Yamaha MG32/14FX MG-Series 32-Input Mixing
Console, Frequency Response 0 +1, -3 dB 20 Hz - 20 kHz @ +4 dB 600 Ohm (ST OUT);
MONO Out Low Pass Filter 80 - 120 Hz 12dB/octave, High Input Capacity for Live
Sound, Top-quality Microphone Preamps, Switchable Phantom Power, Mid-sweep
3-band Mono Channel EQ, 4-band Stereo Channel EQ, Multi-bus Configuration with a
Total of 14 Buses, Comprehensive Output Connectors, Reliable XLR Output
Connectors, High-performance Digital Effect Processors Built In, Illuminated
Switches for High Visibility, Intuitive Controls and High Reliability
General Information |
Manufacturer |
Yamaha |
Manufacturer Part Number |
MG32/14FX |
Product Name |
MG-Series 32-Input Mixing Console |
Overview |
This 32-input model is suitable for
serious live sound applications in which a substantial number of sources
must be handled efficiently. The MG32/14FX also feature dual Yamaha SPX
effect processors built in, so you have everything you need for great
sound right in the console. A comprehensive complement of auxiliary and
group buses provides extensive mixing and signal routing versatility. |
Features |
- Serious Consoles for Live Sound or
Installations
The MG32/14FX is a full-featured sound reinforcement consoles with
capacity and capabilities that can handle demanding live sound
applications. Professional features, including two renowned Yamaha
SPX effect processors are built in, along with extensive routing
capability for monitoring and external signal processing, as
required by your application.
- High Input Capacity for Live Sound
The MG32/14FX has 24 mono inputs and 4 stereo inputs. Input gain
controls and pad switches allow optimum matching with the widest
possible range of sources: microphone levels can be adjusted from
-60 dB to +10 dB, while line levels can be adjusted from -34 dB to
+10 dB. Channel peak indicators are provided to facilitate optimum
level matching.
- Versatile Inputs
The monaural inputs, channels 1 through 24, provide both balanced
XLR and phone jacks. Two of the stereo inputs offer phone jacks as
well as RCA pin jacks. Independent 2-track RCA pin jack inputs are
also provided for input from CD players or other stereo line-level
sources.
- Top-quality Microphone Preamps
Microphone preamplifiers play a vital role in determining the final
sound of your mixes. The MG-series mixers feature low-noise,
high-performance microphone preamplifiers that will bring out the
best in dynamic and condenser type microphones. Microphone
preamplifiers are provided on input channels 1 through 24 of the
MG32/14FX.
- Switchable Phantom Power
The MG mixer microphone preamplifiers provide 48-volt phantom power
for studio-quality condenser microphones. Phantom power can be
switched on or off for in 8-channel groups.
- Insert I/O
Mono input channels feature insert patch points that can be used to
insert external signal-processing devices into the channel's signal
path. Insert I/O points are also provided on the stereo bus (L and
R) and on the four group buses.
- Mid-sweep 3-band Mono Channel EQ,
4-band Stereo Channel EQ
The mono channels on both the MG32/14FX offer advanced EQ
facilities: 3-band EQ with a 10 kHz shelving HIGH control, a 250 Hz
~ 5 kHz sweepable MID control, and a 100 Hz shelving LOW control.
The microphone inputs also have switchable 80 Hz high-pass filters
for low-frequency noise reduction. The stereo channels feature
4-band EQ with 10 kHz HIGH, 3 kHz HI MID, 800 Hz LO MID, and 100 HZ
LOW controls.
- Multi-bus Configuration with a
Total of 14 Buses
In addition to the main stereo bus that feeds the console's main
outputs, the MG32/14FX features four group buses for convenient
sub-mix grouping, six auxiliary buses for monitoring and external
effect send, and send buses for the two internal effect processors.
That's a total of 14 buses in all for exceptionally flexible signal
routing. The channel send knobs and bus assign switches make it easy
to send the signal from each channel to the stereo, group, internal
effect, and auxiliary buses as required.
- Ample Sends and Returns
All input channels have a total of six auxiliary sends: AUX send 1
through 4 can be switched for pre- or post-fader operation, while
AUX sends 5 and 6 are post-fader. Two EFFECT sends are provided in
addition to the six AUX sends. That's more than sufficient send
capability to handle monitoring and effects for all but the most
complex applications. Two stereo AUX returns are provided in
addition to the internal effect returns, providing an extra margin
of return versatility for wet monitoring, for example.
- Comprehensive Output Connectors
The mixer's main stereo program signal is simultaneously delivered
to the main stereo outputs (XLR jacks), the sub-stereo outputs
(phone jacks), the REC OUT connectors (RCA pin jacks), the mono out
(XLR jack), and the headphones output (stereo phone jack).
Independent phone-jack outputs are also provided for group buses 1
through 4. So even if you need to feed a front-of-house system,
monitors, a subwoofer, a master recorder, and other output lines
simultaneously, the MG32/14FX will handle it.
- Reliable XLR Output Connectors
The main stereo outputs and mono output feature rugged, reliable XLR
type connectors. Not only do these connectors lock to minimize the
chance of accidental disconnection, but they provide superior
electrical contact for long-term dependability as well.
- Variable LPF on the Mono Output
A low-pass filter with a roll-off frequency that can be varied from
80 to 120Hz is provided on the mono output for convenient connection
and optimum matching with a subwoofer.
- 12-segment Level Meters
Four high-visibility 12-segment meters are switchable to allow
precise visual monitoring of levels on the main stereo bus, the four
group buses, the stereo 2-track input, the PFL (Pre-Fader Listen)
bus, or the AFL (After-Fader Listen) bus.
- High-performance Digital Effect
Processors Built In
The MG32/14FX contains a powerful pair of Yamaha digital signal
processors that provide a useful selection of 16 advanced digital
effects. Effect programs include reverb, delay, pitch change chorus,
phaser, voice doubler, and distortion. The effects include editable
parameters so they can be customized as required, and processor "B"
even has a TAP switch for real-time tap-tempo entry. With these
top-performance effect processors built in, you won’t have to
transport and set up racks of external effects to create your sound.
- Illuminated Switches for High
Visibility
The channel ON switches, PFL (Pre-Fader Listen) switches and phantom
power switches are original Yamaha illuminated types, so it's easy
to visually check vital console settings.
- Talkback for Convenient
Communication
A talkback microphone input is provided for easy, efficient
communication between the sound engineer and musicians and staff in
live-sound applications, during setup, rehearsal, and the actual
performance.
- Intuitive Controls and High
Reliability
The design of the faders, rotary controls and switches used on the
MG mixers, as well as the way they are laid out, allow easy
operation and visual confirmation of settings.
|
Specifications |
Total Harmonic
Distortion |
Less than 0.1 % (THD+N) 20 Hz - 20 kHz @
+14 dB 600 Ω (ST OUT) |
Frequency Response |
0 +1, -3 dB 20 Hz - 20 kHz @ +4 dB 600 Ω
(ST OUT) |
Input Hum & Noise |
-128dB 20 Hz - 20 kHz, Rs=150 Ω, Input
Gain=Maximum, Input Pad =OFF, Input sensitivity=-60 dB |
Crosstalk |
-70dB @ 1kHz, Mic: 24+1 (Input A 1 - 24,
Talk Back: XLR), Line: 24 (Input B 1 - 24: TRS) |
CH Input |
Line: 24 (Input B 1 - 24: TRS), Stereo: 2
(Ch 25 - 26, 27 - 28:TRS) * Ch25, 27:L (MONO) 2 (Ch 29 - 30, 31 - 32:
TRS/RCA), Insert I/O: 24 (Ch 1 - 24: TRS T: Out, R: In, S: Gnd) |
AUX |
Send: 6 (1 - 2/Post-Pre selectable, 3 -
4/Post-Pre selectable, 5 - 6/Post: TRS), Return: 2 Stereo Sub In
(L/MONO, R: TRS) |
Effects |
Send: 2 (1, 2: TRS) |
2TR |
In: 1 Stereo (L, R: RCA) |
STEREO IN |
1 Stereo (L, R: TRS) |
Group IN |
4 (1 - 4: TRS) |
REC Out |
1 Stereo (L, R: RCA) |
ST OUT |
1 Stereo (L, R: XLR) |
Mono |
Out: 1 (XLR) |
ST SUB |
Out: 1 Stereo (L, R: TRS) |
Group Out |
4 (1 - 4: TRS) |
Phones |
1 (TRS Stereo) |
Phantom Power |
+ 48 V |
CH & ST Ch Input Gain Control |
44 dB valiable |
CH & ST High pass filter |
80 Hz 12 dB/Octave |
CH EQ (MONO) ±15 dB (Max.) |
High 10 kHz (Shelving)
Mid 0.25-5 kHz (Peaking)
Low 100 Hz (Shelving) |
CH EQ (STEREO) ±15 dB (Max.) |
High 10 kHz (Shelving)
Hi-Mid 3 kHz (Peaking)
Low-Mid 800 Hz (Peaking)
Low 100 Hz (Shelving) |
MONO Out Low Pass Filter |
80 - 120 Hz 12dB/octave |
Internal Digital Effect |
SPX x 2 (Effect 1: 16 Programs, Effect 2:
16 Programs :Parameter Control) |
Product Dimension (W x H x D) |
41.73" x 5.90" x 21.25" |
Weight (lbs.) |
52.91 lbs. |
Power Requirements |
UL/CSA: 75 W 120 V/60 Hz |
A-20121227-1250-130-L
*This item is BRAND NEW -
not refurbished. It comes with all manufacturer supplied accessories, and full
manufacturer's USA warranty.
|