|
Sony HDW-F500 High Definition Digital Recording,
HDCAM Studio VTR with 24P and 60i compatibility; Power requirements 100 to 240 V
AC (±10 %, 50/60 Hz), Power consumption 230W, Operating temperature + 5 °C to
+40 °C (+41 °F to +104 °F), Storage temperature -20 °C to +60 °C (-4 °F to +140
°F), Operating humidity 25 % to 80 % (Relative humidity), Tape speed 77.4 mm/s
(24P mode), Digital recording/Playback time Max. 155 min with BCT-124HDL
cassette (24P mode).
|
General
Information |
|
Manufacturer |
Sony |
|
Manufacturer
Part Number |
HDW-F500 |
|
Product
Line |
HDCAM |
|
Product
Name |
HDW-F500 |
|
Marketing
Information |
|
High-Definition editing recorder utilizing
HDCAM compression. The switchable frame rate allows recordings to be
made at 23.98, 24, 25, 29.97and 30 frames per second progressive, and
50, 59.94 or 60 fields per second interlace. Audio capabilities include
(4) 20-bit channels, capable of handling Dolby "E" encoded audio tracks. |
|
Features |
- Video and audio pre-read Video and audio pre-read:
Enables the efficient use of VTRs in any production environment;
incorporates this feature as standard through the use of a set of pre-read
heads.
- Increased recording time with 24P Increased
recording time with 24P: An important consideration with 24P recording
is the increased record time on the same HDCAM cassette; a typical HDCAM
cassette holds 124 minutes of 60 Hz HD material, but can hold 155
minutes of 24P HD material.
- HD-SDI Provides an uncompressed, 10-bit,
digital component SMPTE-292M HD serial data stream with a bit rate of
1.5Gbps.
|
|
Specifications |
|
General |
Power requirements
Power consumption
Operating temperature
Storage temperature
Operating humidity
Mass (Approx.)
Dimensions (W x H x D)
Tape speed
Digital recording/Playback time
Fast forward/rewind time
Search speed range
Servo lock time
Load/unload time |
100 to 240 V AC (±10 %, 50/60 Hz)
230 W
+ 5 °C to +40 °C (+41 °F to +104 °F)
-20 °C to +60 °C (-4 °F to +140 °F)
25 % to 80 % (Relative humidity)
35 kg (77 lb. 2 oz)
427 x 237 x 520 mm (16 3/4 x 9 3/8 x 20 1/2 inches)
77.4 mm/s (24P mode)
Max. 155 min with BCT-124HDL cassette (24P mode)
Approx. 3 min with BCT-124HDL cassette
±60 times normal playback speed (24P mode)
1.0 sec or less (From standby on)
6.0 sec or less |
|
|
Input/output |
HD serial
V/A input
HD reference video input
SD reference video input
Digital audio input (CH1/2, CH3/4)
Analog audio input (CH1/2/3/4/Cue)
Time code input
HD serial V/A output
Pull-down output (Optional BKDV-507 required)
Standard Definition V/A output
(Optional BKDV-501A required)
Analog I/O down converted output
(Optional BKDV-501A required)
Analog I/O reference output
Digital audio output (CH1/2 CH3/4)
Analog audio output (CH1/2/3/4/Cue)
Monitor output (L/R)
Time code output
Phones
HD SDTI input/output
Remote 1 input
Remote 1 output
RS-232C
Video control
Parallel remote (Optional BKDW-509 required)
Panel remote |
BNC (x1 with a
monitoring loop-through), Serial digital (1.485 Gb/s), SMPTE 292M/BTA
S-004/ITU-R.BT 709
BNC (x1, with a loop-through), Tri Level sync, 0.6 Vp-p, 75 ½, sync
negative
BNC (x1, with a loop-through), Black Burst, 0.286 Vp-p, 75 ½, sync
negative
BNC (x2, with 2 loop-through), AES/EBU
XLR-5-pin type (Male)
Low OFF: -60 dBu, high impedance, balanced
High OFF: +4 dBu, high impedance, balanced
High ON: +4 dBm, 600 ½ termination, balanced
XLR-3-pin type, (Male x1), 0.5 to 18 Vp-p, 10 k½, balanced
BNC (x4, with a character out), Serial digital (1.485 Gb/s), SMPTE
292M/BTA S004/ITU-R.BT 709
BNC (x2), with character
BNC (x3, with a character out), D1 serial digital (270 Mb/s), SMPTE
259M
Composite: BNC (x1 with a
character out) 1.0 Vp-p, 75 ½, sync negative)
SD sync: BNC (x1, Black Burst, 0.286 Vp-p, 75 ½, sync negative)
1125 Sync: BNC (x2), Tri Level sync, 0.6 Vp-p, 75 ½, sync negative
BNC (x2), AES/EBU, unbalanced
XLR-3-pin type, (Female x5), +4 dBm, (With a 600 ½ load), low
impedance, balanced
XLR-3-pin type, (Female x2), +4 dBm, (With a 600 ½ load), low
impedance, balanced
XLR-3-pin type, (Female x1), 2.2 Vp-p low impedance, balanced
JM-60 stereo phone jack, - ° to Ð12 dBu (With an 8 ½ load),
unbalanced
BNC (x2), Input/output, Serial digital
D-sub 9-pin, Female, Sony 9-pin remote interface
D-sub 9-pin, Female, Sony 9-pin remote interface
D-sub 25-pin, Female
D-sub 9-pin, Female (For optional HKDV-503)
D-sub 50-pin, Female
D-sub 15-pin, Female |
|
|
Digital video performance |
Sampling frequency
Quantization
Compression
Channel coding
Error correction
Error concealment |
Y: 74.25 MHz, PB/PR: 37.125 MHz
10 bits/sample of input-output signals (8 bit sample for internal
compression process)
Coefficient recording system
S-NRZI PR-IV
Reed-Solomon code
Adaptive three dimensional |
|
|
Digital audio performance |
Sampling frequency
Quantization
Wow & flutter
Headroom
Emphasis |
48 kHz (Synchronized with video)
20 bits/sample
Below measurable level
20 dB (Or 18 dB selectable)
T1 = 50 µs, T2 = 15 µs (on/off selectable in recording mode) |
|
|
Analog audio output performance |
A/D quantization
D/A quantization
Frequency response
Dynamic range
Distortion
Cross talk |
20 bits/sample
20 bits/sample
20 Hz to 20 kHz, +0.5 dB/-1.0 dB (0 dB at 1 kHz)
More than 95 dB (At 1 kHz emphasis ON)
Less than 0.05 % (At 1 kHz, emphasis ON, reference level)
Less than Ð90 dB (At 1 kHz, between any two channels) |
|
|
Cue truck |
Frequency response
S/N ratio
Distortion
Wow & flutter |
90 Hz to 12 kHz ± 3 dB
More than 45 dB (At 3 % distortion level)
Less than 2 % (T.H.D at 1 kHz, reference level)
Less than 0.2 % rms |
|
A-20051115-1233-116-E
M-20080418-1233-107-E
*This item is BRAND NEW -
not refurbished. It comes with all manufacturer supplied accessories, and full
manufacturer's USA warranty.
|
