| General Information
|
| Manufacturer |
XFly |
| Manufacturer Part Number
|
Travel-8URTF |
| Product Name |
Xfold Travel-8URTF Rigs Travel X8
Octocopter |
| UPC Code |
019962579653 |
| Overview |
| The TRAVEL X8 Octocopter from xFold is
designed to strike a balance between versatility and
portability. It features a 3-axis gimbal that will support
cameras weighing up to 3.7 pounds. This makes it perfect
for most DSLRs, mirrorless cameras, and compact video
cameras such as action cameras. Thanks to the inclusion of
two 14-channel transmitters (radio controllers), single-
and dual-operator modes are supported. With two operators,
one will pilot the aircraft while the other will operate
the gimbal and camera. The Amimon CONNEX Full HD video
link is included for the camera operator to see a
high-quality feed in real time. In addition, there is a
5.8 GHz analog downlink as well as two 7" field monitors,
which can be used for FPV (first-person view) |
| Features |
Frame is designed,
manufactured, built and assembled in the usa
Payload capacity of up to
21.8 Lbs
Flexible configurations
for mapping, surveying, inspections, photography and
search and rescue
Dual operators – full hd
live downlink
DJI NAZA V2 flight control
system compatible with all commercial grade flight
controllers
Modular (x8 or x12 motors
and propellers) and folds down to ~30 percent of flight
configuration for Easy transport
Payload distributed over a
large surface area to maximize efficiency
Unique engineering
designed to keep central gravity 100 percent balanced
with quick release Sliding gimbal mounting system
|
| Picture |
|
| Specifications |
| Performance |
Payload Capacity
|
Optimal: 6.6 lbs
Maximum: 21.8 lbs |
Flight Time
|
Up to 15 minutes (depending battery
capacity and conditions) |
| Transmitter |
| Model |
xFold / Futaba T8FG Super
|
| Frequency |
2.4 GHz
|
Number of
Channels
|
14
|
| Battery |
7.2 VDC NiMH |
| Gimbal |
| Model |
xFold / Gremsy H3
|
Number of Axes
|
3 |
| Capacity |
3.7 Lbs
|
Camera
Compatibility
|
DSLR, mirrorless camera, or compact video
camera up to 3.7 lbs
|
FPV
Camera
|
| Resolution |
Not specified by manufacturer |
Video
Downlink - Analog
|
| Frequency |
5.8 GHz
|
Transmit Power
|
600 mW
|
Video Downlink - HD
|
| Model |
Amimon CONNEX
|
| Range |
3300' (outdoor; line-of-sight)
|
| Latency |
Less than 1 ms
|
| Frequency |
5.1 to 5.8 GHz
|
Channel
Selection
|
Automatic frequency selection (AFS)
|
Multicast Mode
|
Up to 4 receivers with no delay or quality
degradation (requires separately available additional
ground unit(s))
|
| Encryption |
AES-128 and RSA 1024 for key exchange
|
Supported
Resolutions
|
1080p: 60, 50, 30, 25, 24 fps
1080i: 60, 50 fps
525i: 60 fps (NTSC)
625i: 50 fps (PAL) |
OSD Support
|
MAVLINK telemetry-based
|
| Connectivity |
Video
Air Unit:
1 x mini HDMI
Ground Unit:
1 x HDMI (Type A)
Antenna
Air Unit:
2 x MMCX
Ground Unit:
5 x SMA
Power
Air Unit:
8 to 26 VDC (3S to 6S)
Ground Unit:
7 to 19 VDC |
Operating Temperature
|
32 to 113 degree fahrenheit / 0 to 45
degree celsius
|
| Dimensions |
Air Unit:
4" x 2.5" x 0.6"
Ground Unit:
5.1" x 3.5" x 0.8"
|
| Weight |
Air Unit:
0.3 Lbs
Ground Unit:
0.6 Lbs
|
FPV
Monitor
|
| Size |
7" |
| Panel |
IPS |
Brightness
|
400 cd/m²
|
Contrast Ratio
|
800:1
|
Resolution
|
1280 x 800
|
| Receiver |
Type: Dual diversity
Number of Channels: 32 |
Flight
Controller
|
Supported ESC
Output
|
400 Hz refresh frequency
|
Supported
Transmitters
|
PCM or 2.4 GHz radio with at least 4
channels
|
Working Range
|
MC: 4.8 to 5.5 V
VU Input: 7.4 to 26.0 V (2S to 6S LiPo recommended)
Output (V-SEN Port Red Wire): 3 A at 5 V (burst current:
7.5 A) |
Power
Consumption
|
MAX: 1.5 W (0.3 A at 5 V)
Normal: 0.6 W (0.12 A at 5V) |
Operating
Temperature
|
14 to 122 degree fahrenheit/ -10 to 50
degree celsius
|
System
Requirements
|
Assistant Software: Windows 8, 7, XP SP3 |
Hovering Accuracy (GPS
Mode)
|
Vertical: More or less 2.6' / More or less
0.8 m
Horizontal: More or less 8.2' / More or less 2.5 m |
Max Angular
Speed
|
200 Degree/s
|
Max Tilt Angle
|
35 degree
|
Ascent/Descent
|
Ascent: 19.7 ft/s / 6 m/s
Descent: 14.8 ft/s / 4.5 m/s |
Weight
|
MC: 0.06 Lbs
PMU: 0.06 Lbs
GPS: 0.06 Lbs
LED: 0.03 Lbs
|
| Dimensions |
MC: 1.8" x 1.3" x 1.3"
PMU: 1.6" x 1.1" x 0.4"
GPS And Compass: 1.8" (diameter) x 0.4"
LED: 1" x 1" x 0.3" |
| Telemetry |
| Model |
DJI iOSD Mini
|
Video Format
|
NTSC
PAL
|
| Supported Flight Control Systems |
WooKong-M
Naza-M
Naza-M V2 |
| Power Requirement |
6 V
|
Working
Current
|
180 mA at 6 V (typical value)
|
Operating
Temperature
|
-4 to 140 degree fahrenheit / -20 to 60
degree celsius
|
| Weight |
0.03 Lbs
|
Flight
Battery
|
| Configuration |
Dual-battery configuration
|
| Chemistry |
Lithium-ion polymer (LiPo)
|
| Capacity |
Included: 8000 mAh (per battery)
Minimum Supported: 6000 mAh
Maximum Supported: 16,000 mAh |
| Configuration |
6S |
Discharge Rate
|
35C |
| Motors |
| Model |
xFold / T-Motor 4014
|
Motor Velocity
Constant
|
330 Kv
|
ESC
|
40 A |
Propellers
|
| Size |
Recommended: 12" to 15"
Included: 16" x 4.5" (top) / 15" x 4.5" (bottom) |
| General |
| Configuration |
X8 |
| Dimensions |
Flight Configuration: 23.6" x 22.6" x 24"
Folded: 17.9" x 11.7" |
| Weight |
8.6 lb (includes motors, propellers, flight
controller, landing gear) |
| Shipping |
| Dimensions |
23.6" x 24.0" x 22.6" |
| Weight |
71 Lbs
|
