|
Toa Electronics A-906MK2
Mixer/Amplifier - 8-CH, 60 Wrms Power Amplifier. Modular design for fast
and easy custom configurations; 1 module slot; 25V; 70V and 4/8 ohm
speaker outputs; Built-in protection circuitry when heat sink
temperature overheats; Master volume control on front panel; Normal;
peak; power; protect and signal LEDs on front panel; Direct input on
back panel; 20 dB input gain switch on back panel; Low cut switch on
back panel; Includes one volume control security cover.
|
General
Information |
|
Manufacturer |
Toa
Electronics |
|
Manufacturer Part
Number |
A-906MK2 |
|
Product Line |
Amplifier |
|
Product Name |
A-906MK2 Mixer/Amplifier - 8-CH, 60 Wrms Power Amplifier. Modular design
for fast and easy custom configurations; 1 module slot; 25V; 70V and 4/8
ohm speaker outputs |
|
The TOA 900 SERIES are
widely recognized as the industry standard in installed sound system
amplification. When reliability and performance are critical – such as
in paging and music distribution for airport, hospital, and industrial
sound systems – you can count on the TOA 900 Series to perform
consistently, day-in and day-out.The A-903MK2 (30 W), A-906MK2 (60 W)
and A-912MK2 (120 W) Modular Mixer / Amplifiers are engineered for high
performance with wide frequency response, very low noise and distortion,
and excellent output regulation. Eight module slots allow you to easily
configure custom configurations using TOA plug-in modules with an
extensive array of features and connector types. You can increase the
input capacity by connecting a second mixer or mixer/amplifier to the
rear-panel Bridge In / Out jack. Outputs include transformerisolated 25
V, 70 V and 8 ohm (A-903MK2: 4 ohm) plus a direct low-impedance mode if
non-transformer operation is required. Multiple paging priorities are
easily configured using optional mutetype modules activated by external
switch-closure or mute-send modules. Pre-Out / Power-In jacks allow
connection of external signal processing between the mixer and amplifier
sections. Other features include protection circuitry, auxiliary output,
bass / treble controls and remote master volume terminals. |
|
Features & Benefits |
-
Modular design for fast and easy custom configurations.
-
1
module slot.
-
25V;
70V and 4/8 ohm speaker outputs.
-
Built-in
protection circuitry when heat sink temperature overheats.
-
Master volume control on front panel.
-
Normal; peak; power; protect and signal LEDs on front panel.
-
Direct input on back panel.
-
20 dB
input gain switch on back panel.
-
Low
cut switch on back panel.
-
Includes one volume control security cover.
-
Low
distortion and noise level.
-
Full
range of plug-in modules.
Input
level switch.
Mountable on two EIA standard rack units.
UL and CSA listed.
|
|
Specifications |
|
Continuous Output Power:
|
60 Wrms
|
|
Power Consumption:
|
100W
|
|
Power Bandwidth:
|
Direct: 20 Hz - 20 kHz
(0.5% THD) and Transformer: 50 Hz - 20 kHz (0.5% THD)
|
|
Frequency Response:
|
Direct: 20 Hz - 20 kHz
(+/- 1 dB) and Transformer: 20 Hz - 15 kHz (+/- 1 dB) and 20 Hz - 20 kHz
(+1 dB to -3 dB)
|
|
S/N Ratio:
|
108 dB @ 0 dBV or 90 dB @
-20 dBV
|
|
THD:
|
0.01% @ 1 kHz
|
|
Impedance:
|
Input port: 10 kohm or
Direct input: 10 kohm
|
|
Input Sensitivity:
|
Input port: 100 mV or 1000
mV or Direct input: 100 mV or 1000 mV
|
|
Output Regulation:
|
Direct: < 0.5 dB no load
to full load or Transformer: < 1 dB no load to full load
|
|
Operating Temperature:
|
12 - 140 degrees F
|
|
Dimensions:
|
3-29/32''H x 16-1/2''W x
14-3/32''D |
A-20050723-1250-117-L
M-20051108-1250-111-L
M-20060606-1250-138-E
M-20060809-1250-117-E
* This
item is BRAND NEW - not refurbished. It comes with all manufacturer supplied
accessories, and full manufacturer's USA warranty. |
