TOA Electronics
C-CV854D-3 Vandal-proof Indoor/Outdoor Day/Night
Color Camera, High-resolution
camera with 1/3" CCD, 380,000-pixel (NTSC) (PAL: 440,000) for 500-line
horizontal resolution, High sensitivity of 0.5lx in color mode and 0.05lx in B/W
mode, Auto-iris 3X varifocal lens with 3.0 – 9.0 mm focal length, 90.3° – 31.9°
horizontal range and 66.4° – 23.9° vertical range ensures a wide range of
viewing angle adjustments, Sturdy design, with die-cast aluminum alloy camera
body, 3.5 mm thick polycarbonate dome cover and impactresistant structure that
can withstand impacts with 50-joule energy
General Information |
Manufacturer |
TOA Electronics |
Manufacturer Part Number |
C-CV854D-3 |
Product Name |
Vandal-proof Indoor/Outdoor Day/Night Color Camera |
Marketing Information |
The C-CV854D-3 is a high-resolution,
indoor/outdoor use vandal-resistant 24V AC/12V DC type surveillance
camera
capable of both day and night coverage. It operates as a color camera in
daylight, and as a highly sensitive monochrome camera in darkness. This
selectable automatic dual operating capability makes it ideal for
applications where around the clock coverage is essential. Thanks to a
noise-reduction function, clear images can be viewed, even under poor
lighting conditions. The C-CV854D-3 incorporates a 3-axis (horizontal,
vertical and rotational) adjustment mechanism and a 3X varifocal lens,
which facilitate adjustment of the camera's orientation and view angle
during installation. The unit's dustproof and waterproof construction
enables it to be mounted to an outdoor wall or ceiling without requiring
any extra equipment to protect the camera against dust or rain. In
addition, by installing the TOA C-A854H heater unit inside the camera
housing, the camera may be used at ambient temperatures as low as minus
30 degrees centigrade. The camera body is made of die-cast aluminum
alloy, with a polycarbonate dome cover, ensuring a high degree of
resistance to even strong impacts with an energy of 50 Joules. |
Features |
- Day/Night mode
- Backlight compensation
- Monitor output
- Optional Heater Unit, model
C-A854H
- Sturdy design, with die-cast
aluminum alloy camera body, 3.5 mm thick polycarbonate dome cover
and impactresistant structure that can withstand impacts with
50-joule energy.
- Tamper-proof screws make the dome
hard to open without (supplied) dedicated L-shaped wrench.
- Dust- and water-proof (IP66)
construction ensures suitability for both indoor and outdoor
installations, with no need for any extra protective device.
- Transparent dome cover does not
diminish the brightness of incoming light.
- Black inner cover makes it
difficult to see the direction the lens is facing.
- 3-axis (horizontal vertical and
rotational mechanism) enables exact adjustment of camera orientation
during installation on ceilings, walls or slanting surfaces.
- Auto-iris 3X varifocal lens with
3.0 – 9.0 mm focal length, 90.3° – 31.9° horizontal range and 66.4°
– 23.9° vertical range ensures a wide range of viewing angle
adjustments.
- High-resolution camera with 1/3"
CCD, 380,000-pixel (NTSC) (PAL: 440,000) for 500-line horizontal
resolution.
- High sensitivity of 0.5lx in color
mode and 0.05lx in B/W mode.
- Selectable Color mode and
automatic Day/Night mode for color daylight and monochrome nighttime
operation.
- Electronic sensitivity boost of up
to 4X.
- Noise reduction function ensures
clear image under poor lighting conditions.
- Backlight compensation (ON/OFF).
- Selectable auto white balance
(ATW/AWB).
- Flicker-free function reduces
monitor image flicker caused by fluorescent lighting(ON/OFF).
- Focus adjustment switch enables
easy and accurate adjustment, without requiring use of ND (neutral
density) filter, to ensure proper focus during nighttime operation.
- Video output via (supplied) cord
with BNC connector facilitates installation adjustments and camera
maintenance.
- RCA pin jack monitor output
enables the angle of view to be adjusted during installation with
the monitor connected.
- Dual power source for 24V AC or
12V DC operation.
- Installation within the camera of
optionally available C-A854H heater unit extends operating range to
–30°C.
|
Specifications |
Power Source |
24V AC, 50/60Hz or 12V DC |
Power Consumption |
4W (300mA) |
Image Device
|
1/3 type IT-CCD
|
Number of Effective Pixels |
PAL: 752 (H) × 582 (V) (440,000 pixels)
NTSC: 768 (H) × 494 (V) (380,000 pixels)
|
Scanning System
|
2:1 interlace
|
Scanning Frequency |
PAL: Horizontal 15.625kHz, Vertical
50.00Hz
NTSC: Horizontal 15.734kHz, Vertical 59.94Hz |
Monitor Output |
VBS 1.0V (p-p) 75Ω, RCA pin jack
|
Video Output |
VBS 1.0V (p-p) 75Ω, BNC-R jack |
Synchronizing System
|
Internal synchronization
|
Resolution
|
PAL: Horizontal: 500 lines (at center),
Vertical: 410 lines (at center)
NTSC: Horizontal: 500 lines (at center), Vertical: 350 lines (at
center) |
S/N Ratio |
50dB
|
Minimum Illumination
|
3 lx (350mV)
|
White Balance Mode |
ATW/AWB (switch selector) |
Focal Length |
f = 3.0mm - 9.0mm
|
Maximum Aperture Ratio |
1:1.4 - 2.4 |
Iris
|
Auto-iris
|
Angle of View |
Horizontal: 90.3° – 31.9°. Vertical: 66.4°
– 23.9°, Diagonal: 115.4° – 39.8° |
Control Switch
|
ON/OFF (used for focus adjustment)
|
Day/Night Mode |
Automatic/Off (switch selector) |
Other Function |
Backlight compensation, Shutter speed,
Iris control, Max. 4X sensitivity increase (auto), Noise reduction |
Water/Dust Protection |
IP-66
|
Operating Temperature |
-10°C to +50°C (When an optional heater
unit is attached: –30°C to +50°C) |
Operating Humidity
|
Under 90% RH (no due condensation
produced)
|
Applications
|
Outdoor/Indoor use |
Finish
|
Case, bezel: Case, bezel: Die-cast
aluminum, light gray, paint
Dome cover: PC resin (transparent) |
Dimensions
|
ø154.2 × 110 (H)mm (excluding the cables) |
Weight
|
1.1kg
|
Accessories
|
L-type wrench x 1, Bade gasket x1 |
Option |
Heater unit: C-A854H |
A-20070804-1250-130-E
*This item is BRAND NEW -
not refurbished. It comes with all manufacturer supplied accessories, and full
manufacturer's USA warranty.
|