Soundcast SCK510 Model SubCast Transmitter/Receiver
Subwoofer Kit, Transmitter/receiver pair will transmit 20-20kHz and supports
full range audio, Internal antennas to broadcast Low Frequency Effects (LFE) or
full-range signal from a home theater receiver or any source with audio outputs,
USB connection works with all the major media players, Latency adjustment at
16Ms for in-room subwoofer and to 64Ms for longer range audio applications,
Interference-Free 2.4 GHz wireless system, Transmits long-range signals
50-to-300 feet through walls, doors, ceilings and even outdoors; Plug & Play -
requires NO drivers or software to install, All cables and connectors needed are
included, Small non-intrusive size, stands only 6” high
General Information |
Manufacturer |
Soundcast |
Manufacturer Part Number |
SCK510 |
Product Name |
Model SubCast Transmitter/Receiver Subwoofer Kit |
Overview |
SubCasts allows you to make any subwoofer
wireless. No programming, no assigning IP addresses, just plug Sub "out"
into SubCast transmitter and power it up, then plug Receiver module into
Subwoofer inputs and power it up, and Yee Ha, subwoofers can now be
placed anywhere in the room. SubCast has a latency adjustment that will
put latency at 15Ms.
BIG NOTE: This is actually a full range transmitter - receiver pair. It
will transmit 20-20K Hertz and can be used to support full audio, not
just Low Frequency Effects. It is marketed as a Sub kit but has many
more, very flexible uses. There is latency adjustment to 64Ms for longer
range applications. |
Features |
- Transmitter/receiver pair will
transmit 20-20kHz and supports full range audio, not just low
frequency effects
- Internal antennas to broadcast Low
Frequency Effects (LFE) or full-range signal from a home theater
receiver or any source with audio outputs
- USB connection works with all the
major media players including iTunes, RealPlayer, MusicMatch,
Windows and internet radio stations
- Latency adjustment at 16Ms for
in-room subwoofer and to 64Ms for longer range audio applications
- Interference-Free 2.4 GHz wireless
system – transparent to microwave ovens, cordless phones, most
routers and other wireless devices
- Transmits long-range signals
50-to-300 feet through walls, doors, ceilings and even outdoors
- Plug & Play - requires NO drivers
or software to install
- All cables and connectors needed
are included
- Small non-intrusive size, stands
only 6” high
|
Specifications |
Technology |
Frequency Hopping Spread Spectrum (FHSS)
40-Ch wireless protocol, Interference-Free 2.4 GHz system. |
Product Dimensions (both Transmitter and
Receiver) |
Height - 6" (15.5 cm) - Width - 1 1/8th"
(4 cm) Depth - 5/8" (2.5 cm) |
Shipping Weight |
1.8 lbs - (.82 kg) |
A-20111013-1423-130-L
*This item is BRAND NEW -
not refurbished. It comes with all manufacturer supplied accessories, and full
manufacturer's USA warranty.
|