|
Zoom 5654-00-00AF ADSL 2/2+ Modem/Router/Gateway/Firewall/4-port
Switch with Ethernet and USB Interfaces, Full-rate adaptive ADSL Annex A modem,
Built-in router provides shared Internet access for a maximum of 253 concurrent
users, Built-in 10/100 four-port Ethernet switch, Allows concurrent use of
Ethernet and USB ports for Internet sharing, NAT firewall, Security features
include user authentication, PAP, CHAP, and password-protected system management,
Logs and controls all incoming and outgoing Internet traffic, Works with most
computer operating systems, including Windows, Macintosh, Linux, Stateful Packet
Inspection (SPI), SNMP Support, Auto configuration.
|
General Information |
|
Manufacturer |
Zoom |
|
Manufacturer Part Number |
5654-00-00AF |
|
Product Name |
ADSL 2/2+ Modem/Router/Gateway/Firewall/4-port
Switch |
|
Marketing Information |
|
The ADSL X5 integrates an ADSL 2/2+ modem,
a router, a NAT firewall, and a four -port 10/100 Ethernet switch into a
single cost-effective product. Up to five computers can plug directly
into the X5 with concurrent operation of both the USB and Ethernet ports.
The model 5564 is compatible with older ADSL protocols as well as the
new ADSL 2/2+ standards for download speeds of up to 24 Mbps and
extended distances at which high data rates can be delivered. |
|
Features |
-
ADSL 2/2+ for download
speeds of up to 24 Mbps
-
Full-rate adaptive
ADSL Annex A modem
-
Built-in router
provides shared Internet access for a maximum of 253 concurrent
users
-
Built-in 10/100 four-port
Ethernet switch
-
Allows concurrent use
of Ethernet and USB ports for Internet sharing
-
NAT firewall
-
Security features
include user authentication, PAP, CHAP, and password-protected
system management
-
Logs and controls all
incoming and outgoing Internet traffic
-
Works with most
computer operating systems, including Windows, Macintosh, Linux
-
Stateful Packet
Inspection (SPI)
-
SNMP Support
-
Auto configuration
-
Universal Plug and
Play (UPnP)
|
|
Specifications |
|
ADSL Compliance |
Compliant with ADSL
standards:
- Full-rate ANSI T1.413 Issue 2, ITU G.dmt (G.992.1) standards
- ITU G.lite (G.992.2) specification
Compliant with ADSL 2 standards:
- ITU G.992.3
- ADSL Annex L (reach extended DSL)
Compliant with ADSL 2+ standards:
- G.992.5
DMT modulation and demodulation
Full-rate adaptive modem
- Maximum downstream rate of 24 Mbps
- Maximum upstream rate of 1024 Kbps
Supports splitterless ADSL implementation
Interoperable with all major DSLAM manufacturers |
|
ATM Protocols |
WAN mode support: PPP over ATM (RFC 2364)
and PPP over Ethernet (RFC 2516)
LAN mode support: Bridged/Routed IP over ATM (RFC 1483) and
Classical IP over ATM (RFC 1577)
ATM Forum UNI 3.1/4.0 PVC
Up to eight virtual circuits
ATM segmentation and re-assembly
ATM AAL5 (adaption layer type 5)
OAM F4/F5 |
|
Bridge Mode |
Ethernet to ADSL self learning -
Transparent Bridging (IEEE 802.1D)
Supports up to 128 MAC learning addresses |
|
Router Mode |
Static routing
DNS Proxy
IP filtering
DHCP (Dynamic Host Configuration Protocol) server and client and Relay
NAT (Network Address Translation)
NAPT (Network Address and Port Translation)
RIP V1 and V2
PPP Half Bridge
Dynamic DNS
Virtual Server/DMZ Support
Simultaneous USB and Ethernet operation |
|
Security |
Stateful Packet Inspection (SPI)
User authentication for PPP
PAP (Password Authentication Protocol)
CHAP (Challenge Authentication Protocol)
Password protected system management
VPN passthrough: PPTP, L2TP, IPsec tunneling
Bridge filtering
Blocked Protocols
Black Lists
Attack Protection
Denial of Service Protection
Port Scan Detection and Prevention
Parental Control |
|
Ethernet Interface
|
IEEE 802.3 compliant
Four 10/100 Mbps auto-sensing RJ-45 ports |
|
USB Interface
|
Compliant with USB Specification, Revision
1.1
Full-speed USB (12 Mbps) |
|
Management
|
Password protected access
Auto configuration of ADSL networking settings
Universal Plug and Play (UPnP)
SNMP Version 1 and 2
Remote and local command line or HTTP interface configuration
Software upgradeable firmware through HTTP interface
ATM traffic management functions support UBR, CBR, rt-VBR, nrt-VBR in
accordance
with ATM forum TM 4.1
SNTP (Simple Network Time Protocol)
Loads setup from a file for easy configuration input by service
providers |
|
Status Indicators
|
Seven indicators - power, DSL, four
Ethernet port connection indicators, USB connection |
|
HTML graphic user Interface |
Firmware upgrades
WAN and LAN side connection statistics
Configuration of static routes and routing table
Selection of bridge or router mode
PPP user ID and password
Configuration of virtual circuits |
|
System Requirements |
A computer with an Ethernet port and any
operating system that supports TCP/IP (Windows, Mac, Linux or other) or
a computer with a USB port and running Windows |
A-20080901-1071-149-E
*This item is BRAND NEW - not
refurbished. It comes with all manufacturer supplied accessories, and full
manufacturer's USA warranty.
|
