| General
Information |
| Manufacturer
|
Stiebel Eltron |
| Manufacturer Part
Number |
232099
|
| Product Name
|
Mini 3-1 Mini 3.5-1 Tankless
Electric Water Heater
|
| UPC Code |
094922372512 |
| Overview |
| An excellent
addition to any hotel, school, gas station and more, this
Stiebel Eltron 232099 Mini 3.5 tankless electric water
heater is designed for installation at the point-of-use
for an energy-efficient means of supplying an unlimited
supply of hot water while eliminating standby heat loss!
Activated by a minimum 0.40 GPM flow rate, this unit
boasts 3.5 kW of heating power and a high-limit pressure
cutout with manual reset for optimum safety and peace of
mind. It includes a 0.66 GPM aerator; no pressure relief
valve, drains, or circulating pumps are needed. The
Stiebel Eltron 232099 Mini 3.5 point-of-use tankless water
heater features a compact, space-saving design with an
attractive, high-impact polycarbonate housing |
| Features |
|
Tankless design prevents
Legionella bacteria growth
Continuous supply of
warm water on demand
High limit switch with
manual reset
Easy installation-inch
O.D. flex connections
Engineered in Germany to
be the best
Exclusive design
prevents dry firing
No T and P relief valve
needed (Check local code)
Comes complete with wire
pigtail
Advanced Nichrome wire
heating element
Correctly sized aerator
supplied with unit
No standby heat loss
with tankless design
99 percent efficiency
Flow switch activated
for virtually silent operation
Mounts on wall at
point-of-use
Cold water only line
needed to be run to lavatory
Compact and designed to
be visible or hidden in cabinet
Compatible with sensor
actuated or metered faucets
|
| Specification |
Voltage
|
120v |
Wattage
|
3.5 kW
|
Amperage Draw
|
29 A
|
Min. Recommended Circuit Breaker
Size
|
30 A
(SP) (This is our recommendation for overcurrent
protection sized at 100percent of load. Check local
codes for compliance if necessary.
Tankless water heaters are considered a non-continuous
load) |
Min. Recommended Wire Size (copper)
|
10 AWG (Copper must be used. Conductors should be
sized to maintain a voltage drop of less than 3 percent
under load) |
Min. Flow to Activate
|
Mechanical Units
|
0.40 GPM 1.5 l/min
|
Thermostatic Units
|
0.30 GPM 1.15 l/min
|
Water Temp. Range
|
Electronic units are adjustable
from
86-122 Degrees Fahrenheit
30-50 Degrees Celsius
|
Energy Factor (EF)
(Mechanical/Thermostatic)
|
0.99 / 0.99 |
Water Volume in Unit
|
0.026 gal
0.1 l
|
Working Pressure
|
150 psi
10 bar
|
Tested to Pressure
|
300 psi
20 bar
|
Water Connections
|
3/8" O.D. flexible braided
stainless steel hose connectors. (Mechanical units
suitable for supply with cold water only. Thermostatic
units can accept inlet water of 122 degrees fahrenheit)
|
Weight and Dimensions
|
Dimensions
|
9" x 10" x 6.12" |
Weight
|
6 lbs
|
