• Oversized aluminum fin, copper tube condenser, sized for high ambient temperature.
• Liquid line drier.
• Sightglass.
• Handvalve.
• Low pressure control.
• High pressure safety switch.
• Pump down valve factory installed.
• TX valve factory installed (some adjustment may be required).
• Large electrical panel for ease of access.
• Cabinet and condenser priced separately.

Outdoor Condensing Units Include:

• Galvanized housing.
• Low ambient head pressure control valve.
• Crankcase heater.

Remote Condensing Unit Recommendations:

• Consult factory for required model.
• Units shipped with P.O.E. oil.
• Check pipe sizing chart prior to installation.
• Some adjustments may be required to unit.
• Install in accordance with all state and local electrical and plumbing codes.
• Unit should be installed by a refrigeration professional.
• Use ASHRAE recommended piping practices for oil return to compressor.
• System should be evacuated to 200 microns and hold 500 microns.
• Test controls per manufacturer’s recommendation.
• Maximum suggested height for pipe run should not exceed 35 feet.
• Maximum drop for pipe should not exceed 15 feet.
• Use only refrigeration tubing (soft or hard can be used.)