|
|
Transcend TS512MFB72V6T-T 240PIN DDR2 667
Fully Buffered DIMM 4GB Memory Module With 256Mx4 CL5, 3.2Gb/s, 4.0Gb/s link
transfer rate, 1.8V +/- 0.1V Power Supply for DRAM VDD/VDDQ, 1.5V +/- 0.075V
Power Supply for AMB VCC, 3.3V +/- 0.3V Power Supply for VDDSPD, Serial presence
detect with EEPROM, UPC 760557806042, 8Banks, Buffer Interface with high-speed
differential point-to-point Link at 1.5 volt, Channel error detection &
reporting, Channel fail over mode support, Posted CAS, Programmable CAS Latency
(3, 4, 5), Automatic DDR2 DRAM bus and channel calibration, MBIST and IBIST Test
functions, Hot add-on and Hot Remove Capability, Transparent mode for DRAM test
support, Support ECC Function, RoHS compliant
General Information |
Manufacturer |
Transcend |
Manufacturer Part Number |
TS512MFB72V6T-T |
Product Name |
240PIN DDR2 667 Fully Buffered DIMM 4GB Memory Module With
256Mx4 CL5 |
UPC Code |
760557806042 |
Overview |
The TS512MFB72V6T-T is a 512M x 72bits ECC
DDR2-667 Fully Buffered DIMM. The TS512MFB72V6T-T consists of 36pcs
256Mx4bits DDR2 DRAM in 60 balls FBGA package, 1 pc AMB IC, and a 2048
bits serial EEPROM on a 240-pin printed circuit board. The
TS512MFB72V6T-T is a 240pin fully buffered dual in-line memory module.
The Advanced Memory Buffer also allows buffering of memory traffic to
support large memory capacities. All memory control for the DRAM resides
in the host, including memory request initiation, timing, refresh,
scrubbing, sparing, configuration access, and power management. The
Advanced Memory Buffer interface is responsible for handling channel and
memory requests to and from the local DIMM and for forwarding requests
to other DIMM on the memory channel. Fully Buffered DIMM provides a high
memory bandwidth, large capacity channel solution that has a narrow host
interface. |
Features |
- 240pin fully buffered dual in-line
memory module
- 3.2Gb/s, 4.0Gb/s link transfer
rate
- 1.8V +/- 0.1V Power Supply for
DRAM VDD/VDDQ
- 1.5V +/- 0.075V Power Supply for
AMB VCC
- 3.3V +/- 0.3V Power Supply for
VDDSPD
- Buffer Interface with high-speed
differential point-to-point Link at 1.5 volt
- Channel error detection &
reporting
- Channel fail over mode support
- Serial presence detect with EEPROM
- 8Banks
- Posted CAS
- Programmable CAS Latency: 3, 4, 5
- Automatic DDR2 DRAM bus and
channel calibration
- MBIST and IBIST Test functions
- Hot add-on and Hot Remove
Capability
- Transparent mode for DRAM test
support
- Support ECC Function.
- RoHS compliant
|
A-20121116-1052-130-L M-20180528-1052-231-L
*This item is BRAND NEW -
not refurbished. It comes with all manufacturer supplied accessories, and full
manufacturer's USA warranty.
|