|
Xantrex 805-2000 Prosine 2.0 2000 Watt Sine Wave
Inverter/Charger, 100 A power factor corrected multistage charger, True sine
wave output (crystal controlled); Built-in 30 A transfer switch automatically
transfers between inverter power and incoming AC power; Series stackability for
120/240 VAC (requires two units); UPC 715535520007, Power sharing reduces charging current when AC
loads are activated to prevent tripping of shorepower breaker; Equalization mode
conditions batteries for longer life; Remote Control Panel; Push button control
of power sharing, equalizing, battery set-up, and system configuration
|
General Information |
|
Manufacturer |
Xantrex |
|
Manufacturer Part Number |
805-2000 |
|
Product Name |
Prosine 2.0 2000 Watt Sine Wave Inverter/Charger |
|
UPC Code |
715535520007 |
|
Marketing Information |
Provides 2000 watts of true sine wave AC
power from a DC source and 100-amp multistage battery charging.
A powerful all-in-one solution, Prosine 2.0 inverter/chargers
(part#805-2000 – hardwire version) deliver up to 2000 watts of
unsurpassed clean true sine wave output power and combines this with a
100 amp, multistage battery charger. Series stackability allows for two
units to power 240 VAC applications such as power tools, over ranges,
washer/dryer combinations and air conditioners. The Prosine 2.0 is ideal
for upgrading your electrical system in a boat, RV, or utility vehicle,
for building a standby power system for critical equipment or
incorporating an alternative energy system for a remote home. The system
includes a full function LCD remote control panel and battery
temperature sensor. |
|
Features |
- 2000-watt inverter (4500-watt surge)
- 100 A power factor corrected multistage charger
- True sine wave output (crystal controlled)
- Built-in 30 A transfer switch automatically transfers between
inverter power and incoming AC power
- Series stackability for 120/240 VAC (requires two units)
- Power sharing reduces charging current when AC loads are
activated to prevent tripping of shorepower breaker
- Equalization mode conditions batteries for longer life
- Optional GFCI version available (part#805-2020)
- LCD remote control panel and temperature sensor included
- Compact, lightweight, and easy to install
- Remote Control Panel
- Independent inverter and charger on/off controls
- Push button control of power sharing, equalizing, battery
set-up, and system configuration
- Easy to read backlit digital text messaging display
- Numerically displays AC and DC system information including
volts, amps and state of inverter/charger
- Monitors battery temperature and adjusts charger to provide an
accurate charge in any climate
Protection Features
- Over voltage and under voltage protection
- Over temperature and automatic overload protection
- Short circuit AC backfeed protection
Options
- DC wiring box for residential home installations (part#808-2000)
- GFCI version (part#805-2020)
|
|
Specifications |
|
Electrical Specifications - Inverter |
|
Output power continuous |
2000 watts |
|
Surge rating (5 sec) |
4.5 kW |
|
Output current |
17 A RMS continuous, 50 A peak |
|
Output voltage |
117 VAC RMS |
|
Output frequency |
60 Hz +/- 0.05% (crystal controlled) |
|
Output wave form |
True sine wave <2% THD typical |
|
Efficiency (full load) |
87% |
|
Peak efficiency |
89% |
|
No load power draw (inverting) |
<25 W |
|
No load power draw (search mode, 3 s
interval) |
<2 W |
|
Input DC voltage range |
10 - 16 VDC |
|
Electrical Specifications - Charger |
|
Output current |
100 A DC continuous |
|
Output voltage |
12 VDC nominal |
|
Output voltage range |
0 - 17.5 V |
|
Charge control |
3 stage with manual equalize |
|
Charge temperature compensation |
Remote battery sensor |
|
Efficiency (full load) |
81% typical |
|
AC input power factor |
0.99 |
|
Input current (for 100 A charging) |
15 A RMS nominal |
|
Input AC voltage |
120 VAC nominal |
|
Input AC voltage range |
90 - 135 VAC |
|
General Specifications |
|
Compatible battery types |
Flooded / gel / AGM / Pb-Ca |
|
Transfer relay rating |
30 a, 1/5 HP, 120 VAC |
|
Transfer time (AC to inverter and inverter
to AC) |
16 ms typical |
|
Storage ambient temperature range |
-40°F - 158°F (-40°C - 70°C) |
|
Optimal operating temperature range |
32°F - 104°F (0°C - 40°C) |
|
Operating ambient temperature range |
-4°F - 140°F (-20°C - 60°C derated about
40°C) |
|
Dimensions (H x W x D) |
17.7 x 11.2 x 5.7" (450 x 285 x 145 mm) |
|
Weight |
24.0 lb (11 kg) |
A-20040917-1009-111-L
M-20050126-1009-111-E
M-20061206-1404-130-E
*This item is BRAND NEW -
not refurbished. It comes with all manufacturer supplied accessories, and full
manufacturer's USA warranty.
|
