
- DLNA / UPnP / Internet Radio /
Audio Streaming
- One Touch Automatic Speaker Setup
- USB Host (front)
- iPod Connectivity with Sherwood
DS-10 (Sold separately)
|
|
Specifications |
|
AMPLIFIER SECTION |
|
Power output, stereo mode, 6 Ω, THD 0.7%,
40 Hz~20 kHz |
2x100 W |
|
Total harmonic distortion, 6 Ω, 100 W, 1
kHz |
0.05 % |
|
Intermodulation distortion |
60 Hz : 7 kHz= 4 : 1 SMPTE, 6 Ω, 100 W |
0.1 % |
|
Input sensitivity, 47 kΩ Line (CD, TAPE,
VIDEO) |
250 mV |
|
Signal to noise ratio, IHF “A” weighted
Line (CD, TAPE, VIDEO) |
95 dB |
|
Frequency response Line (CD, TAPE, VIDEO),
20 Hz~50 kHz |
+0 dB, -3 dB |
|
Output level |
TAPE REC, 2.2 kΩ | 250 mV
PRE OUT (Subwoofer), 1 kΩ | 1.5 V |
|
Bass/Treble control, 100 Hz/10 kHz |
±10 dB |
|
Surround mode, only channel driven |
Front power output, 6 Ω, 1 kHz, THD 0.7 %
| 100 W / 100 W
Center power output, 6 Ω, 1 kHz, THD 0.7 % | 100 W
Surround power output, 6 Ω, 1 kHz, THD 0.7 % | 100 W / 100 W |
|
DIGITAL AUDIO SECTION |
|
Sampling frequency |
32, 44.1, 48, 96 kHz |
|
Digital input level |
Coaxial, 75 Ω | 0.5 Vp-p
Optical, 660 nm | -15~-21 dBm |
|
VIDEO SECTION |
|
Video format |
NTSC |
|
Input sensitivity (=Output level), 75 Ω |
Video (Composite (normal)) | 1 Vp-p |
|
HDMI connector |
19 pin |
|
FM TUNER SECTION |
|
Tuning frequency range |
87.5~108 MHz |
|
Usable sensitivity, THD 3%, S/N 30 dB
|
12.8 dBf |
|
50 dB quieting sensitivity, mono/stereo
|
20.2 / 45.3 dBf |
|
Signal to noise ratio, 65 dBf, mono/stereo |
55 / 50 dB |
|
Total harmonic distortion, 65 dBf,1 kHz,
mono/stereo |
0.5 / 1.0 % |
|
Frequency response, 30 Hz~12 kHz |
±3.0 dB |
|
Stereo separation, 1 kHz |
30 dB |
|
Capture ratio |
4 dB |
|
IF rejection ratio |
80 dB |
|
AM TUNER SECTION |
|
Tuning frequency range |
520~1710 kHz |
|
Usable sensitivity |
500 μV/m |
|
Signal to noise ratio |
40 dB |
|
Selectivity
|
25 dB |
|
GENERAL |
|
Power supply |
120V 60Hz / 230V 50Hz |
|
Power consumption |
2.3 A |
|
Dimensions (WxHxD, including protruding
parts) |
435x143x359 mm (17-3/8x5-5/8x14-1/8
inches) |
|
Weight (Net) |
8.9 kg (19.6 lbs) |
A-20120927-1103-130-L
M-20180419-1103-231-L
*This item is BRAND NEW -
not refurbished. It comes with all manufacturer supplied accessories, and full
manufacturer's USA warranty.
|
