Sony SNC-RZ30N Network Color Camera, 1/6" type
Interline Transfer Super HAD CCD Imager, 680000 pixels, Horizontal resolution
480 TV lines, Electronic shutter 1/4 to 1/10,000 sec., 25x optical zoom, 300x
with digital zoom, Horizontal viewing angle 2.0 degrees to 45 degrees, Focal
length f = 2.4 mm to 60 mm, UPC 027242613522, NTSC Signal system, Internal Sync
system, S/N ratio 48 dB, Pan angle -170 to +170 degrees, Pan speed 2 sec./340
degrees, Tilt angle -90 to +25 degrees, Tilt speed 1.5 sec./115 degrees, Remote
Monitoring/Control Over Networks Using a Standard Web Browser, High-Speed, Quiet
Pan/Tilt/Zoom (PTZ), Image Transfer Using FTP/SMTP
General Information |
Manufacturer |
Sony |
Manufacturer Part Number |
SNC-RZ30N |
Product Name |
Network Color Camera |
UPC Code |
027242613522 |
Overview |
Combining network functionality with a
Pan/Tilt/Zoom (PTZ) capability, the SNC-RZ30N takes remote monitoring
and general IT applications to the next step by offering the flexibility
to see almost
anything within the camera's range and field-of-view over an ordinary
TCP/IP network. Images from the SNC-RZ30N can be viewed and the PTZ
movement can be controlled using a PC running a standard browser without
the need for additional software or plug-ins. Moreover, setup is very
easy because the setup menu is also browser-based.
The SNC-RZ30N features a 25x optical zoom capability that allows a user
to zoom in on small or distant objects with exceptional clarity. Image
quality is extremely high because the SNC-RZ30N uses
a high-resolution CCD imager and a newly designed image processor. The
SNC-RZ30N employs JPEG compression and can be set up to transfer these
JPEG images to an FTP server or to a specified e-mail address. Also, the
frame rate for this camera can be set as high as 30 fps, which makes for
very smooth moving images. The SNC-RZ30N features built-in PCMCIA card
slots to further expand the camera's memory with a flash ATA card, an
ATA HDD card, or a Memory StickTM media card with adaptor, allowing you
to store tens of thousands of images.
Finally, unlike most network cameras, the SNC-RZ30N has an analog
composite video output connector for outputting video to a local
recorder, making it ideal for reviewing activity that might have been
missed while monitoring in real time.
All of this functionality is packaged into one sleek, compact, and
lightweight body that can be either ceiling mounted or placed on a flat
surface. The feature rich SNC-RZ30N is an ideal chioce for
virtually any IP remote monitoring application. |
Features |
- Remote Monitoring/Control Over
Networks Using a Standard Web Browser
The SNC-RZ30N is equipped with a 10/100 Base-T Ethernet interface
and has a web server capability with an assignable IP address. These
features coupled with the camera’s built-in software allow the user
to control the camera and view live images over a network. All that
is required is a PC running a standard web browser. No additional
software or plug-ins are required.
- High-Speed, Quiet Pan/Tilt/Zoom
(PTZ)
It’s easy to locate almost any position in the viewable area
surrounding the SNC-RZ30N using its high-speed PTZ capability. Of
all PTZ-capable network cameras, the SNC-RZ30N has one of the widest
ranges in its class: a pan range of 340°, a tilt range of 115°, plus
a 25x optical / 300x digital zoom capability. The full 340° pan
range can be covered in 2 seconds, and the -90° to +25° tilt range
can be covered in 1.5 seconds. In addition to the wide range of
motion and high-speed movements, the SNC-RZ30N incorporates gearless
direct-drive motors that ensure exceptionally quiet operation.
- High-Quality Image/Selectable
Parameters
The SNC-RZ30N has a number of selectable parameters that make it
easy to match the quality of the image with your bandwidth
requirements. For example, the SNC-RZ30N, which uses the
industry-standard JPEG compression format, has a compression ratio
selectable between 1/5 and 1/60. Also, with a maximum setting of 30
fps, the frame rate can either be set manually at a fixed frame
rate, or at a variable frame rate based on the amount of bandwidth
available. Furthermore, the resolution can be selected from a choice
of 736 x 480, 640 x 480, 320 x 240, and 160 x 120. With a high-speed
network connection, you can obtain high-quality video images, and
with a limited bandwidth connection, you can set the parameters so
that images are still very clear with no image break-up.
- Two Type II PCMCIA Expansion Slots
Two Type II PCMCIA card slots are integrated into the SNC-RZ30N.
These slots can be used to increase the storage capacity of the unit
by adding either a flash memory card or an ATA Hard Disk Drive (HDD)
card. IC recording media such as a Memory Stick media card with a
Memory Stick/PC card adaptor can be used as well.
- Image Transfer Using FTP/SMTP
Because the SNC-RZ30N supports both FTP and SMTP protocols, JPEG
still image data can be transferred, as required, either to an FTP
server or to a specified e-mail address as a JPEG attachment.
- Activity Detection/Alarm Trigger
The SNC-RZ30N has a built-in activity detection function that can be
set to trigger an alarm or a switch. For example, when there is
movement in the field-of-view of the camera, the camera could set
off an audible alarm or turn on a lamp. In addition to using the
built-in activity detection function, the SNC-RZ30N can be
configured with up to three external sensors for expanded
functionality. Any or all of these sensors can be set to trigger an
alarm, or to send a signal to a solenoid to perform functions such
as locking a door. Other functions can also be performed such as
sending the image that was captured at the time the alarm was
triggered to an e-mail address or to an FTP server. Also, because
the SNC-RZ30N has 8 MB of RAM designated as a buffer and a
high-speed data-transfer capability of up to 30 fps, hundreds of
images from before and after the alarm was triggered can be buffered
in the RAM and transferred.
- Analog Composite Video Output
The SNC-RZ30N can output an analog composite video signal via the
BNC connector on the unit’s rear panel. This is an ideal feature for
sending signals to a local recording device or monitor.
- RS-232C/485 Transparency Interface
External equipment can be connected to the RS-232C/485 interface of
the SNC-RZ30N, and can be controlled by a PC connected to the
network on which the SNC-RZ30N resides.
- Simultaneous Access
Up to 50 users can simultaneously access a single SNC-RZ30N to
monitor images and control the camera. One of two control modes for
the camera can be set by the administrator, allowing control of the
unit to be shared by a number of users. One mode gives priority to
the user who last attempted to control the camera, while the other
mode is time-based. When this mode is set, priority is given to a
user for a specified amount of time and when time expires, the next
person who takes control is given priority for that same amount of
time.
- Network Security Features
- IP Filtering - User access to the
SNC-RZ30N can be limited by IP filtering. Up to ten different groups
can be established by defining an IP address range for each group.
This allows users with IP addresses in a defined range to access the
camera, while denying access to all other addresses.
- Password Protection - User names
and passwords can be assigned to allow four levels of access.
Generally, the administrator has complete access/control of the
camera, while the other three levels can be set to limit user
privileges to functions such as PTZ control, viewing, trigger
control, etc.
- Other Features
- Direct Pointing or Vectoring -
There is an alternative method of controlling the pan and tilt of
the SNC-RZ30N. When this other method is selected, an on-screen
simulated pad appears on the GUI (Graphical User Interface) allowing
“direct pointing” or “vectoring” to control the camera.
- “Tour” Feature - The “tour”
feature allows the user to preset up to five scanning patterns with
up to 16 positions in each scan. This is useful when you wish to
monitor designated areas in a room.
- Cropping Feature - The
administrator can designate an area in the image to be cropped. This
feature is particularly useful when you wish to monitor a specific
location. In addition, it reduces the size of the image file, making
the storage and transfer of images more efficient.
- Day/Night Mode - The SNC-RZ30N has
a unique day/night mode, which allows images to be viewed even in
low
light conditions.
|
Specifications |
Camera |
Imager |
1/6 type Interline Transfer Super HAD CCD |
Pixels |
680,000 pixels (NTSC) |
Electronic shutter |
1/4 to 1/10,000 sec. (NTSC) |
Exposure |
Auto [Full Auto (including backlight
compensation), Shutter-priority, Iris-priority] and manual |
White balance |
Auto, ATW, Indoor, Outdoor, One-push
(trigger command), Manual |
EV Compensation |
-1.75 to +1.75 (15 steps) |
Iris |
Auto/Manual (F1.6 to close) |
Gain |
Auto/Manual (-3 dB to 28 dB) |
Focus mode |
Auto/Manual (Near, Far, One-push
autofocus) |
Lens |
Zoom Ratio |
25x optical zoom, 300x with digital zoom |
Horizontal viewing angle |
2.0 degrees to 45 degrees |
Focal length |
f = 2.4 mm to 60 mm |
F-number |
F1.6 (wide), F2.7 (tele) |
Minimum object distance |
Tele: 800 mm
Wide: 30 mm |
System/Network |
CPU |
32-bit RISC processor |
RAM |
32 MB (includes 8 MB alarm buffer) |
Embedded flash memory |
8 MB |
Resolution |
736 x 480, 640 x 480, 320 x 240, 160 x 120
(NTSC) |
Compression |
JPEG |
Compression ratio |
1/5 ~ 1/60 (10 steps) |
Frame rate |
30 fps max. (640 x 480) (NTSC) |
Protocols |
DHCP, TCP/IP, HTTP, ARP, FTP, SMTP, ICMP,
and SNMP |
Pan/Tilt |
Pan angle |
-170 to +170 degrees |
Pan speed |
2 sec./340 degrees |
Tilt angle |
-90 to +25 degrees |
Tilt speed |
1.5 sec./115 degrees |
Interfaces |
Ethernet |
100Base-TX /10Base-T (RJ-45) |
PCMCIA |
Type II x 2 |
Video Output |
Analog Composite (BNC x1) |
Sensor in |
3 |
Alarm out |
2 |
Serial IF |
RS-232C/485 (transparency only) |
Analog Video Output |
Signal system |
SNC-RZ30N (NTSC) |
Sync system |
Internal |
Horizontal resolution |
480 TV lines |
S/N ratio |
48 dB |
Min. illumination |
3 lx (color) |
General |
Power requirements |
DC 12 V via AC adaptor (100 to 240 V) |
Power consumption |
21.6 W (with ATA HDD card) |
Operating temperature |
32 °F to 104 °F (0 °C to + 40 °C) |
Storage temperature |
-4 °F to 104 °F (-20 °C to + 60 °C) |
Operating humidity |
20% to 80% Non-condensing |
Storage humidity |
20% to 95% Non-condensing |
Dimensions (W x H x D) |
5 5/8 x 7 x 5 3/4 inches (140 x 175 x 144
mm) |
Weight |
2 lb 10 oz (1.2 kg) |
A-20120814-1250-130-L
*This item is BRAND NEW -
not refurbished. It comes with all manufacturer supplied accessories, and full
manufacturer's USA warranty.
|