Computer Products > Fiber Converters > TRENDnet TFC-210S20D5 TX to 100Base-FX Dual-Wavelength Single-Mode Fiber Converter, Compliant with IEEE 802.3 10Base-T and IEEE 802.3u 100Base-TX, 100Base-FX standards, One 10/100Base-TX Auto-Negotiation, Auto-MDIX RJ-45 port, One 100Base-FX Dual-Wavelength Single-Mode Single-Strand SC-type Fiber port, Supports Link Loss Carry Forward (TFC 210S20D5 TFC210S20D5 TFC-210S20D5)
|
|
|
|
TRENDnet TFC-210S20D5 TX to 100Base-FX Dual-Wavelength Single-Mode Fiber
Converter, Compliant with IEEE 802.3 10Base-T and IEEE 802.3u 100Base-TX,
100Base-FX standards, One 10/100Base-TX Auto-Negotiation, Auto-MDIX RJ-45 port,
One 100Base-FX Dual-Wavelength Single-Mode Single-Strand SC-type Fiber port,
Supports Link Loss Carry Forward ,
802.3x flow control for 10/100Base-TX port,
Plug & Play, Hot Pluggable, Diagnostic LEDs.
|
General Information |
|
Manufacturer |
TRENDnet |
|
Manufacturer Part Number |
TFC-210S20D5 |
|
Product Line |
Fiber Converters |
|
Product Name |
TFC-210S20D5 TX to 100Base-FX Dual-Wavelength Single-Mode Fiber
Converter |
|
Marketing
Information |
|
TFC-210S20D3 Bi-Directional Single-Fiber Media
Converter transforms 10/100Mbps-TX UTP/STP media to 100Base-FX media and
vice versa. The 10/100Mbps-TX Port Auto-Negotiating 10 or 100Mbps connection
speed with Auto-MDIX media type, the fiber supports single-mode SC type
connection. This converter will give your Switch/Hub the ability to
interface with fiber connection over a distance up to 20 km. |
|
Features |
- Compliant with IEEE 802.3 10Base-T and
IEEE 802.3u 100Base-TX, 100Base-FX standards
- One 10/100Base-TX Auto-Negotiation/Auto-MDIX
RJ-45 port
- One 100Base-FX Dual-Wavelength Single-Mode
Single-Strand SC-type Fiber port
- Supports LLCF (Link Loss Carry Forward)
- Provides Dip switch to set: UTP (Auto
Negotiation/Full Duplex), Fiber (Hall Duplex/Full Duplex) , LLCF (Enable/Disable),
Mode (Pure Converter Mode/ Switch Converter Mode)
- 802.3x flow control for 10/100Base-TX
port
- Plug & Play, Hot Pluggable
- Diagnostic LEDs
- Optional 19” Fiber Converter Chassis (TFC-1000)
holds up to 10 Fiber Converters
|
|
Specifications |
|
Hardware |
|
Standard |
IEEE 802.3 10Base-T
IEEE 802.3u 100Base-TX, 100Base-FX |
|
Network Media |
10Base-T: UTP/STP Cat. 3, 4, 5, EIA/TIA-568 100-ohm
100Base-TX: UTP/STP Cat. 5, EIA/TIA-568 100-ohm
100Base-FX: 9/125um Single-Strand Fiber Optic Cable, up to 20km |
|
Minimum Cable Length |
50 Meters |
|
Protocol |
CSMA/CD |
|
Frame Packet Size
|
64 to 1600 Bytes |
|
Ports |
1 x 10/100Base-TX: RJ-45 Port
1 x 100Base-FX : Single-Mode Bi-Directional SC-Type Fiber Port |
|
Dip Switch |
Dip Switch 1: ON: TX Port Fully Duplex
OFF: TX Port Auto- Negotiation
Dip Switch 2: ON: FX Port Half Duplex
OFF: FX Port Full Duplex
Dip Switch 3: ON: LLCF Enable
OFF: LLCF Disable
Dip Switch 4: ON: Pure Converter Mode
OFF: Switch Converter Mode
* After changing the DIP Switch settings, power cycle the Fiber Converter |
|
Transfer Rate |
100Mbps (Half/Full Duplex) |
|
|
Per Device: Power
Per Port (TX): 100Mbps, Link/Activity, Full Duplex/Collision
(FX): Link/Activity, Full Duplex/Collision |
|
Power Adapter |
9V DC, 700mA External Power Adapter |
|
Power Consumption
|
3.1 Watts (max) |
|
Dimensions
|
85 x 125 x 25mm (3.35 x 4.92 x 0.98in.) |
|
Weight |
300g (10.6oz.) |
|
Temperature |
Operating : 0° C ~ 45° C (32° F ~ 113° F)
Storage : -40° C ~ 70° C (-40°F ~ 158° F) |
|
Humidity |
5% ~ 90% RH |
|
Certification |
CE, FCC |
|
Media |
WDM
(Single Mode) |
|
Wavelength |
TX:1550nm (1480nm~1580nm)
RX:1310nm (1260nm~1360nm) |
Power Output
(dBm) |
-14 |
Sensitivity
(dB) |
-31 |
Power
(dBm) |
17 |
|
Distance |
20KM |
A-20070430-1357-138-E
*This item is BRAND NEW - not refurbished. It comes with all manufacturer supplied accessories, and full manufacturer's USA warranty.
|
