|
True TDD-3 Draft Beer Cooler, (3) keg capacity, s/s counter top, black vinyl exterior, & (2) doors w/locks, galv. interior w/300 stainless steel floor, (2) column type beer faucets, 1/3 HP 115/60/1.
|
General
Information |
|
Manufacturer |
True |
|
Manufacturer Part
Number |
TDD-3 |
|
Product Line |
Draft Beer Cooler |
|
Product Name |
TDD-3 Draft Beer Cooler,
3 keg capacity, black vinyl exterior, Oversized, factory balanced,
refrigeration system holds 33°F to 38°F |
|
True's oversized and
balanced refrigeration system with extra large evaporator performs in
the hottest, most humid climates. Excellent for all tropical beach bars.
Uniform guided air circulation maintains constant keg temperature, and
special plastic tubes force cold air into 3" draft columns, providing
even temperature of beer from keg through the beer lines to the faucet.
Cabinet will easily maintain 34 degrees Fahrenheit (+1.1 degrees
Celsius) to 38 degrees Fahrenheit (+3.3 degrees Celsius) temperatures.
Bright, smooth finish. Lifetime durability. Countertop with brightly
polished anodized aluminum rail provides convenient storage space for
glasses. Will not peel or chip. True's classic black vinyl finish and
sleek cabinet design create a most attractive underbar refrigerator.
Also available in stainless steel for an additional cost. Snap-in
magnetic gaskets provide a positive airtight seal. Factory-tested (over
1,000,000 times), guaranteed door hinges and torsion springs. |
|
Features & Benefits |
- Draft Beer Cooler
- (3) keg capacity
- s/s counter top
- black vinyl exterior
- (2) doors w/locks
- galv. interior w/300 stainless steel floor
- (2) column type beer faucets
- 1/3 HP
- 115/60/1
- True’s direct draw
beer dispensers are designed with enduring quality and value. Our
commitment to using the highest quality materials and oversized
refrigeration assures colder product temperatures and years of trouble
free service.
- Oversized, factory
balanced, refrigeration system holds 33°F to 38°F (.5°C to 3.3°C).
- Exterior - heavy
duty, wear resistant laminated black vinyl front and sides. Matching
black aluminum back. All stainless steel counter top.
- Interior - 300
series stainless steel fl oor with 1/2" (13 mm) reinforced lip and
heavy gauge galvanized steel walls. NSF and bottled product.
- 3" (77 mm) diameter
stainless steel insulated beer columns. Cold air is directed into beer
columns to reduce foaming and maximize draft beer profi ts.
- Entire cabinet
structure and solid doors are foamed-in-place using high density, CFC
free, polyurethane insulation.
- DESIGN
- True’s direct
draw beer dispensers are designed with enduring quality and value.
Our commitment to using the highest quality materials and oversized
refrigeration assures colder product temperatures and years of
trouble free service.
- REFRIGERATION
SYSTEM
- Factory
engineered, self-contained, capillary tube system using
environmentally friendly (CFC free) 134A refrigerant.
- Extra large
evaporator coil balanced with higher horsepower compressor and large
condenser; maintains cabinet temperatures of 33°F to 38°F (.5°C to
3.3°C).
- Sealed, cast iron,
self-lubricating evaporator fan motors and larger fan blades give
True merchandisers a more effi cient low velocity, high volume airfl
ow design. This unique design insures faster temperature pull down
of warm product, colder holding temperatures and faster recovery in
high use situations.
- Condensing unit
accessed from behind front grill, slides out for easy cleaning and
maintenance.
- CABINET
CONSTRUCTION
- Exterior - heavy
duty, wear resistant laminated black vinyl front and sides. Matching
black aluminum back. All stainless steel counter top.
- Interior - 300
series stainless steel floor with 1/2" (13 mm) reinforced lip and
heavy gauge galvanized steel walls.
- Insulation -
entire cabinet structure and solid doors are foamed-in-place using
high density, CFC free, polyurethane insulation.
- Welded, heavy
duty galvanized frame rail dipped in rust inhibiting enamel paint
for corrosion protection inside and out.
- 3" (77 mm)
diameter stainless steel insulated beer columns. Cold air is
directed into beer columns to reduce foaming and maximize draft beer
profi ts.
- DOORS
- Wear-resistant
laminated black vinyl exterior with heavy gauge galvanized steel
liner.
- Each door fi tted
with 12" (305 mm) long recessed handle that is foamedin-place with a
sheet metal interlock to insure permanent attachment.
- Magnetic door
gaskets of one piece construction, removable without tools for ease
of cleaning.
- Door locks
standard.
- LIGHTING
- Incandescent
interior lighting.
- MODEL FEATURES
- Evaporator is
epoxy coated to eliminate the potential of corrosion.
- Convenient 1/2"
(13 mm) barbed T drain fitting located on front of cooler.
- Designed to
accommodate a variety of beer kegs.
- Listed under NSF-7
for the storage and/or display of packaged or bottled product.
- ELECTRICAL
- Unit completely
pre-wired at factory and ready for fi nal connection to a 115/60/1
phase - 15 amp dedicated outlet. Cord and plug set included.
|
|
Images |
|
 |
|
Specifications |
- 1/2 Barrels : 3
-
Swing Doors: 2
-
Hp : 1/3
-
Amp. : 8.5
-
Crate Weight: 335
-
Cabinet Dimensions
- L x D x H:
69 1/8 x 27 1/8 x 37
|
A-20041025-1216-111-L
M-20060928-1412-117-E
* This
item is BRAND NEW - not refurbished. It comes with all manufacturer supplied
accessories, and full manufacturer's USA warranty.
|
