|
Unicom POE-63226T SmartPoE/2402M 24 Port 10/100
Managed PoE Switch with 2 Gigabit Combo, Conforms to IEEE802.3 10BASE-T, 802.3u
100BASE-TX/FX, 802.3ab 1000BASE-T, 802.3z Gigabit fiber, 802.3af power over
Ethernet, Port Based VLAN /802 .1QTag VLAN, High back-plane bandwidth 8.8Gbps,
IEEE802.3ad Port trunk with LACP, Rapid spanning tree IEEE802.1w, Spanning tree
protocol IEEE 802.1d, IGMP snooping and IGMP Query mode for Multi-media
applications, IEEE 802.1p class of service, Port mirror and bandwidth control,
Supports GVRP function, Broadcast storm filter, End point insert mode remote
power feeding, DHCP client, Provides extra DC 48V input with redundant function
and management power status through RS-232 port
|
General Information |
|
Manufacturer |
Unicom
|
|
Manufacturer Part Number |
POE-63226T |
|
Product Name |
SmartPoE/2402M 24 Port 10/100 Managed PoE
Switch with 2 Gigabit Combo |
|
Marketing Information |
The SmartPoE/2402M is a multi-port switch
that can be used to build high-performance switched workgroup
networks.This switch is a storeand-forward device that offers low
latency for high-speed networking and features a “store-and-forward
“switching scheme.This allows the switch to auto-learn and store source
addresses in an 8K-entry MAC address table. The SmartPoE/802M is
targeted at workgroup, department or backbone computing environments.The
SmartPoE/802M has twenty-four autosensing 10/100Base-TX RJ-45 ports and
all ports support the PoE injector function.The switch as two
auto-detected Gigabit Combo ports for higher connection speed.
Also, the SmartPoE/2402M provides one extra 48 VDC power input for the
power supply input connection.
Notes: The SmartPoE/2402M switch offers multiple solutions for your
everyday needs. It comes equipped with an internal 200 watt power supply
that can support up to 8.33 watts per port for up to
24 ports or 15.4 watts for up to 12 ports . If your solution requires
the need for full 24 port PoE power, you can attach our optional Single
DC 48V/400W (POE-DCP148-UPS) output power supply
to give you the flexibility of full 24 port PoE power of up to 15.4
watts per port. In addition, if you need to power additional PoE
switches, we offer a Dual DC 48V/400W output power supply (POE-DCP248)
to power up to two extra PoE (PSE) devices. |
|
Features |
- Conforms to IEEE802.3 10BASE-T,
802.3u 100BASE-TX/FX, 802.3ab 1000BASE-T, 802.3z Gigabit fiber,
802.3af power over Ethernet
- Port Based VLAN /802 .1QTag VLAN
- IEEE802.3x Flow control:
- Flow control for full duplex
- Back pressure for half duplex
- High back-plane bandwidth 8.8Gbps
- IEEE802.3ad Port trunk with LACP
- Rapid spanning tree IEEE802.1w
- Spanning tree protocol IEEE 802.1d
- IGMP snooping and IGMP Query mode
for Multi-media applications
- IEEE 802.1p class of service
- Port mirror and bandwidth control
- IEEE 802.1x user authentication;
TACACS+ (option)
- Supports GVRP function
- Broadcast storm filter
- End point insert mode remote power
feeding
- DHCP client
- Provides extra DC 48V input with
redundant function and management power status through RS-232 port
- Online extra power supply testing
through RS-232 port
- Management
byWeb/SNMP/Telnet/Console
- Supports command line interface
management
- System event log support
- SNTP support
|
|
Specifications |
|
Standards |
IEEE802.3 10BASE-T
IEEE802.3u 100BASE-TX/100BASE-FX
IEEE802.3z Gigabit SX/LX
IEE802.3ab Gigabit 1000T
IEEE802.3x Flow Control and Back pressure
IEEE802.3ad Port trunk with LACP
IEEE802.1d Spanning tree protocol
IEEE802.1w Rapid spanning tree protocol
IEEE802.1p Class of service
IEEE802.1Q VLAN Tagging
IEEE 802.1x user authentication
IEEE802.3af Power over Ethernet |
|
Connector |
10/100TX: 24 x RJ-45
RJ-45 Pin assignment and polarity: 1/2:RX signal and - 48V DC; 3/6:TX
signal and +48V DC |
|
Gigabit Copper |
2 x RJ-45, 2 MINI GBIC for MINI GBIC
transceiver |
|
RS-232 connector |
One RS-232 DB-9 female connector for
switch management and 2 RS-232 DB-9 male connectors on rear side for DC
power supply and UPS management |
|
Remote Pwr Feeding |
End-point insert type and compatible with
IEEE802.3af
Per port feeding power: 15.4Watts (maximum)
Switch architecture: Store and forward switch architecture. Back-plane
up to 8.8Gbps |
|
MAC address |
8K MAC address table with Auto learning
function |
|
Memory |
3Mbits for packet buffer |
|
Flash ROM |
512Kbytes x 2 |
|
System memory |
8Mbytes x 1 |
|
LEDs |
System Power
10/100TX RJ-45 Port: Link/Active (Green: 1000Mbps/Yellow: 10/100Mbps),
Full-duplex/collision
MINI GBIC/ Copper: Link/Activity, Full duplex/collision, 1000Mbps,
100Mbps |
|
Power |
Embedded AC power supply: AC 100~240V,
50/60Hz, 200W |
|
Extra power input |
DC48V |
|
Power consumption |
20W (maximum /without PD) |
|
Ventilation |
2 DC Fans with detect function |
|
Operating environment |
0°~40°, 10%~95% RH |
|
Storage environment |
-40°~70°, 95% RH |
|
Dimension |
440mm (W) x 280mm (D) x 44mm (H) |
|
EMI |
FCC Class A, CE |
|
Safety |
UL, cUL, CE/EN60950 |
|
Software Features |
|
Management |
SNMP management, Telnet management, web
management, RS-232 terminal console for command line interface
management |
|
SNMP MIB |
RFC 1157 SNMP, RFC 1213 MIB II, RFC 1643
Ethernet like, RFC 1493 Bridge MIB, RFC 2674 VLAN MIB, private MIB, RFC
1628 UPS MIB, RFC3621 Power Ethernet MIB |
|
RFC standard |
RFC 2030 SNTP, RFC 2821 SMTP (option), RFC
1492 TACACS+ (option), RFC 1215 Trap, RFC 1757 RMON 1 |
|
Type of Trap |
Cold start, warm start, link down, link
up, authorization fail, Trap station up to 3. Private trap for power
suppl device. |
|
Software Upgrade |
TFTP and console firmware upgradeable. |
|
Port Trunk |
Support IEEE802.3ad with LACP function. Up
to 7 trunk groups and group member up to 4. The trunk port within
24-port 10/100TX and extension module. |
|
Spanning Tree |
IEEE802.1d spanning tree, IEEE802.1w rapid
spanning tree. |
|
VLAN |
Port based VLAN
IEEE802.1Q Tag VLAN
IEEE802.1v Protocol VLAN (IP, IPX,..)
The static VLAN groups up to 256 and dynamic VLAN groups up to 2048, the
VLAN ID can be assigned from 1 to 4094. |
|
Class of Service |
Per system supports high and low queues.
The priority service rule: first come first service, all High before
Low, WRR for High or low weight. |
|
Port-based Priority |
Support 3 settings: “Disable, Low or High
priority”. When set to “Disable”, the income packet will follow QOS
policy; Otherwise, the packet will follow port priority setting to
“High/Low” queue. |
|
IGMP |
It supports IGMP snooping for multimedia
application and supports 256 groups
Port Security: It supports ingress and egress MAC address filter and
static source MAC address lock. |
|
Port Mirror |
Global system supports 3 mirroring types:
“RX, TX and Both packet”. The maximum of port mirror entries is up to
25. |
|
Bandwidth Control |
Per port supports bandwidth control. Per
level 100Kbps. |
|
802.1x Authentication |
Support IEEE802.1x User-Authentication and
can report to RADIUS server: Reject, Accept, Authorize, Disable |
|
DHCP |
DHCP client |
|
Packet filter |
Broadcast storm filter |
|
System setup and control |
System calibrate, AC power line frequency
rejection, IEEE 802.3af resistor range adjust |
|
Port configuration |
Port Disable / Enable. PD detect control
(enable/disable), Classification detect control (enable/disable), DC
disconnect detect control |
|
Fault status detect |
Null: no PD present
Overload: current support over 475mA @ DC 48V and over 50 milliseconds
DR fail: PD discovery resistor is not in the limited range |
|
Mode status |
System detects status, it will show I
–sample, V-sample and R-detect. |
|
Parametric Info |
It will show current PD parameters, it
include Discoverresistor detected value, current, voltage, power
consumption, classification current and determined class |
|
NTP |
Supports RFC 2030 Simple Network Time
Protocol (option) |
|
SMTP |
Supports RFC2821 Simple Mail Transfer
protocol (option) |
|
System log |
System Log record up to 1000 entries. |
|
Power monitor |
Supports power supply monitoring function
for AC power, DC power, fan status 2 types of power supply can be
installed with POE switch, POE-DCP248, and POE-DCP148-UPS. |
|
Power testing |
Support test function to testing power
supply. |
A-20090420-1502-130-E
*This item is BRAND NEW -
not refurbished. It comes with all manufacturer supplied accessories, and full
manufacturer's USA warranty.
|
