General Information

• Dual sided for convenient access to product from both sides of unit.
• Oversized, forced-air refrigeration system maintains milk temperatures of 33°F to 38°F (.5°C to 3.3°C). Colder holding temperatures provide better tasting milk, increased sales and less product waste.
• Exterior - non-peel or chip white laminated vinyl front, sides, back and top; durable and permanent.
• All stainless steel self-service doors feature convenient drop front and “hold-open” fl ip-up top.
• Standard with door locks.
• Interior - 300 series stainless steel walls and reinforced floor.
• Standard with heavy duty floor racks and convenient clean out drain
• Designed to hold 16 milk crates.
• Entire cabinet structure and solid doors are foamed-in-place using high density, CFC free, polyurethane insulation.
• Exterior digital temperature display.
• Evaporator is epoxy coated to eliminate the potential of corrosion.
• Convenient clean out drain with 1/2" (13 mm) NPT-PVC drain plug.

• GENERAL
  • Doors: 4
  • Capacity
    • Cu. Ft. (liters): 24.5 (694)
    • Crate Cap.: 16
       
  • Floor Racks : 3
  • Cabinet Dimensions (inches) (mm)
    • L: 58 (1474)
    • D: 33 3/8 (848)
    • H: 41 1/8 (1045)
       
  • Hp : 1/2
  • Voltage: 115/60/1
  • Amp. : 10.4
  • NEMA Config: 5-15P
  • Cord Length (total ft) (total mm): 9 (2.74)
  • Crate Weight (lbs) (Kg): 485 (220)
     
• REFRIGERATION SYSTEM
  • Factory engineered, self-contained, capillary tube system using environmentally friendly (CFC free) 134A refrigerant.
  • Extra large evaporator coil balanced with higher horsepower compressor and large condenser; maintains milk temperatures of 33°F to 38°F (.5°C to 3.3°C). Colder holding temperatures provide better tasting milk, increased sales and less product waste.
  • Sealed, cast iron, self-lubricating evaporator fan motor(s) and larger fan blades give True merchandisers a more efficient, low velocity, high volume airflow design. This unique design insures colder holding temperatures and faster recovery in high use situations.
  • Condensing unit accessed from behind back grill, slides out for easy cleaning and maintenance.
     
• CABINET CONSTRUCTION
  • Exterior - non-peel or chip white vinyl front, sides, back and top; durable and permanent.
  • Interior - 300 series stainless steel walls and reinforced fl oor. Standard with heavy duty floor racks.
  • Insulation - entire cabinet structure is foamed-inplace using high density, CFC free, polyurethane insulation.
  • Welded, heavy duty galvanized frame rail dipped in rust inhibiting enamel paint for corrosion protection inside and out.
  • Frame rail fitted with four (4) easy roll, 4" (102 mm) diameter swivel castors (front castors lock in place).
  • Designed to hold 16 milk crates.
     
• DOORS
  • All stainless steel self-service doors feature convenient drop front and “hold-open” flip-up top. Door support bumpers standard.
  • Door locks standard.
  • Magnetic door gaskets of one piece construction, removable without tools for ease of cleaning.
     
• ELECTRICAL
  • Unit completely pre-wired at factory and ready for final connection to a 115/60/1 phase - 15 amp dedicated outlet.
  • Cord and plug set included.